Sanwa Supply Apple 10th Generation iPad 10.9-inch LCD Screen Protector Anti-Fingerprint Glossy Film LCD-IPAD22KFP

4969887452561

B0BQYQ4M2N

LCD-IPAD22KFP

Sanwa Supply LCD IPAD22KFP Fingerprint-Resistant Glossy Screen Protector for 10th Generation iPad 10-inch

▪️ Fingerprint-resistant coating prevents smudges from adhering to the film.
▪️ Glossy finish enhances screen clarity and vibrancy.
▪️ Silicone adhesive ensures perfect adhesion across the entire surface, including the display. (Excluding camera area, etc.)
▪️ No double-sided tape required.
▪️ Pre-cut to fit perfectly without trimming.
※ Slightly smaller than the outer frame size for easier application.
▪️ Protects the LCD screen from dust, fingerprints, and scratches.
【Application Instructions】
1. Clean the LCD screen and device surface.
※ Dust trapped underneath causes bubbles.
※ Remove the release film with raised edges from the protective film.
※ Avoid getting dust on the surface.
※ Discard the release film.
3. Apply the protective film to the device.
※ Ensure the film is aligned correctly before pressing down firmly.
※ Press firmly with your fingers to remove any air bubbles.
※ Press firmly with your thumb to ensure full adhesion.
※ Press firmly with your palm to ensure complete adhesion.
※
2. Peel off the release film with raised tabs from the protective film.
※ Take care to avoid dust contamination.
3. Slowly apply the protective film starting from a corner on the front of the device.
※ Avoid pressing hard on the LCD screen during application to prevent damage.
※If dust adheres to the adhesive side of the protective film, remove it using cellophane tape or similar.


■Size (Model): 10.9


■Size (mm): W176.1 × D0.2 × H246.5mm


■Thickness: 0.2mm


■Weight: 14g


■Material: Adhesive side / Silicone film, Outer side / PET


■Quantity: 1 sheet


■Reflectance: 4.52%


■Transmittance: 93.5%


■UV Cut: 99.9%


■Surface Hardness (H): 2~3H


■Type: Anti-Fingerprint Glossy


■Touch Panel Compatible: Compatible
Brand Name: Sanwa Supply
Main Unit ×1
Material: Silicone
Fingerprint-resistant coating prevents fingerprints from adhering to the film.
Glossy type enhances the LCD screen for clear and vivid display.
The adhesive side uses silicone material, ensuring a perfect fit across the entire front surface, including the LCD screen. (Excluding camera area, etc.)
No double-sided tape required.
Designed as a dedicated type, it can be used as-is without cutting. ※Slightly smaller than the outer frame size to ensure easy adhesion.
4969887452561
Sanwa Supply Apple 10th Generation iPad 10.9-inch LCD Protective Fingerprint-Resistant Glossy Film LCD-IPAD22KFP
(text created at , 2025-06-30)

250x4x360 mm

70 g