ELECOM Gigabit Switching Hub 5-Port Metal Housing with Magnet Built-in Power Supply Model Black EHC-G05MN4-HJB

4549550318334

B0DJ8PX9SR

EHC-G05MN4-HJB

ELECOM - Gigabit Switching Hub - 5 Ports - Built-in Power Supply Model - EHC-G05MN4-HJB


■Transmission Speed: 1000Mbps (1000BASE-T), 100Mbps (100BASE-TX), 10Mbps (10BASE-T)


■Compliant Standards: IEEE 802.3ab, IEEE 802.3u, IEEE 802.3


■Switching Method: Store-and-Forward


■Communication Method: Full-Duplex, Half-Duplex


■Flow Control: IEEE 802.3x (Full-Duplex), Backpressure (Half-Duplex)


■Number of Ports: 5


■Auto MDI/MDI-X: Supported


■Auto-negotiation: Supported


■Connector type: RJ-45 x 5


■Compatible cables: 1000BASE-T: UTP Category 5e or higher, 100BASE-TX: UTP Category 5 or higher, 10BASE-T: UTP Category 3 or higher


■Buffer memory: 128Kbytes (dynamically allocated to each port)


■Switching fabric: 10.0Gbps


■Maximum packet forwarding capacity: 7.4Mpps


■Packet forwarding speed: 1,488 , 095 packets/second (1000Mbps), 148,809 packets/second (100Mbps), 14,880 packets/second (10Mbps)


■Number of MAC addresses registered: 2,048 (total for all ports)


■Jumbo frames: Supported (9Kbytes)


■Non-blocking: Supported


■EAP transparency: Supported


■BPDU transparency: Supported


■Loop detection and prevention: Loop detection


■PoE specifications: Not supported


■Power specifications: Built-in power supply


■Input voltage: AC 100-240V ±10% 50/60Hz


■Power consumption: 3.0W (max)


■Heat output: Approximately 10.8kJ/h (max)


■Power saving features: Easy energy saving E compatible (IEEE 802.3az)


■Energy consumption efficiency: 0.6W/Gbps


■Maximum effective transmission speed: 5.0Gbps


■Port speed and number of ports at the time of measurement: 1Gbps: 5 ports


■External dimensions: Approx. 121.0mm wide x 63.0mm deep x 28.0mm high (main unit only)


■Weight: Approx. 250g (main unit only)


■Housing material (color): Metal (black)


■Easy Energy Saving E function saves up to approximately 86% of power. [Measurement method]: Data is transferred from the load machine to this product. The power consumption is compared after one minute when all ports are communicating and when not communicating.


■In addition to using a metal case with excellent heat dissipation, it has an operating temperature of 50°C, so it can be used without worry even in environments prone to high temperatures.


■It can be installed on a metal surface using the magnet on the back of the unit. It can also be installed horizontally or on a wall using the wall-mounting hole on the back of the unit. It can be flexibly adjusted to suit your environment.

79x69x185 mm

420 g