GodHand Spin Blade 0.5mm–0.9mm GH-SB-05-09 Hobby Tool
JAN
4562349870820
ASIN
B0CWRX165P
Manufacturer
Model Number
GH-SB-05-09
Color
Size
Description
GodHand Spin Blade 0-5mm to 0-9mm GH-SB-05-09
Product Introduction
A thin-bladed carving tool under 1mm wide for use with pin vises
Ideal for detailing figures and mini-mechanics
Ultra-fine sizes now available for Spin Blades.
Ultra-fine size under 1mm blade width for easily flattening the bottom of round holes.
Rotate it for sharp, precise carving on small round molds.
Also exceptionally handy as a thin-bladed carving tool. Attach to the pin vise body to flatten drill hole bottoms or use as a small carving tool. Set of 5 sizes: 0.5mm to 0.9mm. All shafts are standardized at 3mm, eliminating the need to change the pin vise's collet chuck for easy swapping. Works perfectly with the 5-piece drill bit set A.
※As these are cutting tools, exercise caution when opening the lid and during use.
▼Usage Method
① Attach the drill bit to the pin vise and drill a hole.
② Attach a spin blade of the same diameter as the drilled hole to the pin vise.
③ Use the spin blade to chamfer the bottom surface of the carved hole.
Flattens the bottom surface of holes drilled with the same diameter drill bit (drill bit machining)
Uniform 3mm shaft size
Blade sizes: 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm
Can also be used as a thin-bladed carving tool
Quality Specifications
・Material: Special tool steel (with case)
・Hole diameter: 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm
・Case: PP・Shaft thickness: 3mm・Country of manufacture: Japan
⚠ Precautions
・Securely clamp in a pin vise before use
・Ensure no one is nearby and wear safety goggles for protection.
Cutting debris or broken blades entering the eye may cause blindness
・Though made from high-hardness metal, excessive force or twisting may damage the tip, causing unexpected injury\ ・After use, wipe with a dry cloth, apply oil, and store in the case
・As this is a cutting tool, exercise extreme caution to avoid injury
・Do not exceed its rated capacity
・When using for rotation, always pre-drill a guide hole with a drill bit of the same diameter before use.
Brand Name: GodHand
Unisex
Main Unit
Material: Metal
Ultra-Fine Spin Blade
Material: Special Tool Steel
Main Country of Manufacture: Japan
Shaft Diameter: 3mm
4562349870820
GodHand Spin Blade 0.5mm–0.9mm GH-SB-05-09 Hobby Tool
(text created at , 2025-05-11)
Product Introduction
A thin-bladed carving tool under 1mm wide for use with pin vises
Ideal for detailing figures and mini-mechanics
Ultra-fine sizes now available for Spin Blades.
Ultra-fine size under 1mm blade width for easily flattening the bottom of round holes.
Rotate it for sharp, precise carving on small round molds.
Also exceptionally handy as a thin-bladed carving tool. Attach to the pin vise body to flatten drill hole bottoms or use as a small carving tool. Set of 5 sizes: 0.5mm to 0.9mm. All shafts are standardized at 3mm, eliminating the need to change the pin vise's collet chuck for easy swapping. Works perfectly with the 5-piece drill bit set A.
※As these are cutting tools, exercise caution when opening the lid and during use.
▼Usage Method
① Attach the drill bit to the pin vise and drill a hole.
② Attach a spin blade of the same diameter as the drilled hole to the pin vise.
③ Use the spin blade to chamfer the bottom surface of the carved hole.
Flattens the bottom surface of holes drilled with the same diameter drill bit (drill bit machining)
Uniform 3mm shaft size
Blade sizes: 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm
Can also be used as a thin-bladed carving tool
Quality Specifications
・Material: Special tool steel (with case)
・Hole diameter: 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm
・Case: PP・Shaft thickness: 3mm・Country of manufacture: Japan
⚠ Precautions
・Securely clamp in a pin vise before use
・Ensure no one is nearby and wear safety goggles for protection.
Cutting debris or broken blades entering the eye may cause blindness
・Though made from high-hardness metal, excessive force or twisting may damage the tip, causing unexpected injury\ ・After use, wipe with a dry cloth, apply oil, and store in the case
・As this is a cutting tool, exercise extreme caution to avoid injury
・Do not exceed its rated capacity
・When using for rotation, always pre-drill a guide hole with a drill bit of the same diameter before use.
Brand Name: GodHand
Unisex
Main Unit
Material: Metal
Ultra-Fine Spin Blade
Material: Special Tool Steel
Main Country of Manufacture: Japan
Shaft Diameter: 3mm
4562349870820
GodHand Spin Blade 0.5mm–0.9mm GH-SB-05-09 Hobby Tool
(text created at , 2025-05-11)
Package
Size (Approx.):
Size (Approx.):
74x12x140 mm
Package
Weight (Approx.):
Weight (Approx.):
30 g
4,812 Yen (Including Tax)
Stock :
5
Scheduled Shipping:
2025-11-25
Quantity :
Reference Price from Other Stores
