Daiji Kogyo/Meltec Booster Cable 80A 3.0M DC12V Hybrid Vehicle Compatible Kei Cars to Minivans, Wagons Battery BT-21
JAN
4906918810105
ASIN
B09FPMCBRX
Maker
Model No.
BT-21
Color
Size
Description
Meltec - Booster Cable - Compatible with HV Vehicles - For Standard Cars - DC12V・80A - BT-21
Product Introduction\
\
Product Introduction
▪️Peace of mind for sudden battery failures. Anyone can use it safely and securely. Simply connect in the order of the numbers on the booster clip tags. Includes safe insulated covers. Safety Warning *To ensure safe and correct use of this product, please read the instruction manual thoroughly and do not proceed until you fully understand it. *Use booster cables suitable for your vehicle. Using booster cables with insufficient capacity may prevent the engine from starting or cause the cables, clips, or clip covers to overheat, smoke, or melt. ※Select a rescue vehicle with the same or higher battery capacity. ※When starting with booster cables, connect them in the correct order. ※If the engine fails to start using booster cables, recharge the battery. Recharging makes the engine easier to start. ※During connection, avoid incorrect connections (not as per the manual) or short circuits (contact between the red and black clips). Cables, clips, clip covers, etc., may overheat, smoke, or melt. They may also ignite from flammable gases emitted by the battery, causing an explosion. This is dangerous. ※Do not use near open flames or flammable materials during operation. The battery may explode, which is dangerous. ※100A/120A booster cables may not be usable with hybrid vehicles depending on the size of the booster clips. ※Boosting the drive battery of a hybrid vehicle is not permitted.\
Safety Warning\
※To ensure safe and proper use of this product, read the instruction manual thoroughly and do not proceed until you fully understand it. ※Use booster cables suitable for your vehicle. Using booster cables with insufficient capacity may prevent the engine from starting or cause the cables, clips, or clip covers to overheat, smoke, or melt. ※Select a rescue vehicle with a battery capacity equal to or greater than the vehicle's battery. ※When starting with booster cables, connect them in the correct order. ※If the engine fails to start after using booster cables, recharge the battery. Recharging makes the engine easier to start. ※ During connection, avoid incorrect connections (not specified in the manual) or short circuits (contact between red and black clips). This can cause cables, clips, or clip covers to overheat, smoke, or melt, and may ignite flammable gases from the battery, leading to explosion. ※ Do not use near open flames or flammable materials during operation. This poses a risk of battery explosion. ※100A/120A booster cables may not be compatible with hybrid vehicles due to booster clip size limitations. ※Cannot be used to boost the drive battery of hybrid vehicles. Brand Name: Meltec Booster Cable Unit Peace of mind for sudden battery failures. [Approximate Compatible Vehicles] Hybrid Vehicles, Kei Cars, Compact Cars, Minivans [Specifications] DC12V, 80A [Wire Specification] 8.8 sq. mm
[Outer Diameter] Φ9mm [Length] 3m [Unit Weight] Approx. 900g
Country of Origin: China
4906918810105
B09FPMCBRX
Daiji Kogyo/Meltec
Product Introduction\
\
Product Introduction
▪️Peace of mind for sudden battery failures. Anyone can use it safely and securely. Simply connect in the order of the numbers on the booster clip tags. Includes safe insulated covers. Safety Warning *To ensure safe and correct use of this product, please read the instruction manual thoroughly and do not proceed until you fully understand it. *Use booster cables suitable for your vehicle. Using booster cables with insufficient capacity may prevent the engine from starting or cause the cables, clips, or clip covers to overheat, smoke, or melt. ※Select a rescue vehicle with the same or higher battery capacity. ※When starting with booster cables, connect them in the correct order. ※If the engine fails to start using booster cables, recharge the battery. Recharging makes the engine easier to start. ※During connection, avoid incorrect connections (not as per the manual) or short circuits (contact between the red and black clips). Cables, clips, clip covers, etc., may overheat, smoke, or melt. They may also ignite from flammable gases emitted by the battery, causing an explosion. This is dangerous. ※Do not use near open flames or flammable materials during operation. The battery may explode, which is dangerous. ※100A/120A booster cables may not be usable with hybrid vehicles depending on the size of the booster clips. ※Boosting the drive battery of a hybrid vehicle is not permitted.\
Safety Warning\
※To ensure safe and proper use of this product, read the instruction manual thoroughly and do not proceed until you fully understand it. ※Use booster cables suitable for your vehicle. Using booster cables with insufficient capacity may prevent the engine from starting or cause the cables, clips, or clip covers to overheat, smoke, or melt. ※Select a rescue vehicle with a battery capacity equal to or greater than the vehicle's battery. ※When starting with booster cables, connect them in the correct order. ※If the engine fails to start after using booster cables, recharge the battery. Recharging makes the engine easier to start. ※ During connection, avoid incorrect connections (not specified in the manual) or short circuits (contact between red and black clips). This can cause cables, clips, or clip covers to overheat, smoke, or melt, and may ignite flammable gases from the battery, leading to explosion. ※ Do not use near open flames or flammable materials during operation. This poses a risk of battery explosion. ※100A/120A booster cables may not be compatible with hybrid vehicles due to booster clip size limitations. ※Cannot be used to boost the drive battery of hybrid vehicles. Brand Name: Meltec Booster Cable Unit Peace of mind for sudden battery failures. [Approximate Compatible Vehicles] Hybrid Vehicles, Kei Cars, Compact Cars, Minivans [Specifications] DC12V, 80A [Wire Specification] 8.8 sq. mm
[Outer Diameter] Φ9mm [Length] 3m [Unit Weight] Approx. 900g
Country of Origin: China
4906918810105
B09FPMCBRX
Daiji Kogyo/Meltec
Package
Size (Approx.):
Size (Approx.):
192x77x316 mm
Package
Weight (Approx.):
Weight (Approx.):
840 g
1,622 JPY (Including Tax)
Stock :
20
Scheduled Shipping:
2026-07-14
Quantity :
Reference Price from Other Stores
