ELECOM TV Anti-Tip Earthquake-Resistant Rubber Belt (2-Pack) Supports up to 75-inch TVs, VESA Hole Compatible [Passed Earthquake Resistance Test Equivalent to Magnitude 7 / Made in Japan] TS-007 White
JAN
4549550256230
ASIN
B0B8BKQZML
Maker
Model No.
TS-007
Color
Size
Description
ELECOM - Supports up to 75-inch screens - VESA hole compatible - Passed earthquake resistance testing equivalent to seismic intensity 7 - TS-007
■Compatible Screen Size: Up to 75-inch
■Dimensions: Plate (with adhesive): Width 90mm × Depth 90mm × Height 15.6mm, Rubber Belt: Width 27mm × Thickness 5mm × Height 400mm
■Weight: Plate (1 piece): 35g, Rubber Belt (1 piece): 24g
■Color: White
■Material: Plate: ABS Resin, Rubber Belt: Butyl Rubber
■Contents: 2 Plates (with adhesive), 2 Rubber Belts, Screws (M4×16, M6×16) 2 each, Common Washers 2
■This earthquake-resistant rubber belt attaches to the back of your TV to absorb shaking during earthquakes and prevent tipping.
■Passed vibration testing equivalent to seismic intensity 7, withstanding simulated waves from the Great East Japan Earthquake, Kumamoto Earthquake, and Great Hanshin-Awaji Earthquake.
■※This product minimizes tipping due to shaking but does not assume responsibility for damage or accidents caused by earthquakes or other events.
■Secure the rubber band to the VESA holes (wall-mounting screw holes) on the back of the TV using the included screws.
■Attach the plate to the top of the TV stand, the floor, or a wall using the strong adhesive seal.
■※To ensure stable adhesion, do not move the TV for 72 hours after installation.
■※Please note that peeling off the adhesive seal after application will reduce its adhesive effectiveness.
■If the plate is installed close to the TV, you can double the rubber belt by threading it through the plate's tunnel section. This shortens the belt length, making the setup more stable against tipping.
■Made in Japan for peace of mind. ELECOM General Information Center TEL. 0570-084-465 FAX. 0570-050-012 Hours: 10:00 AM - 7:00 PM, Open year-round
Brand Name: ELECOM
2 adhesive plates, 2 rubber belts, 2 screws (M4, M6) each, 2 common washers
Material: Plate: ABS resin, Rubber belt: Butyl rubber
This earthquake-resistant rubber belt attaches to the back of your TV to absorb shaking during earthquakes and prevent tipping.
It passed vibration tests equivalent to seismic intensity 7, including simulations of the Great East Japan Earthquake, Kumamoto Earthquake, and Great Hanshin-Awaji Earthquake.
*This product minimizes tipping due to shaking but does not assume responsibility for damage or accidents caused by earthquakes or other events.
Secure the rubber bands to the VESA holes (wall-mounting screw holes) on the back of the TV using the included screws.
Attach the plate to the top of the TV stand, floor, wall, etc., using the strong adhesive seal.
*To ensure stable adhesion, do not move the unit for 72 hours after installation.
※Note: Removing the adhesive seal after application will reduce its effectiveness.
If the plate is installed very close to the TV, you can double the rubber belt by using the plate's tunnel section. This shortens the belt length, further enhancing stability.
Made in Japan for peace of mind.
4549550256230
ELECOM TV Anti-Tip Earthquake-Resistant Rubber Belt (2-Pack) Supports up to 75 inches, VESA Hole Compatible [Passed Earthquake Resistance Test Equivalent to Magnitude 7 / Made in Japan] TS-007 White
(text created at , 2025-05-09)
■Compatible Screen Size: Up to 75-inch
■Dimensions: Plate (with adhesive): Width 90mm × Depth 90mm × Height 15.6mm, Rubber Belt: Width 27mm × Thickness 5mm × Height 400mm
■Weight: Plate (1 piece): 35g, Rubber Belt (1 piece): 24g
■Color: White
■Material: Plate: ABS Resin, Rubber Belt: Butyl Rubber
■Contents: 2 Plates (with adhesive), 2 Rubber Belts, Screws (M4×16, M6×16) 2 each, Common Washers 2
■This earthquake-resistant rubber belt attaches to the back of your TV to absorb shaking during earthquakes and prevent tipping.
■Passed vibration testing equivalent to seismic intensity 7, withstanding simulated waves from the Great East Japan Earthquake, Kumamoto Earthquake, and Great Hanshin-Awaji Earthquake.
■※This product minimizes tipping due to shaking but does not assume responsibility for damage or accidents caused by earthquakes or other events.
■Secure the rubber band to the VESA holes (wall-mounting screw holes) on the back of the TV using the included screws.
■Attach the plate to the top of the TV stand, the floor, or a wall using the strong adhesive seal.
■※To ensure stable adhesion, do not move the TV for 72 hours after installation.
■※Please note that peeling off the adhesive seal after application will reduce its adhesive effectiveness.
■If the plate is installed close to the TV, you can double the rubber belt by threading it through the plate's tunnel section. This shortens the belt length, making the setup more stable against tipping.
■Made in Japan for peace of mind. ELECOM General Information Center TEL. 0570-084-465 FAX. 0570-050-012 Hours: 10:00 AM - 7:00 PM, Open year-round
Brand Name: ELECOM
2 adhesive plates, 2 rubber belts, 2 screws (M4, M6) each, 2 common washers
Material: Plate: ABS resin, Rubber belt: Butyl rubber
This earthquake-resistant rubber belt attaches to the back of your TV to absorb shaking during earthquakes and prevent tipping.
It passed vibration tests equivalent to seismic intensity 7, including simulations of the Great East Japan Earthquake, Kumamoto Earthquake, and Great Hanshin-Awaji Earthquake.
*This product minimizes tipping due to shaking but does not assume responsibility for damage or accidents caused by earthquakes or other events.
Secure the rubber bands to the VESA holes (wall-mounting screw holes) on the back of the TV using the included screws.
Attach the plate to the top of the TV stand, floor, wall, etc., using the strong adhesive seal.
*To ensure stable adhesion, do not move the unit for 72 hours after installation.
※Note: Removing the adhesive seal after application will reduce its effectiveness.
If the plate is installed very close to the TV, you can double the rubber belt by using the plate's tunnel section. This shortens the belt length, further enhancing stability.
Made in Japan for peace of mind.
4549550256230
ELECOM TV Anti-Tip Earthquake-Resistant Rubber Belt (2-Pack) Supports up to 75 inches, VESA Hole Compatible [Passed Earthquake Resistance Test Equivalent to Magnitude 7 / Made in Japan] TS-007 White
(text created at , 2025-05-09)
Package
Size (Approx.):
Size (Approx.):
97x32x175 mm
Package
Weight (Approx.):
Weight (Approx.):
160 g
6,259 JPY (Including Tax)
Stock :
5
Scheduled Shipping:
2026-03-16
Quantity :
Reference Price from Other Stores
