ELECOM Power Strip Tower Type Extension Cord [12 Outlets] with Fixed Parts, Surge Protector, Dust Shutters, 2m Black TT-03-1220BK

4549550285469

B0C9Q3NFKQ

TT-03-1220BK

ELECOM - Power Strip - with Mounting Parts - Dust Shutter - TT-03-1220BK Outlet Type: Type A, 2-pin Outlets: 12 Outlets Plug Type: Type A, 2-pin AC Cord Length: Approx. 2.0m Rating: 15A 125V Up to 1500W


■Polarity: ×


■Switch: ×


■Lightning guard: ○


■Dust shutter: ○


■Anti-pullout function: ×


■Socket cap: ×


■Power indicator lamp: ×


■Double construction: ○


■Double insulation: ○


■Plug with insulating cap: ○


■Swing plug: ○


■Magnet: ×


■Hanging hole: ○


■Breaker: ×


■Noise filter: ×


■Modular jack: ×


■Interlocking function: ×


■Conversion adapter: ×


■Color: Black


■Material: Main body: Polycarbonate resin, Socket: Urea resin, Plug: PVC resin


■External dimensions: Approx. 130mm wide x 130mm deep x 185mm high (Main body only, excluding protrusions)


■Weight: Approx. 681g


■Accessories: Instruction manual


■Usable area: Japan only


■Regulations: ▪️PSE Specified Electrical Appliances


■Warranty Period: 1 Year


■Other: Equipped with a tray for storing small items (Tray size: Maximum inner diameter = approx. 87 mm, bottom diameter = approx. 75 mm)



■This is a tower-type power strip with 12 outlets.


■Its tower design allows for a small footprint even with many outlets, and it can be connected from any direction, 360 degrees, making it convenient for use on conference room desks, etc.


■The tray-shaped top of the product allows for temporary storage of small items such as chargers when removed.


■The AC outlet is equipped with a dust prevention shutter to prevent dust from entering when not in use.


■The outlet has a double-layered structure made of heat-resistant thermosetting resin, which is resistant to melting even in the event of heat generation, effectively preventing electrical fires.


■The blade holder is 0.8 mm thick, resistant to deformation even with repeated use. It maintains plug retention and suppresses heat generation.

■The outlets are offset 45 degrees on each level, allowing even large AC adapters to be plugged in without interfering with each other.

■The lightning guard function protects connected devices from lightning surges caused by induced lightning up to 12,500V (based on the JEC210/212 standard).

■* Protects connected devices from direct lightning strikes or lightning surges exceeding the device's tolerance, even if the device is induced by lightning. Performance also deteriorates depending on the voltage and number of times it is exposed to lightning.

■By pulling out the legs stored on the bottom of the unit, you can ensure stability even if the weight balance is uneven due to connected adapters.

■The legs are equipped with anti-slip pads to prevent the unit from sliding sideways even when connected cords are pulled.

■The bottom has a daruma hole, allowing it to be attached to a screw installed in the wall or other surface.

■The power cord can be removed from the bottom or from the side using the groove on the bottom.

■The groove for removing the power cord from the side can be covered with the built-in part. The power cord is double-insulated and complies with the Japan Wiring System Industry Association standard (JWDS0010), effectively preventing electric shock and fire caused by broken or torn wires. It features a flexible, flat, parallel, two-core cord for easy handling. The 180-degree swing plug facilitates wiring even in tight spaces. The plug features a thermosetting resin between the prongs to prevent tracking, which can lead to fires, and an insulating sleeve to reduce the risk of electric shock. This product meets one or more of ELECOM's environmental certification standards and bears the "THINK ECOLOGY" mark. This product is committed to environmental conservation, reducing the plastic weight of its packaging by more than 20% compared to products that meet ELECOM's standards. Brand: ELECOM Material: Polycarbonate This tower-style power strip features 12 outlets that can be connected 360 degrees and require a relatively small installation space. The tray-shaped top of the product allows for temporary storage of small items such as a detached charger. This easy-to-use product features safety features such as a dual-layered power outlet and dust shutter, as well as convenient features such as a lightning guard and swing plug. Its tower design allows for a compact installation even with multiple outlets, and its 360-degree connection makes it convenient for use on conference room desks. The tray-shaped top of the product allows for temporary storage of small items such as a detached charger. The AC outlet is equipped with a dust shutter to prevent dust from entering when not in use. The outlets are made of a heat-resistant thermosetting resin with a double layered design, making them less likely to melt even in the event of overheating, effectively preventing electrical fires. 4549550285469 ELECOM Power Strip Tower Type Extension Cord [12 Outlets] with Fixing Parts, Lightning Guard, and Dust Shutter, 2m, Black, TT-03-1220BK (text created at , 2025-05-11)

139x137x201 mm

800 g