Sanwa Supply Blue Light Cut LCD Protective Film with Fingerprint and Glare Reduction for Surface Pro 9 LCD-SF11BCAR
JAN
4969887452646
ASIN
B0BXSPFTT6
Maker
Model No.
LCD-SF11BCAR
Color
Size
Description
Sanwa Supply - Blue Light Cut LCD Protective Film with Fingerprint and Glare Reduction for Surface Pro 9 - LCD-SF11BCAR
▪️ Reduces blue light emitted from LED backlights by approximately 26%, primarily targeting the main wavelength (450nm).
▪️ Specifically cuts blue light that is difficult for the eye's lens to absorb and may potentially damage the retina. Recommended for reducing eye strain.
▪️Reduces blue light and features an eye-friendly structure that absorbs light both inside and outside the film.
▪️Fingerprint-resistant coating prevents fingerprints from adhering to the film.
▪️Prevents screen glare for comfortable computer work.
▪️Uses silicone material on the adhesive side, ensuring a perfect fit across the entire front surface, including the LCD screen. (Excluding camera areas, etc.)
▪️ No double-sided tape required.
▪️ Designed as a dedicated type, so use it as is without cutting.
※ Slightly smaller than the outer frame size for easier adhesion.
▪️ Compatible with touch panels.
▪️ Protects the LCD screen from dust, fingerprints, and scratches. 【Usage Instructions】
1. Clean the LCD screen and device body.
(Trapped dust causes bubbles)
2. Peel off the release film with raised edges from the protective film.
(Take care to avoid dust contamination)
3. Slowly apply the protective film starting from a corner on the front of the device.
※ Avoid pressing hard on the LCD screen during application to prevent damage.
※ If dust adheres to the adhesive layer of the protective film, remove it using clear tape or similar.
■ Film Size (Model): 13-inch Wide
■ Dimensions (mm): W282.8 × D0.2 × H204.2mm
■ Weight: 18g
■ Thickness: 0.2mm
■Material: Adhesive side/Silicone film, Outer side/PET
■Type: Blue Light Cut & Fingerprint/Reflection Prevention
■Touch Panel Compatible: Yes
■Reflectance: 1.69%
■Transmittance: 78.3%
■UV Cut: 99.9%
■Surface Hardness (H): 2~3H
■Quantity: 1 sheet
Brand Name: Sanwa Supply
Instruction Manual
Material: Silicone
Reduces approximately 26% of blue light emitted from LED backlights, primarily at the 450nm wavelength.
Specifically targets blue light, which is poorly absorbed by the eye's lens and may damage the retina. Recommended for reducing eye strain.
Reduces blue light and features an eye-friendly structure that absorbs light both inside and outside the film.
Anti-fingerprint coating prevents fingerprints from adhering to the film.
Reduces glare on the screen for comfortable computer work.
4969887452646
Sanwa Supply Blue Light Cut LCD Protective Anti-Fingerprint Anti-Glare Film for Surface Pro 9 LCD-SF11BCAR
(text created at , 2025-05-10)
▪️ Reduces blue light emitted from LED backlights by approximately 26%, primarily targeting the main wavelength (450nm).
▪️ Specifically cuts blue light that is difficult for the eye's lens to absorb and may potentially damage the retina. Recommended for reducing eye strain.
▪️Reduces blue light and features an eye-friendly structure that absorbs light both inside and outside the film.
▪️Fingerprint-resistant coating prevents fingerprints from adhering to the film.
▪️Prevents screen glare for comfortable computer work.
▪️Uses silicone material on the adhesive side, ensuring a perfect fit across the entire front surface, including the LCD screen. (Excluding camera areas, etc.)
▪️ No double-sided tape required.
▪️ Designed as a dedicated type, so use it as is without cutting.
※ Slightly smaller than the outer frame size for easier adhesion.
▪️ Compatible with touch panels.
▪️ Protects the LCD screen from dust, fingerprints, and scratches. 【Usage Instructions】
1. Clean the LCD screen and device body.
(Trapped dust causes bubbles)
2. Peel off the release film with raised edges from the protective film.
(Take care to avoid dust contamination)
3. Slowly apply the protective film starting from a corner on the front of the device.
※ Avoid pressing hard on the LCD screen during application to prevent damage.
※ If dust adheres to the adhesive layer of the protective film, remove it using clear tape or similar.
■ Film Size (Model): 13-inch Wide
■ Dimensions (mm): W282.8 × D0.2 × H204.2mm
■ Weight: 18g
■ Thickness: 0.2mm
■Material: Adhesive side/Silicone film, Outer side/PET
■Type: Blue Light Cut & Fingerprint/Reflection Prevention
■Touch Panel Compatible: Yes
■Reflectance: 1.69%
■Transmittance: 78.3%
■UV Cut: 99.9%
■Surface Hardness (H): 2~3H
■Quantity: 1 sheet
Brand Name: Sanwa Supply
Instruction Manual
Material: Silicone
Reduces approximately 26% of blue light emitted from LED backlights, primarily at the 450nm wavelength.
Specifically targets blue light, which is poorly absorbed by the eye's lens and may damage the retina. Recommended for reducing eye strain.
Reduces blue light and features an eye-friendly structure that absorbs light both inside and outside the film.
Anti-fingerprint coating prevents fingerprints from adhering to the film.
Reduces glare on the screen for comfortable computer work.
4969887452646
Sanwa Supply Blue Light Cut LCD Protective Anti-Fingerprint Anti-Glare Film for Surface Pro 9 LCD-SF11BCAR
(text created at , 2025-05-10)
Package
Size (Approx.):
Size (Approx.):
242x7x359 mm
Package
Weight (Approx.):
Weight (Approx.):
70 g
3,763 JPY (Including Tax)
Stock :
5
Scheduled Shipping:
2026-03-02
Quantity :
Reference Price from Other Stores
