Plamokojo My Panel Line Pen (MY PANEL LINE PEN) 3-Pack Hobby Tool PMKJ028
JAN
4580474577865
ASIN
B0DHKGSHQ3
Maker
Model No.
Color
Size
Description
Plamo Improvement Committee - plamokojo - My Inking Pen - Hobby Tools - PMKJ028 Plamo Improvement Committee plamokojo My Inking Pen Hobby Tools PMKJ028
Inking is an essential process for giving plastic models a three-dimensional finish.
However, finding an inking pen with the perfect color to match the color of your plastic model can be a challenge.
The "My Inking Pen" is an innovative pour-type inking pen that allows you to fill the pen with your custom-mixed paint to match your plastic model kit, achieving professional-quality inking with the feel of a paint brush and the ease of a marker pen.
The pen is made of a material that is resistant to enamel solvents, allowing you to create an enamel paint inking pen that is easy to wipe off and redo.
It can also be used with pour-in adhesive. Set Contents: My Inking Pen x 3; Dedicated Measuring Cup x 1; Pen Size: Approx. H160 x W15mm (Built-in Stirring Ball Φ5.5mm); Measuring Cup Size: Approx. H26 x W23mm; Instructions for Use: 1. Add paint according to the bottom line on the cup. 2. Add thinner according to the top line on the cup and mix. 3. Open the inlet lid and pour in the paint. 4. Tighten the lid tightly. *Concentration varies depending on the type of paint, so please adjust the amount of paint and thinner before use. 5. Turn the open/close knob vertically. Hold this position until the paint is completely absorbed into the brush tip. 6. Tilt the open/close knob (adjust the angle depending on the amount of paint dispensed). Then, place the brush tip on the area you want to inscribe and pour in the paint.
・Make your own inking pen with your favorite colors
The "My Inking Pen" is a pen that allows you to inking in the colors you want to achieve your desired finish.
To use, first dilute the paint and solvent (ink) (5x) according to the measuring cup's scale, then pour it into the back of the pen.
Turn the knob on the side of the pen until the tip is completely saturated with the ink color. Once you've set the color, you can inking approximately 2-3 plastic model kits.
This product comes in a pack of 3, allowing for versatile use with multiple colors.
Note: Ink flow may vary depending on the color used and the temperature. Based on the dilution level in the measuring cup, add solvent as needed to adjust the concentration to a flowable consistency.
Note: Paint may leak from the inlet cap at the back of the pen. Please tighten the cap securely before use.
・Professional inking using capillary action
By holding the tip of the pen against the mold of the plastic model you want to inking, the ink will flow and the inking will begin. The ink flows naturally into the panel line grooves through capillary action, just like when using a paint brush for inking, resulting in a perfect finish. The ultra-fine tip allows for easy application to tight and narrow areas. The flow rate varies depending on the type of ink and its dilution, so adjust the knob at an angle. The material is resistant to water-based and lacquer-based solvents, as well as enamel solvents, making it easy to wipe off and redo. While you can refill a used color, you cannot use different colors in the same pen. - Built-in stirring ball for paint agitation. Because components can separate after a certain period of storage, the pen comes standard with a metal stirring ball. Shaking the pen up and down ensures the paint is evenly mixed before returning it to the original state. For areas you forgot to ink or for a second inking, simply shake the pen to stir and open the knob for immediate use. When the ink runs out, you can refill it with the same color ink and reuse it. *If the pen is stored for an extended period of time, the paint may harden to the body and become difficult to stir. Please use it as regularly as possible. *When shaking the pen, make sure the knob and lid are closed before doing so. Otherwise, paint may splatter from the tip. *Easy Storage and Cleanup* Turning the knob on the side stops the ink from leaking, allowing for storage while preventing ink evaporation. *The brush tip is made of a highly resilient material, so even if paint hardens, it is less likely to crack or become fuzzy. It can be easily restored to its original shape by dissolving it in a parts cleaning solvent. *If the pen tip hardens after extended storage, it must be dissolved in a solvent before use. *When storing, store the pen upright with the tip facing downwards. Residual paint may drip from the tip and stain the handle. *Wipe any remaining paint from the tip thoroughly before tightening the cap. *Compatible with pour-in adhesives* This product can also be used as a pour-in adhesive pen. By transferring the remaining pour-in adhesive to the My Inking Pen with a dropper, you can use every last drop, making gluing work more efficient. Note: Because pour-in adhesive has very low fluidity, it may flow out of the pen tip forcefully. Tighten the knob on the side to reduce flow rate. This product is a hobby tool. Other items (adhesive, paint, batteries, etc.) are not included. Brand: Plamo Improvement Committee (Puramokoujouiinkai). Measuring Cup Material: Polypropylene (PP). This innovative pour-in ink pen allows you to fill the pen with your desired color mixture, achieving professional-quality inking with the feel of a paint brush and the ease of a marker pen. The built-in stirring ball utilizes capillary action to help mix the paint for professional inking. Easy storage and cleanup. Compatible with pour-in adhesive. Note: Because pour-in adhesive has very low viscosity, it may flow out of the pen tip forcefully. Tighten the knob on the side to reduce flow rate. 4580474577865 Plamo Improvement Committee plamokojo My Panel Line Pen (3-Pack) Hobby Tool PMKJ028 (text created at , 2025-05-13)
Inking is an essential process for giving plastic models a three-dimensional finish.
However, finding an inking pen with the perfect color to match the color of your plastic model can be a challenge.
The "My Inking Pen" is an innovative pour-type inking pen that allows you to fill the pen with your custom-mixed paint to match your plastic model kit, achieving professional-quality inking with the feel of a paint brush and the ease of a marker pen.
The pen is made of a material that is resistant to enamel solvents, allowing you to create an enamel paint inking pen that is easy to wipe off and redo.
It can also be used with pour-in adhesive. Set Contents: My Inking Pen x 3; Dedicated Measuring Cup x 1; Pen Size: Approx. H160 x W15mm (Built-in Stirring Ball Φ5.5mm); Measuring Cup Size: Approx. H26 x W23mm; Instructions for Use: 1. Add paint according to the bottom line on the cup. 2. Add thinner according to the top line on the cup and mix. 3. Open the inlet lid and pour in the paint. 4. Tighten the lid tightly. *Concentration varies depending on the type of paint, so please adjust the amount of paint and thinner before use. 5. Turn the open/close knob vertically. Hold this position until the paint is completely absorbed into the brush tip. 6. Tilt the open/close knob (adjust the angle depending on the amount of paint dispensed). Then, place the brush tip on the area you want to inscribe and pour in the paint.
・Make your own inking pen with your favorite colors
The "My Inking Pen" is a pen that allows you to inking in the colors you want to achieve your desired finish.
To use, first dilute the paint and solvent (ink) (5x) according to the measuring cup's scale, then pour it into the back of the pen.
Turn the knob on the side of the pen until the tip is completely saturated with the ink color. Once you've set the color, you can inking approximately 2-3 plastic model kits.
This product comes in a pack of 3, allowing for versatile use with multiple colors.
Note: Ink flow may vary depending on the color used and the temperature. Based on the dilution level in the measuring cup, add solvent as needed to adjust the concentration to a flowable consistency.
Note: Paint may leak from the inlet cap at the back of the pen. Please tighten the cap securely before use.
・Professional inking using capillary action
By holding the tip of the pen against the mold of the plastic model you want to inking, the ink will flow and the inking will begin. The ink flows naturally into the panel line grooves through capillary action, just like when using a paint brush for inking, resulting in a perfect finish. The ultra-fine tip allows for easy application to tight and narrow areas. The flow rate varies depending on the type of ink and its dilution, so adjust the knob at an angle. The material is resistant to water-based and lacquer-based solvents, as well as enamel solvents, making it easy to wipe off and redo. While you can refill a used color, you cannot use different colors in the same pen. - Built-in stirring ball for paint agitation. Because components can separate after a certain period of storage, the pen comes standard with a metal stirring ball. Shaking the pen up and down ensures the paint is evenly mixed before returning it to the original state. For areas you forgot to ink or for a second inking, simply shake the pen to stir and open the knob for immediate use. When the ink runs out, you can refill it with the same color ink and reuse it. *If the pen is stored for an extended period of time, the paint may harden to the body and become difficult to stir. Please use it as regularly as possible. *When shaking the pen, make sure the knob and lid are closed before doing so. Otherwise, paint may splatter from the tip. *Easy Storage and Cleanup* Turning the knob on the side stops the ink from leaking, allowing for storage while preventing ink evaporation. *The brush tip is made of a highly resilient material, so even if paint hardens, it is less likely to crack or become fuzzy. It can be easily restored to its original shape by dissolving it in a parts cleaning solvent. *If the pen tip hardens after extended storage, it must be dissolved in a solvent before use. *When storing, store the pen upright with the tip facing downwards. Residual paint may drip from the tip and stain the handle. *Wipe any remaining paint from the tip thoroughly before tightening the cap. *Compatible with pour-in adhesives* This product can also be used as a pour-in adhesive pen. By transferring the remaining pour-in adhesive to the My Inking Pen with a dropper, you can use every last drop, making gluing work more efficient. Note: Because pour-in adhesive has very low fluidity, it may flow out of the pen tip forcefully. Tighten the knob on the side to reduce flow rate. This product is a hobby tool. Other items (adhesive, paint, batteries, etc.) are not included. Brand: Plamo Improvement Committee (Puramokoujouiinkai). Measuring Cup Material: Polypropylene (PP). This innovative pour-in ink pen allows you to fill the pen with your desired color mixture, achieving professional-quality inking with the feel of a paint brush and the ease of a marker pen. The built-in stirring ball utilizes capillary action to help mix the paint for professional inking. Easy storage and cleanup. Compatible with pour-in adhesive. Note: Because pour-in adhesive has very low viscosity, it may flow out of the pen tip forcefully. Tighten the knob on the side to reduce flow rate. 4580474577865 Plamo Improvement Committee plamokojo My Panel Line Pen (3-Pack) Hobby Tool PMKJ028 (text created at , 2025-05-13)
Package
Size (Approx.):
Size (Approx.):
93x24x207 mm
Package
Weight (Approx.):
Weight (Approx.):
40 g
1,444 JPY (Including Tax)
Stock :
19
Scheduled Shipping:
2026-02-09
Quantity :
Reference Price from Other Stores
