Sanwa Supply Monitor Arm High Load Capacity (20kg) Horizontal Clamp Mount (30-100mm) Black CR-LA1702BK

4969887192788

B07L9PKT63

CR-LA1702BK

Sanwa Supply-CR-LA1702BK-High Load Capacity Horizontal Arm
▪️Allows free movement in all directions within the horizontal space.\
▪️Designed for heavy items like large displays and medical monitors.\
▪️Load capacity is 20kg.\
※When installing on desks or other surfaces, mount only on areas capable of supporting the combined weight of the display and arm. \
※The listed compatible inch sizes are general guidelines for monitor sizes. Monitors larger than the listed sizes can be supported as long as they are within the weight capacity.\
▪️Compatible with VESA mounting standards (75×75mm, 100×100mm).\
※For 75mm mounting, installation is not possible if the mounting location has indentations.\

▪️The stiffness of each joint can be adjusted using the included tool.\
▪️Cables from the LCD display can be routed through the arm's cable holder.\
\
【 Important Handling Precautions 】\
※Do not mount displays exceeding the specified weight capacity.\
※The combined weight of the LCD display and the arm may exceed 25kg. When installing the LCD display and arm, always have at least two people perform the work.\
※The factory-set holding force of the arm and tilt joints varies by product. After installing the arm, always adjust the internal nuts and bolts in the joints to achieve the optimal holding force.\
※Operate the arm (e.g., angle adjustment) gently. Always use both hands. Rough handling or repeated continuous operations may damage the connection points between the LCD display and the arm, or the arm's base.\
※Do not install the LCD display so it extends beyond the edge of the table, nor operate it in a direction that causes it to extend beyond the table edge. Applying downward force to the LCD display while it is overhanging may cause it to detach from the table.\
※Do not install in locations with severe vibration or continuous long-term vibration.\
※The designed operating temperature range is 0°C to 40°C. Do not use in environments exceeding this range.\


■Product Color: Black\


■Dimensions: W130 × D498.5 × H626–728 mm\


■Weight: 5.3 kg\


■Shipping Form: Knockdown Assembly (Customer Assembly)\


■Packaging: 1 Package/853×165×142mm・5.85kg\


■Mounting Method: Clamp\


■Clamp Thickness Range: 30～100mm\


■Total Load Capacity: 20kg\


■VESA Bracket: Width/115mm\


■Movement Range:\
Pan (screen left/right): Left 90°, Right 90°\
Tilt (screen up/down): Down 15°\
Swing (entire unit left/right): Left 30°, Right 30°\
Rotation (screen rotation): 360°\


■Material: Mount/Bracket: Steel (Epoxy Resin Powder Coating)\
Arm: Steel, Zinc\


■Set Contents: Arm, Base, Clamp, Cap, Spanner (13×14mm) ×2, Hex Wrench (6mm), Bolt (3/8“×1/2”) ×2, Bolt (M8×14) ×2, Display Mounting Bolts (M4×10) ×4, Assembly Instructions\


■Included Display Mounting Bolt Set: M4×10 ※4 pcs
Brand Name: Sanwa Supply
Material: Steel
Allows free movement in all directions relative to the horizontal plane.
This arm supports heavy items such as large displays and medical displays.
Load Capacity

170x155x835 mm

6730 g