Konishi Bond Aron Alpha Dedicated Accelerator 100ml 05779
JAN
4901490057795
ASIN
B08M3S7D38
Maker
Model No.
05779
Color
Size
Description
Konishi - Aron Alpha - Dedicated Accelerator - Accelerator - 100ml
Further accelerates the curing speed of Aron Alpha. Prevents whitening for a clean finish. Can be used both before and after bonding with Aron Alpha. Low-odor type for easy handling. Diorama, plastic model, and figure creation. Handmade accessories, remakes, and repairs. Cosplay prop creation. Repairs for acrylic stands and similar items.
Reduces bonding time in craft workshops.
Spray onto the opposite surface of the Aron Alpha application from about 10 cm away.
When using after bonding, spray onto the Aron Alpha application area from about 10 cm away.
Excessive application may cause discoloration of the substrate or bonding failure, so use with caution.
Before use, check for effects on the substrate and surrounding areas.
After spraying, Aron Alpha hardens rapidly.
Inhalation may cause poisoning or other health hazards; strictly follow the precautions below.
Do not use for purposes other than those specified.
This is a volatile solvent; inhaling vapors may cause poisoning.
Do not use near heat, sparks, open flames, or ignition sources that may cause high temperatures. Do not tilt or invert the can during use. Do not puncture the can carelessly. Wash hands thoroughly and rinse mouth after use. Use only outdoors or in well-ventilated areas. Always read the first aid instructions and handling precautions for the specific Aron Alpha product used. First Aid If swallowed: Do not induce vomiting. Seek immediate medical attention. If on skin: Wash with plenty of water and soap. If inhaled: Move to fresh air. Rest in a comfortable position. Seek medical attention if symptoms persist. If in eyes: Rinse immediately with plenty of clean water. Seek medical attention if irritation persists. Storage and Disposal Methods
Avoid storing near fire or direct sunlight. Do not store in locations exceeding 40°C (104°F).
Keep out of reach of children.
To prevent can rusting, do not store near water sources or in humid locations.
When disposing, use up all contents. Then, refer to the diagram on the right. In an outdoor area away from fire, use the gas release cap until the spraying sound stops to release all gas.
Dispose of empty containers according to local regulations.
Brand Name: Konishi
Curing Accelerator
Anti-Whitening
Filling Adhesion
Raised Adhesion
4901490057795
Konishi Bond Aron Alpha Dedicated Accelerator 100ml 05779
(text created at , 2025-05-12)
Further accelerates the curing speed of Aron Alpha. Prevents whitening for a clean finish. Can be used both before and after bonding with Aron Alpha. Low-odor type for easy handling. Diorama, plastic model, and figure creation. Handmade accessories, remakes, and repairs. Cosplay prop creation. Repairs for acrylic stands and similar items.
Reduces bonding time in craft workshops.
Spray onto the opposite surface of the Aron Alpha application from about 10 cm away.
When using after bonding, spray onto the Aron Alpha application area from about 10 cm away.
Excessive application may cause discoloration of the substrate or bonding failure, so use with caution.
Before use, check for effects on the substrate and surrounding areas.
After spraying, Aron Alpha hardens rapidly.
Inhalation may cause poisoning or other health hazards; strictly follow the precautions below.
Do not use for purposes other than those specified.
This is a volatile solvent; inhaling vapors may cause poisoning.
Do not use near heat, sparks, open flames, or ignition sources that may cause high temperatures. Do not tilt or invert the can during use. Do not puncture the can carelessly. Wash hands thoroughly and rinse mouth after use. Use only outdoors or in well-ventilated areas. Always read the first aid instructions and handling precautions for the specific Aron Alpha product used. First Aid If swallowed: Do not induce vomiting. Seek immediate medical attention. If on skin: Wash with plenty of water and soap. If inhaled: Move to fresh air. Rest in a comfortable position. Seek medical attention if symptoms persist. If in eyes: Rinse immediately with plenty of clean water. Seek medical attention if irritation persists. Storage and Disposal Methods
Avoid storing near fire or direct sunlight. Do not store in locations exceeding 40°C (104°F).
Keep out of reach of children.
To prevent can rusting, do not store near water sources or in humid locations.
When disposing, use up all contents. Then, refer to the diagram on the right. In an outdoor area away from fire, use the gas release cap until the spraying sound stops to release all gas.
Dispose of empty containers according to local regulations.
Brand Name: Konishi
Curing Accelerator
Anti-Whitening
Filling Adhesion
Raised Adhesion
4901490057795
Konishi Bond Aron Alpha Dedicated Accelerator 100ml 05779
(text created at , 2025-05-12)
Package
Size (Approx.):
Size (Approx.):
48x47x144 mm
Package
Weight (Approx.):
Weight (Approx.):
130 g
1,361 JPY (Including Tax)
Stock :
20
Scheduled Shipping:
2026-07-09
Quantity :
Reference Price from Other Stores
