[ELECOM] Smartphone Strap Holder Smartphone Shoulder Strap 1-Slot Type 1 Piece Clear P-STHD1CR

4549550284424

B0BZYB15GX

P-STHD1CR

ELECOM - Strap Holder - Smartphone Shoulder Strap - Smartphone Strap - P-STHD1CR



■Set Contents: Strap Hole Sheet (Single-Hole Type) x 2


■Size: W65mm × D0.6mm × H53mm


■Material: PVC, Zinc Alloy


■Color: Clear


■Load Capacity: Up to approx. 2.5kg ※Do not use with devices weighing over 250g.


■This single-hole strap hole sheet adds a strap hole simply by inserting it between your smartphone and case.


■Even if your smartphone case lacks a strap hole, you can use it by threading it through the case's cable hole.


■Easy to remove and reattach, allowing repeated use even when changing cases.

■Transparent design won't interfere with your case or smartphone's back design.

■Allows connection of earphones or charging cables while attached. ※Maximum load capacity is approximately 2.5kg. Do not use with devices weighing over 250g.

■Thin sheet, approximately 0.5mm thick, designed to fit your case.

■Contains 2 sheets. ※The strap hole has a diameter of approximately 6mm. Please check the size of your strap's attachment part before purchasing.

■Can be used with your preferred straps, such as our smartphone shoulder straps or hand straps.

■For case types, please use hybrid cases or soft cases (cases with a hard back material are recommended). Do not use with silicone cases.

■Cases with the cable hole centered at the bottom are recommended. Use is not recommended with cases that have a large, open cable hole.

■Do not use with cases that have sharp edges or protrusions around the cable hole, as this can cause damage such as tearing of the strap sheet.

■ When removing your smartphone from a bag or pocket, avoid pulling or twisting the strap forcefully, as this can place excessive stress on the strap sheet and cause it to tear. Always remove the device straight out.

■ This product meets at least one of our in-house environmental certification standards and displays the ‘THINK ECOLOGY’ mark.

■ Committed to environmental conservation, this product's packaging consists solely of paper, cardboard, and polyethylene bags.
ELECOM General Information Center
TEL. 0570-084-465
FAX. 0570-050-012
Hours: 10:00 AM - 7:00 PM, Open Year-Round
Chat support is also available. For details, please visit 8056.jp.
Brand Name: ELECOM
Material: PVC, Zinc Alloy
This single-hole strap hole sheet adds a strap hole simply by inserting it between your smartphone and case.
Even if your smartphone case lacks a strap hole, you can use it by threading it through the case's cable hole.
Easy to attach and remove, allowing repeated use even when changing cases.
Transparent type that doesn't interfere with case design or smartphone back design.
Allows connection of earphones or charging cables even when attached.
4549550284424
[ELECOM] Smartphone Strap Holder Smartphone Shoulder Strap 1-Hole Type 1 Sheet Clear P-STHD1CR
(text created at , 2025-05-09)

79x7x180 mm

10 g