GodHand Kami Yasu! Polishing Cutting Type 2mm Thickness B Set #8000#10000 (1 each) Sponge Cloth File GH-KSC2-KBB
JAN
4562349878048
ASIN
B09QHNRDWM
Maker
Model No.
GH-KSC2-KBB
Color
Size
Description
GodHand Cutting Type Sponge Cloth File GH-KSC2-KBB
Product Introduction
Product Introduction Cut it into any shape and stick it on. The “Cutting Type” is now available for GodHand. Repurpose various items as backing plates, and with a little creativity, you can create your own custom sanding pad tailored to the shape of whatever you want to sand. Cut, stick, and use GodHand. Cutting Type Create GodHand. with backing plates using all sorts of items. It's GodHand. that you can cut and stick on immediately. Its strong adhesion means not only dedicated backing boards like FF boards, but also various everyday items can easily become your backing board. Using a backing board shaped to your target surface—from flat planes to curved surfaces—makes shaping easier. Benefits of using KAMINASU. Cutting Type on a backing board: Attaching KAMINASU. to a backing board creates a cushioned, “non-bending” file. This allows you to apply the file uniformly across the entire surface, even on slightly undulating planes. ▽Difference from Edge-Raising Files Edge-raising files are excellent for precisely defining surfaces or standing edges upright. However, their zero cushioning makes it difficult to smoothly connect surfaces with subtle undulations. By attaching KamiYasu. Cutting Type to a backing plate, you can smooth surfaces while retaining slight curves. Connecting consistent planes and edges creates a precise appearance where “edges seem to stand out.” ▽Difference from KamiYasu. 10mm Thickness While KamiYasu. 10mm thickness is more convenient for subtle, detailed areas, for “flattening surfaces,” the KamiYasu. Cutting Type attached to a backing board is easier to use. It also makes it easier to flatten surfaces near edges without distorting the edge itself. ・Prolonged immersion in water or exposure to solvents like lacquer may cause the adhesive to dissolve and peel. ・Store safely out of reach of small children. ・Wear safety goggles and a dust mask during use. ・Scratches or dirt on the file surface do not affect performance. ・If adhesive residue remains after removal, use a sticker remover or IPA (isopropyl alcohol) to clean it off thoroughly. ・ Applying to fragile items or forcing application may cause injury or poor adhesion. Exercise caution with the surface. ・Adhesion may fail on certain surfaces. Test with tape first before use. Safety Warning Always read the instruction manual before use. Safety Warning Always read the instruction manual before use.
Brand Name: GodHand
Main Unit, Grit Label
Material: Foam
Introducing the “Cutting Type” for KamiYasu. Cut it into any shape and apply it instantly.
Features a strong adhesive backing, allowing you to use various items as backing boards.
Not only for FF boards (backing boards), but also usable with power tools like pen sanders.
A highly durable sponge cloth sandpaper combining moderate flexibility and elasticity.
Country of Manufacture: Japan
4562349878048
GodHand KamiYasu. Grinding Cutting Type 2mm Thickness B Set #8000#10000 (1 each) Sponge Cloth Sandpaper GH-KSC2-KBB
(text created at , 2025-05-12)
Product Introduction
Product Introduction Cut it into any shape and stick it on. The “Cutting Type” is now available for GodHand. Repurpose various items as backing plates, and with a little creativity, you can create your own custom sanding pad tailored to the shape of whatever you want to sand. Cut, stick, and use GodHand. Cutting Type Create GodHand. with backing plates using all sorts of items. It's GodHand. that you can cut and stick on immediately. Its strong adhesion means not only dedicated backing boards like FF boards, but also various everyday items can easily become your backing board. Using a backing board shaped to your target surface—from flat planes to curved surfaces—makes shaping easier. Benefits of using KAMINASU. Cutting Type on a backing board: Attaching KAMINASU. to a backing board creates a cushioned, “non-bending” file. This allows you to apply the file uniformly across the entire surface, even on slightly undulating planes. ▽Difference from Edge-Raising Files Edge-raising files are excellent for precisely defining surfaces or standing edges upright. However, their zero cushioning makes it difficult to smoothly connect surfaces with subtle undulations. By attaching KamiYasu. Cutting Type to a backing plate, you can smooth surfaces while retaining slight curves. Connecting consistent planes and edges creates a precise appearance where “edges seem to stand out.” ▽Difference from KamiYasu. 10mm Thickness While KamiYasu. 10mm thickness is more convenient for subtle, detailed areas, for “flattening surfaces,” the KamiYasu. Cutting Type attached to a backing board is easier to use. It also makes it easier to flatten surfaces near edges without distorting the edge itself.
Brand Name: GodHand
Main Unit, Grit Label
Material: Foam
Introducing the “Cutting Type” for KamiYasu. Cut it into any shape and apply it instantly.
Features a strong adhesive backing, allowing you to use various items as backing boards.
Not only for FF boards (backing boards), but also usable with power tools like pen sanders.
A highly durable sponge cloth sandpaper combining moderate flexibility and elasticity.
Country of Manufacture: Japan
4562349878048
GodHand KamiYasu. Grinding Cutting Type 2mm Thickness B Set #8000#10000 (1 each) Sponge Cloth Sandpaper GH-KSC2-KBB
(text created at , 2025-05-12)
Package
Size (Approx.):
Size (Approx.):
119x7x198 mm
Package
Weight (Approx.):
Weight (Approx.):
30 g
1,348 JPY (Including Tax)
Stock :
88
Scheduled Shipping:
2026-03-30
Quantity :
Reference Price from Other Stores
