ELECOM Smartphone Stand Arm Clip Holder Smartphone Holder Compatible with 4.6-inch to 6.9-inch Devices Load Capacity 2kg iPhone Android PWDSARMFSBK
JAN
4549550287739
ASIN
B0CCRSCWP1
Maker
Model No.
PWDSARMFSBK
Color
Size
Description
ELECOM - Smartphone Stand - Pole Mountable - Fits 4-6" to 6-9" Smartphones - PWDSARMFSBK Material: ABS, Silicone, TPR (Thermoplastic Elastomer) Dimensions: Smartphone Holder: Approx. 115mm W x 30mm D x 145mm H, Arm: Approx. 180mm, Base Holder: Approx. 81mm W x 43mm D x 32mm H Weight: Approx. 95g Color: Black Compatible Models: 4.6-6.9 inch Smartphones (Approx. 67.3mm W x 7.3mm D x 138.4mm H) (Up to approximately 79mm wide x 15mm deep x 161mm high)
■Compatible Size: Clamp-compatible board thickness: approximately 10mm to 40mm, clamp-compatible cylinder diameter: approximately 10mm to 30mm, device holder thickness: approximately 7mm to 15mm
■Weight Capacity: approximately 2kg
■Angle Adjustment: Yes
■This clamp-type smartphone stand allows you to enjoy browsing websites and watching videos without holding your smartphone, even when you're on the go.
■The clamp is designed to fit horizontal surfaces such as desks, as well as cylindrical poles. It can also be attached to stroller handles and car headrest supports.
■Two hinges secure the arm angle, preventing it from shifting even in vibration-prone environments. It is also suitable for use on seat tables on bullet trains and airplanes.
■Lightweight at approximately 95g, it folds compactly for easy portability.
■The holder has a non-slip surface to prevent your smartphone from slipping.
■A ball joint connects the arm and holder, allowing you to adjust the angle and direction to your liking.
■The arm angle can be adjusted in five positions, and the height (from the clamp to the ball joint) can be adjusted from 30 to 130 mm.
■A non-slip surface inside the clamp allows for a secure grip on tabletops and poles.
■Compatible with smartphones from 4.6 to 6.9 inches.
■This product is designed to position the device at an appropriate viewing angle. Do not use for any other purpose.
■This product is not intended to secure the device. Do not use in unstable locations.
■There is a risk of the device falling. Do not use with devices other than those supported.
■Please make sure the device is securely attached to this product before use.
■Do not press too hard when performing touch operations with the device attached.
■The arm angle may not be maintained for long periods of time if the device exceeds the total weight capacity or if a case is attached.
■Never disassemble or modify this product.
■※ Avoid using and storing this product in high temperatures, high humidity, or direct sunlight, as these may cause deformation or deterioration of the product and the device itself. Also, wipe off any moisture that gets on the product.
■※ Please note that we are not responsible for any damage or malfunction to the device itself, or for any loss or deletion of data.
■※ If you notice any cracks or other damage, deformation, or deterioration, discontinue use immediately.
■※ Do not expose this product to alcohol or other chemicals.
■※ Do not wipe the product with a hard cloth.
■※ Keep out of reach of infants and young children.
■※ Due to the characteristics of the material, this product may discolor over time.
■ This product meets one or more of our company's environmental certification standards and bears the "THINK ECOLOGY" mark.
■ This product is committed to environmental conservation, and uses more than 20% less plastic in its packaging than our company's standard. ELECOM General Information Center TEL: 0570-084-465 FAX: 0570-050-012 Business Hours: 10:00 AM - 7:00 PM, Open Every Day Brand Name: ELECOM Material: Silicone This clamp-type smartphone stand allows you to browse websites and videos without holding your smartphone, even when you're on the go. The clamp is designed to fit horizontal surfaces like desks, as well as cylindrical poles. It can also be attached to stroller handles and car headrests. Two hinges secure the arm angle, preventing it from shifting even in vibration-prone environments. It's also suitable for use on seat tables on bullet trains and airplanes. It weighs approximately 95g and folds compactly for easy portability. The holder has a non-slip surface to prevent your smartphone from slipping. The connection between the arm and holder features a ball joint.
■Compatible Size: Clamp-compatible board thickness: approximately 10mm to 40mm, clamp-compatible cylinder diameter: approximately 10mm to 30mm, device holder thickness: approximately 7mm to 15mm
■Weight Capacity: approximately 2kg
■Angle Adjustment: Yes
■This clamp-type smartphone stand allows you to enjoy browsing websites and watching videos without holding your smartphone, even when you're on the go.
■The clamp is designed to fit horizontal surfaces such as desks, as well as cylindrical poles. It can also be attached to stroller handles and car headrest supports.
■Two hinges secure the arm angle, preventing it from shifting even in vibration-prone environments. It is also suitable for use on seat tables on bullet trains and airplanes.
■Lightweight at approximately 95g, it folds compactly for easy portability.
■The holder has a non-slip surface to prevent your smartphone from slipping.
■A ball joint connects the arm and holder, allowing you to adjust the angle and direction to your liking.
■The arm angle can be adjusted in five positions, and the height (from the clamp to the ball joint) can be adjusted from 30 to 130 mm.
■A non-slip surface inside the clamp allows for a secure grip on tabletops and poles.
■Compatible with smartphones from 4.6 to 6.9 inches.
■This product is designed to position the device at an appropriate viewing angle. Do not use for any other purpose.
■This product is not intended to secure the device. Do not use in unstable locations.
■There is a risk of the device falling. Do not use with devices other than those supported.
■Please make sure the device is securely attached to this product before use.
■Do not press too hard when performing touch operations with the device attached.
■The arm angle may not be maintained for long periods of time if the device exceeds the total weight capacity or if a case is attached.
■Never disassemble or modify this product.
■※ Avoid using and storing this product in high temperatures, high humidity, or direct sunlight, as these may cause deformation or deterioration of the product and the device itself. Also, wipe off any moisture that gets on the product.
■※ Please note that we are not responsible for any damage or malfunction to the device itself, or for any loss or deletion of data.
■※ If you notice any cracks or other damage, deformation, or deterioration, discontinue use immediately.
■※ Do not expose this product to alcohol or other chemicals.
■※ Do not wipe the product with a hard cloth.
■※ Keep out of reach of infants and young children.
■※ Due to the characteristics of the material, this product may discolor over time.
■ This product meets one or more of our company's environmental certification standards and bears the "THINK ECOLOGY" mark.
■ This product is committed to environmental conservation, and uses more than 20% less plastic in its packaging than our company's standard. ELECOM General Information Center TEL: 0570-084-465 FAX: 0570-050-012 Business Hours: 10:00 AM - 7:00 PM, Open Every Day Brand Name: ELECOM Material: Silicone This clamp-type smartphone stand allows you to browse websites and videos without holding your smartphone, even when you're on the go. The clamp is designed to fit horizontal surfaces like desks, as well as cylindrical poles. It can also be attached to stroller handles and car headrests. Two hinges secure the arm angle, preventing it from shifting even in vibration-prone environments. It's also suitable for use on seat tables on bullet trains and airplanes. It weighs approximately 95g and folds compactly for easy portability. The holder has a non-slip surface to prevent your smartphone from slipping. The connection between the arm and holder features a ball joint.
Package
Size (Approx.):
Size (Approx.):
102x47x146 mm
Package
Weight (Approx.):
Weight (Approx.):
240 g
1,734 JPY (Including Tax)
Stock :
5
Scheduled Shipping:
2026-05-27
Quantity :
Reference Price from Other Stores
