Sanwa Supply USB-Linked Power Strip, 8 Outlets, with 3P-2P Adapter Included TAP-RE2UN

4969887228852

B000VO00CS

TAP-RE2UN

Sanwa Supply - USB-Linked Power Strip - 8 Outlets - Includes 3P to 2P Adapter - TAP-RE2UN
\
▪️Features USB current sensing. Simply plug a USB cable into your computer's USB port. It detects the current flowing to the computer itself and synchronizes power delivery to peripherals plugged into the linked outlets with the computer's power state. (PC port ×1, Synchronized ports ×4, Non-synchronized ports ×3)\
※Complies with USB 1.1 and 2.0 specifications.\
※Requires USB power consumption current of 500μA or less.\
▪️Equipped with 3 non-synchronized ports that remain powered on constantly, independent of the PC's power status.\

▪️ Features a lockable plug to prevent accidental disconnection.\
▪️ Includes a terminal for connecting a ground wire.\
▪️ Includes a 3P→2P adapter.\
▪️ Complies with RoHS directives.\
1. Ensure the computer power is OFF.2. Insert this product's USB plug into the computer's USB port. 3. If USB devices are already present, connect them to the USB splitter sockets on this product. 4. Plug the power cord of this product into an outlet. 5. With the peripheral device's power switch ON, plug the peripheral device's power cord into the outlet on this product. 6. Ensure the connected device's power consumption is 1500W (15A) or less.\
1. Turn ON the computer's power. When power is supplied to the power strip, the peripheral devices will turn ON. If connected via a USB hub, the peripheral devices will turn ON after the computer recognizes the USB hub. 2. Shut down the computer and turn it OFF. The peripheral devices will turn OFF after a few seconds.\
※This product cannot be used as a standard power strip. \
※The outlets will not power on unless a power signal is detected from the USB ports.\
※This product is designed specifically for computers. It cannot be used for other purposes.\


■Rated Capacity: 15A・125V (Total 1500W maximum)\


■Plug Specification: 3P (includes 3P→2P adapter)\


■Outlets: 3P, 8 outlets (1 for PC main unit, 4 linked outlets, 3 non-linked outlets) (anti-disconnect type)\


■Power Cord Length: 2m\


■Dimensions: W284 × D100 × H40mm\


■Country of Origin: Japan\


■Region of Use: Japan only. Not for use outside Japan.\


■Certification: Complies with Electrical Appliance and Material Safety Law (PSE) technical standards
Brand Name: Sanwa Supply
USB current sensing type. Simply plug the USB cable into your computer's USB port. It detects the current flowing to the computer itself and synchronizes power supply ON/OFF to peripherals plugged into the linked ports based on the computer's power state. (PC port ×1, Synchronized ports ×4, Non-synchronized ports ×3)
※Complies with USB 1.1 and 2.0 specifications.
※USB power consumption current: 500μA or less.
Equipped with 3 non-synchronized ports that remain powered on constantly, independent of the computer's power status. Rated capacity: 15A・125V (total up to 1500W)
Plug specification: 3P (includes 3P→2P adapter)
Outlets: 3P・8 ports (PC main unit ×1, synchronized ports ×4, non-synchronized ports ×3) (with anti-disconnect feature)
Power cord length: 2m
Dimensions: W284 × D100 × H40mm
Country of origin: Japan
4969887228852
B000VO00CS
Sanwa Supply USB-Synchronized Tap 8 Outlets with 3P-2P Adapter TAP-RE2UN\ (text created at , 2025-11-12)

170x48x348 mm

1021 g