Tamiya 1/10 Electric RC Car Series No.738 XM-01 PRO Chassis Kit 58738
JAN
4950344587384
ASIN
B0D1DNB5HH
Maker
Model No.
58738
Color
Size
Description
Tamiya - Electric RC Car Series - No. 738 - Chassis Kit - 58738 Product Introduction This compact electric RC car chassis assembly kit features a front-mid mounted motor. Power is transmitted to the front and rear wheels via a propeller shaft from the spur gear located at the center of the chassis. \
The main frame layout positions the battery vertically, rotated 90 degrees to the left side, concentrating weight at the center.\
Three wheelbase options are available by reconfiguring the rear section.\
Suspension features double wishbone independent suspension on all four wheels with aluminum oil dampers. \
The front caster angle is set to 5 degrees, with hub carriers/uprights provided to select from two ride heights.\
Additionally, the front bumper incorporates a skid angle to minimize interference with the road surface.\
\
Front and rear oil-filled gear differentials (set includes two 39T and one 40T gears). \
Front and rear universal drive shafts.\
Front and rear aluminum oil dampers (touring car size). \
Height-selectable hub carrier and upright.\
Turnbuckle upper arms.\
Full bearing specification.\
High-torque servo saver (black).\
Polycarbonate chassis cover.\
Chassis length: 308mm (at 225mm wheelbase). \
Chassis width: 165mm.\
Three wheelbase options available: 210mm, 225mm, 239mm.\
Frame = Bathtub type.\
Drive system = Front mid-ship motor shaft drive 4WD.\
Differential gear = Oil-filled gear differential front and rear.\
Steering = 3-piece tie rod system. \
Suspension = 4-wheel double wishbone.\
Dampers = Aluminum cylinder oil dampers.\
Gear ratio = 8.27:1 when using the included 22T pinion (13 gear ratios from 10.71:1 to 6.28:1 selectable by combining with optional pinions). \
Speed Controller = ESC specification (sold separately).\
Body for M chassis.\
540-type motor.\
Tires.\
RC Mechanics: 2-channel radio set (transmitter, receiver, ESC, low-profile servo recommended). \
Running battery, charger.\
Transmitter power source.\
※This product requires a power source for operation, but batteries, cells, chargers, etc., are not included.\
Additionally, the body, motor, tires, transmitter, RC mechanics, etc., are not included. Additional parts purchase, assembly, and painting are required before operation.\
※This product does not use fuel.\
※Fuel is not included with this product.\
※Paint, adhesive, oil, grease, tools, etc., are not included with this product. \
Safety Warning\
Do not use for any purpose other than its intended use.\
Brand Name: TAMIYA\
Unisex\
Product Instruction Manual\
Material: Plastic\
This is a compact electric RC car chassis assembly kit. The motor is mounted in the front mid-section, and power is transmitted to the front and rear wheels via a propeller shaft from the spur gear located at the center of the chassis. The main frame features a layout where the battery is rotated 90 degrees to the left side and mounted vertically, concentrating weight at the center. Rear section reconfiguration allows selection of three wheelbase options. Suspension features double wishbone independent suspension on all four wheels with aluminum oil dampers. The front caster angle is set to 5 degrees, and two ride height options are available via hub carrier/up
The main frame layout positions the battery vertically, rotated 90 degrees to the left side, concentrating weight at the center.\
Three wheelbase options are available by reconfiguring the rear section.\
Suspension features double wishbone independent suspension on all four wheels with aluminum oil dampers. \
The front caster angle is set to 5 degrees, with hub carriers/uprights provided to select from two ride heights.\
Additionally, the front bumper incorporates a skid angle to minimize interference with the road surface.\
\
Front and rear oil-filled gear differentials (set includes two 39T and one 40T gears). \
Front and rear universal drive shafts.\
Front and rear aluminum oil dampers (touring car size). \
Height-selectable hub carrier and upright.\
Turnbuckle upper arms.\
Full bearing specification.\
High-torque servo saver (black).\
Polycarbonate chassis cover.\
Chassis length: 308mm (at 225mm wheelbase). \
Chassis width: 165mm.\
Three wheelbase options available: 210mm, 225mm, 239mm.\
Frame = Bathtub type.\
Drive system = Front mid-ship motor shaft drive 4WD.\
Differential gear = Oil-filled gear differential front and rear.\
Steering = 3-piece tie rod system. \
Suspension = 4-wheel double wishbone.\
Dampers = Aluminum cylinder oil dampers.\
Gear ratio = 8.27:1 when using the included 22T pinion (13 gear ratios from 10.71:1 to 6.28:1 selectable by combining with optional pinions). \
Speed Controller = ESC specification (sold separately).\
Body for M chassis.\
540-type motor.\
Tires.\
RC Mechanics: 2-channel radio set (transmitter, receiver, ESC, low-profile servo recommended). \
Running battery, charger.\
Transmitter power source.\
※This product requires a power source for operation, but batteries, cells, chargers, etc., are not included.\
Additionally, the body, motor, tires, transmitter, RC mechanics, etc., are not included. Additional parts purchase, assembly, and painting are required before operation.\
※This product does not use fuel.\
※Fuel is not included with this product.\
※Paint, adhesive, oil, grease, tools, etc., are not included with this product. \
Safety Warning\
Do not use for any purpose other than its intended use.\
Brand Name: TAMIYA\
Unisex\
Product Instruction Manual\
Material: Plastic\
This is a compact electric RC car chassis assembly kit. The motor is mounted in the front mid-section, and power is transmitted to the front and rear wheels via a propeller shaft from the spur gear located at the center of the chassis. The main frame features a layout where the battery is rotated 90 degrees to the left side and mounted vertically, concentrating weight at the center. Rear section reconfiguration allows selection of three wheelbase options. Suspension features double wishbone independent suspension on all four wheels with aluminum oil dampers. The front caster angle is set to 5 degrees, and two ride height options are available via hub carrier/up
Package
Size (Approx.):
Size (Approx.):
215x131x467 mm
Package
Weight (Approx.):
Weight (Approx.):
1750 g
31,969 JPY (Including Tax)
Stock :
4
Scheduled Shipping:
2026-03-30
Quantity :
Reference Price from Other Stores
