ELECOM Power Strip - Decorative Interior Design roo't Round 4-Outlet 2.5m Black AVT-D4-2425BK
JAN
4953103281035
ASIN
B01MR74A7K
Maker
Model No.
AVT-D4-2425BK
Color
Size
Description
ELECOM - Show interior power strip-root-root-root-AVT-D4-2425BK
Dust shutter:×
■Plug in plug with insulation cap:×
■Inlet cap included:×
■Current indication lamp:×
■Double covering:×
■Disconnection stop function:×
■Swing plug:×
■Magnet:×
■Hook for wall hanging:×
■Noise filter:×
■Modular jack included:×
■Color:Black Color:Black.\Material:Body:ABS、Plug:PVC Inlet:ユリア樹脂.聽
■Exterior Dimensions:Width80mm×奥行80mm×高24mm ※Excluding cord and plug parts.\Mass:約244g.\N
■Available regions: This product is designed for power supply within Japan, Therefore, it cannot be used outside of Japan. \The top surface is glossy and the side surface is matte. \It is suitable for use around TVs, audio equipment, and tabletop. \The low center of gravity design places the power cord near the bottom for stability on the tabletop.
■Side socket type that makes it difficult for the main unit to fall over and allows for clean cable routing. \The radiant layout is easy to use in meetings, etc. Even when a wide AC adapter is connected, it does not interfere with neighboring ports.
The AC connector port is made of urea resin with excellent heat resistance, which is resistant to melting in the event of heat generation and effective in preventing electrical fires.
■To prevent dust from entering the unused plug port, a dust shutter is attached to the plug port. When the plug is removed from the socket, the shutter closes to prevent dust from entering. \An insulating cap is attached to the root of the AC plug to help prevent fire caused by the tracking phenomenon. \The power cord is made of a double covered cord conforming to the Japan Wiring Device Manufacturers Association standard (JWDS0010), which is effective in preventing electric shock and fire caused by wire breakage or breaking of the cover.
■Compact L-shaped plug is adopted. It fits snugly to the wall, does not interfere with neighboring ports, and does not get in the way. \．The plug specification is a 2-pin type, and it is a convenient 4-outlet type. \The plug specification is a 2-pin plug with 4 convenient plugs. 0570-084-465 TEL. 0570-050-012 FAX. 0570-050-012 Reception hours / 10:00~19:00 Open 24 hours a day, 7 days a week. This product is designed for use in Japan and cannot be used outside of Japan.
Brand name: ELECOM
The "roo't" design tap has a glossy top surface and matte sides, giving it two different textures.
The low center-of-gravity design places the power cord near the bottom for stability on a tabletop.
The side socket type makes it difficult for the main unit to fall over and allows for clean cable routing.
Even when a wide AC adapter is connected, it does not interfere with neighboring ports, making it easy to use at meetings.
The AC port is made of urea resin with excellent heat resistance, which is resistant to melting in the event of heat generation and effective in preventing electrical fires.
A dust shutter is attached to the plug socket to prevent dust from entering the unused plug socket. When the plug is removed from the socket, the shutter closes to prevent dust from entering.
An insulating cap is attached to the base of the AC plug to help prevent fires caused by the tracking phenomenon.
The power cord uses a double covered cord conforming to the Japan Wiring Device Manufacturers Association standard (JWDS0010), which is effective in preventing electric shock and fire due to wire breakage or breaking of the cover.
A compact L-shaped plug is used. It fits snugly to the wall, does not interfere with adjacent ports, and does not get in the way.
4953103281035
ELECOM Power strip, for visible interior decoration roo't, round, 4 ports, 2.5m, black AVT-D4-2425BK
(text created at , 2025-05-12)
Dust shutter:×
■Plug in plug with insulation cap:×
■Inlet cap included:×
■Current indication lamp:×
■Double covering:×
■Disconnection stop function:×
■Swing plug:×
■Magnet:×
■Hook for wall hanging:×
■Noise filter:×
■Modular jack included:×
■Color:Black Color:Black.\Material:Body:ABS、Plug:PVC Inlet:ユリア樹脂.聽
■Exterior Dimensions:Width80mm×奥行80mm×高24mm ※Excluding cord and plug parts.\Mass:約244g.\N
■Available regions: This product is designed for power supply within Japan, Therefore, it cannot be used outside of Japan. \The top surface is glossy and the side surface is matte. \It is suitable for use around TVs, audio equipment, and tabletop. \The low center of gravity design places the power cord near the bottom for stability on the tabletop.
■Side socket type that makes it difficult for the main unit to fall over and allows for clean cable routing. \The radiant layout is easy to use in meetings, etc. Even when a wide AC adapter is connected, it does not interfere with neighboring ports.
The AC connector port is made of urea resin with excellent heat resistance, which is resistant to melting in the event of heat generation and effective in preventing electrical fires.
■To prevent dust from entering the unused plug port, a dust shutter is attached to the plug port. When the plug is removed from the socket, the shutter closes to prevent dust from entering. \An insulating cap is attached to the root of the AC plug to help prevent fire caused by the tracking phenomenon. \The power cord is made of a double covered cord conforming to the Japan Wiring Device Manufacturers Association standard (JWDS0010), which is effective in preventing electric shock and fire caused by wire breakage or breaking of the cover.
■Compact L-shaped plug is adopted. It fits snugly to the wall, does not interfere with neighboring ports, and does not get in the way. \．The plug specification is a 2-pin type, and it is a convenient 4-outlet type. \The plug specification is a 2-pin plug with 4 convenient plugs. 0570-084-465 TEL. 0570-050-012 FAX. 0570-050-012 Reception hours / 10:00~19:00 Open 24 hours a day, 7 days a week. This product is designed for use in Japan and cannot be used outside of Japan.
Brand name: ELECOM
The "roo't" design tap has a glossy top surface and matte sides, giving it two different textures.
The low center-of-gravity design places the power cord near the bottom for stability on a tabletop.
The side socket type makes it difficult for the main unit to fall over and allows for clean cable routing.
Even when a wide AC adapter is connected, it does not interfere with neighboring ports, making it easy to use at meetings.
The AC port is made of urea resin with excellent heat resistance, which is resistant to melting in the event of heat generation and effective in preventing electrical fires.
A dust shutter is attached to the plug socket to prevent dust from entering the unused plug socket. When the plug is removed from the socket, the shutter closes to prevent dust from entering.
An insulating cap is attached to the base of the AC plug to help prevent fires caused by the tracking phenomenon.
The power cord uses a double covered cord conforming to the Japan Wiring Device Manufacturers Association standard (JWDS0010), which is effective in preventing electric shock and fire due to wire breakage or breaking of the cover.
A compact L-shaped plug is used. It fits snugly to the wall, does not interfere with adjacent ports, and does not get in the way.
4953103281035
ELECOM Power strip, for visible interior decoration roo't, round, 4 ports, 2.5m, black AVT-D4-2425BK
(text created at , 2025-05-12)
Package
Size (Approx.):
Size (Approx.):
94x66x260 mm
Package
Weight (Approx.):
Weight (Approx.):
340 g
2,712 JPY (Including Tax)
Stock :
5
Scheduled Shipping:
2026-03-12
Quantity :
Reference Price from Other Stores
