Sanwa Supply Monitor Arm (LCD Display, Single Monitor, Horizontal, Cable Holder Included, Clamp Mount, VESA) CR-LA1501BK

4969887159699

B073QJT7ZC

CR-LA1501BK

Sanwa Supply - Monitor Arm - LCD Display, Single Panel, Horizontal, with Cable Holder, Clamp, VESA-CR-LA1501BK
▪️ Allows free movement in all directions within the horizontal space.\
▪️ Height can be fixed at any position along the support column.\
▪️ Installation methods include clamp-type (supports panel thicknesses from 15mm to 50mm) and grommet-type.\

▪️ Features a slim clamp design, minimizing interference with desk back panels.\
▪️ Compatible with VESA mounting standards (75×75mm, 100×100mm).\
※For 75mm mounting, installation is not possible if the mounting location has indentations.\
▪️ Each joint's stiffness can be adjusted using the included tool.\
▪️ Cables from the LCD display can be routed through the cable holder on the underside of the arm.\
▪️ The tilt angles for the display mounting section are 85° up and 60° down.\
▪️ The pole length is 480mm (from the desk surface to the pole tip), and the pole diameter is 32mm.\
▪️ The weight capacity is 8kg.\
※ The listed compatible inch sizes are general guidelines for monitor sizes. Monitors larger than the listed sizes can be supported as long as they are within the weight capacity.\
\
【 Handling Precautions 】\
※ Do not mount displays exceeding the weight capacity specified in the specifications.\
※ The total weight of the LCD display and the assembled arm may exceed 8kg. When assembling the LCD display with the arm or performing related tasks, always have at least two people present.\
※The factory-set holding force of the arm and tilt joints varies by product. After installing the arm, always adjust the internal nuts and bolts in the joints to achieve the optimal holding force.\
※Operate the arm (e.g., angle adjustment) quietly. Always use both hands for operation. Rough handling or continuous repetitive operations may damage the connection points between the LCD display and the arm, or the base of the arm.\
※When tightening screws, applying force to the tip of the support column may damage the tabletop surface. Ensure the installation location is structurally sound and avoid applying force.\
※Do not install the LCD display so it extends beyond the edge of the table surface, nor operate it in a direction that causes it to extend beyond the edge. Applying downward force to the LCD display while it is overhanging may cause it to detach from the table.\
※Do not install in locations with severe vibration or continuous long-term vibration.\
※The designed operating temperature range is 0°C to 40°C. Do not use in environments exceeding this range.\


■Size: Refer to dimension diagram\


■Weight: 3kg\


■Packaging: 1 package/555×250×120mm・3.5kg\


■Shipping Form: Knockdown assembly type (customer assembly required)\


■Material: Steel (support column), Aluminum (clamp section, arm section), ABS resin (bracket)\


■Movement Range: Screen Rotation (Rotation)/90°\
Left/Right (Swing)/360°\
Screen Left/Right (Pan)/180°\
Screen Up/Down (Tilt)/145°\


■Load Capacity: 8kg\


■Included Accessories: Adjustment tool, Display mounting screws (M4×12, 4 pcs)
Brand Name: Sanwa Supply
Product Model: CR-LA1501BK
Compatible Devices: TVs, Monitors
Package Dimensions: 55.6 x 25.5 x 12.7cm; 3kg
49698871

255x127x556 mm

3410 g