Japan Trust Technology USB LED Bar Light Sensor-Equipped Cordless Bar Light Wide 10cm LEDBARSBT-WD10

4520008262690

B0F2MVD92Z

LEDBARSBT-WD10

Japan Trust Technology - LED Bar Light - LEDBARSBT-WD Series - Equipped with Motion Sensor - Built-in Battery. Place this product in a dark location. The motion sensor automatically activates the LED light when motion is detected, and automatically turns it off after approximately 20 seconds if there is no motion. It's ideal for use as a nighttime auxiliary light in dark areas like closets, stairwells, and hallways. It also features a handheld mode that keeps all LEDs constantly lit, making it ideal for emergency lighting.

■ Equipped with high-brightness LEDs that provide a wide, bright light. The wide body features two different LED colors (daylight and warm white). It produces a soft, bright light.・LEDBARSBT-WD10: 16 lights (8 daylight/8 warm white) ・LEDBARSBT-WD20: 32 lights (16 daylight/16 warm white) ・LEDBARSBT-WD30: 44 lights (22 daylight/22 warm white) ・LEDBARSBT-WD40: 56 lights (28 daylight/28 warm white) ・LEDBARSBT-WD48: 64 lights (32 daylight/32 warm white)

■Automatically turns on with motion sensor This product's motion sensor responds within a range of up to 3m (120 degrees). After turning on, if there is no response, it will automatically turn off after approximately 20 seconds.

■All LEDs on simultaneously. Always-on handheld light mode Equipped with a "Always-on mode" that keeps all LEDs on at all times to brightly illuminate the surroundings. When fully lit, the daylight and warm white LEDs light up simultaneously, simulating a natural, bright, daylight white light.

■Easy Switch Operation
▪️Mode Switching: Briefly press the button to switch between modes. Daylight Motion Detection Mode → Warm White Motion Detection Mode → Always On Mode → Off
▪️Brightness Adjustment: The LED brightness changes while you hold down the button (long press). Release the button when you reach your desired brightness. *Brightness settings are common to all modes.

■Battery-Powered for Any Use This battery-powered LED light can be recharged via USB power (5V/1A) for repeated use. While charging, the pilot light will glow red. When fully charged, the pilot light will glow green.

■Easy Installation: Attach the included magnetic sticker to the light body for easy installation on steel racks and other surfaces. The included metal plate also makes it easy to install on wooden furniture and shelves. *Please clean any dirt or dust from the mounting surface before use. *Depending on the installation location (materials and paint of tables, furniture, etc.), scratches or paint peeling may occur, so please use with caution before installation. Specifications: 10cm model: 16 LEDs (8 daylight/8 warm white); Size: Approx. 100 x 40 x 20mm; Weight: Approx. 30g; 20cm model: 32 LEDs (16 daylight/16 warm white); Size: Approx. 200 x 40 x 20mm; Weight: Approx. 45g; 30cm model: 44 LEDs (22 daylight/22 warm white); Size: Approx. 300 x 40 x 20mm; Weight: Approx. 58g; 40cm model: 56 LEDs (28 daylight/28 warm white); Size: Approx. 400 x 40 x 20mm; Weight: Approx. 85g; 48cm model: 64 LEDs (32 daylight/32 warm white); Size: Approx. 480 x 40 x 20mm; Weight: Approx. 96g Color Selection: Daylight (in motion sensor mode), Warm White (inertia), Daylight White (full light, simulated). Input Power: USB 5V/1A. Motion Sensor: Maximum distance approximately 3m, maximum range approximately 120°. Auto-Off: Approximately 20 seconds. Charging Time: Approximately 1 hour. Continuous Lighting Time: Approximately 1 hour. Accessories: USB charging cable (TYPE-C), magnetic sticker, metal sticker. Product Warranty: 3 months from the date of purchase. *The warranty does not apply to use outside the product's specifications. Not waterproof, for indoor use only. *We are not responsible for any malfunctions, damage, or data loss that may occur during use of this product. *Product specifications are subject to change without notice for performance improvement purposes. *Due to the color reproduction characteristics of computer monitors, the actual product color and image may differ slightly from the image shown. Brand Name: Nippon Trust Technology. USB cable, magnetic sticker, metal sticker. Material: Plastic. This cordless bar light with a sensor provides bright, soft illumination with a wide light-emitting area. You can choose between daylight and warm white, or mix (mix only for constant lighting). The wide body features two different LED colors (daylight and warm white). It produces a soft, bright light. Brightness can also be adjusted with the touch of a button. This product's motion sensor responds within a range of up to 3m (120 degrees). Once activated, it automatically turns off after approximately 20 seconds if there is no response. It also features a "constant full-on" mode, which keeps all LEDs on at all times to brighten the surroundings. When fully lit, both the daylight and warm white LEDs light up simultaneously, simulating a natural, bright, daylight white light. It can be recharged via USB power (5V/1A) for repeated use. Attach the included magnetic sticker to the light body for easy installation on steel racks and other surfaces. The included metal plate also makes it easy to install on wooden furniture and shelves. 10cm model. LEDs: 16 (8 daylight, 8 warm white). Size: Approx. 100 x 40 x 20mm. Weight: Approx. 30g. Color: Daylight (in motion sensor mode), Warm White (not activated), Daylight White (simulated when all lights are on). Power input: USB 5V/1A. Motion sensor: Maximum distance: Approx. 3m, Maximum range: Approx. 120°. Auto-off: Approx. 20 seconds. Charging time: Approx. 1 hour. Continuous lighting time: Approx. 1 hour. Accessories: USB charging cable (TYPE-C), magnetic sticker, metal sticker. Product warranty: 3 months from date of purchase. *The warranty does not apply to use outside the product's specifications. Not waterproof. For indoor use only. 4520008262690 Japan Trust Technology USB LED BAR Light, Cordless Bar Light with Sensor, Wide, 10cm, LEDBARSBT-WD10 (text created at , 2025-06-30)

- mm

- g