20A Socket (Mechanical Fitting for Three Pipe Types)

4548745783124

B00AXUL1DC

EA469H-20

X: 60mm, A: 77mm

Nominal: 20A Nut Face-to-Face Width (F): 51mm Nut Height (H): 19mm End Face/End Face Spacing: X: 60mm, A: 77mm Material: Body/Nut: Malleable Cast Iron (Hot-Dip Galvanized), Lock Ring/Collars: Steel, Gasket: NBR Weight: 480g Maximum Working Pressure: Water/Air/Oil: 1.0MPa (10.2kgf/cm²), City Gas/LPG: 0.3MPa (3.1kgf/cm²). The maximum operating pressure for polyethylene pipes is 0.75MPa (7.6kgf/cm²). Oil refers to kerosene, heavy oil, lubricating oil, hydraulic fluid, etc. Not suitable for hydraulic fluids containing additives. Operating temperature range: -10°C/60°C (0°C/40°C for water). For use exceeding 60°C, replace the packing with a heat-resistant type. Applicable pipe types: JIS G3452: Carbon steel pipes for piping, JIS G3442: Galvanized steel pipes for water piping, JWWAK116: Rigid vinyl chloride lined steel pipes for water supply (VA, VB), JWWAK132: Polyethylene Powder-Lined Steel Pipes for Water Supply (PA, PB), JIS K6741: Rigid Polyvinyl Chloride Pipes (VP) ※Replacement of gasket set required for nominal sizes 25, 30 ※Not usable for nominal sizes 65, 80, JIS K6742: Rigid PVC Pipes for Water Supply (VP, HIVP for Water Supply) ※Packing set replacement required for sizes 25, 30 ※Not usable for sizes 65, 80, JIS K6762: Polyethylene Two-Layer Pipes for Water Supply (Type 1) ※Incore required for sizes 30, 40, 50 ※Not usable for sizes 65, 80

Brand Name: Esco
Material: Body/Nut: Malleable Cast Iron (Hot-Dip Galvanized)
Nominal Size: 20A
Nut Face-to-Face Width (F): 51mm
Nut Height (H): 19mm
Face-to-Face Size: X: 60mm, A: 77mm
Material: Body/Nut: Malleable Cast Iron (Hot-Dip Galvanized), Lock Ring/Collars: Steel, Gasket: NBR
4548745783124
20A Socket (Mechanical Fitting for 3 Pipe Types)
(text created at , 2025-06-30)

250x100x250 mm

2000 g