25Ax15AxRc1/2 Different-Diameter Threaded/Mechanical Fittings

4548745784800

B00AXUKQPG

EA469HH-2

B: 36mm, X: 41mm, A: 51.5mm

Nominal: 25A × 15A Thread Size (D): Rc(PT) 1/2 Nut Face-to-Face Width: 59 × 44 mm Nut Height: 21 × 19 mm Face-to-Center Size: B: 36 mm, X: 41mm, A: 51.5mm Material: Body/Nut: Malleable Cast Iron (Hot-Dip Galvanized), Lock Ring/Collars: Steel, Gasket: NBR Weight: 720g Maximum Working Pressure: Water/Air/Oil: 1.0MPa (10.2kgf/cm²), City Gas/LPG: 0.3MPa (3.1kgf/cm²) Maximum operating pressure for polyethylene pipes is 0.75MPa (7.6kgf/cm²). Oil refers to kerosene, heavy oil, lubricating oil, hydraulic fluid, etc. Not suitable for hydraulic fluid containing additives. Operating temperature range: -10°C/60°C (0°C/40°C for water). For use exceeding 60°C, replace the gasket with a heat-resistant type. Applicable pipe types: JIS G3452: Carbon steel pipes for piping, JIS G3442: Galvanized steel pipes for water piping, JWWAK116: Rigid vinyl-lined steel pipes for water supply (VA, VB), JWWAK132: Polyethylene Powder-Lined Steel Pipes for Water Supply (PA, PB), JIS K6741: Rigid Polyvinyl Chloride Pipes (VP) ※Nominal 25, 30 require gasket set replacement ※Not usable for Nominal 65×50, 80×50, JIS K6742: Rigid PVC Pipes for Water Supply (VP, HIVP for Water Supply) ※Replacement of packing set required for sizes 25 and 30 ※Not usable for sizes 65×50 and 80×50, JIS K6762: Polyethylene Two-Layer Pipes for Water Supply (Type 1) ※ Nominal sizes 30, 40, 50 require an insert ※Not usable with nominal sizes 65×50, 80×50

Brand Name: Esco
Material: Body/Nut: Malleable Cast Iron (Hot-Dip Galvanized)
Nominal Size: 25A×15A
Thread Size (D): Rc(PT)1/2
Nut Face Width: 59×44mm
Nut Height: 21×19mm
End Face/Center-to-Center Size: B: 36mm, X: 41mm, A: 51.5mm
Material: Body/Nut: Malleable Cast Iron (Hot-Dip Galvanized), Lock Ring/Collars: Steel, Gasket: NBR
Weight: 720g
Maximum Working Pressure: Water/Air/Oil: 1.0MPa (10.2kgf/cm²), City Gas/LPG: 0.3MPa (3.1kgf/cm²)
Maximum working pressure for polyethylene pipe is 0.75MPa (7.6kgf/cm²).
4548745784800
“25Ax15AxRc1/2” “Different Diameter Threaded Tee / Mechanical Fitting”
(text created at , 2025-05-09)

250x100x250 mm

2000 g