Sanwa Supply HDMI to VGA Converter VGA-CVHD1

4969887592847

B00FJTC9Y2

VGA-CVHD1

Sanwa Supply - VGA-CVHD1 - HDMI to VGA Converter Product Description: This adapter converts HDMI signals to a Mini D-sub 15-pin analog signal (VGA). It can output HDMI output from an Ultrabook or tablet to a VGA input projector or TV. It can also convert the digital audio included in the HDMI signal to a 3.5mm stereo analog audio signal for output. It is USB bus-powered, making it easy to install even in mobile environments. No driver installation is required. Simply plug and play. It is HDCP compliant. Compatible with: PCs with a built-in HDMI output, Windows tablet PCs, and Android tablet PCs. Compatible with LCD TVs, projectors, and PC displays with a built-in Mini D-sub 15-pin (analog) input. Input: 1 x HDMI Type A (19-pin) female. Output: 1 x Mini D-sub 15-pin female, 1 x 3.5mm stereo mini jack. It cannot be used in reverse to convert VGA signals to HDMI. Compatible with: HDMI Ver.1.3b
1920x1080 dots (Full HD/1080P) (60Hz)
1600x1200 dots (60Hz)
1680x1050 dots (60Hz)
1440x900 dots (60Hz)
1440x1050 dots (60Hz)
1366x768 dots (60Hz)
1280x1024 dots (60Hz)
1280x960 dots (60Hz)
1 280x800 dots (60Hz)
1280x768 dots (60Hz)
1280x720 dots (HD/720P) (60Hz)
1152x864 dots (75Hz)
1024x768 dots (60/70/75/85Hz)
800x600 dots (60/72/75/85Hz)
640x480 dots (60/72/75/85Hz)
Please check before purchasing.
-LCD TVs, projectors, and PC displays must also support the above resolutions and refresh rates.
-Resolutions of 1920x1200 dots are not supported.
-Please note that even if the above resolutions are supported, different refresh rates may cause the display to malfunction.
-HDMI signals input from devices other than PCs and tablets may not be output properly. (DVD players, Blu-ray players, etc.)
--Black borders may appear on the top, bottom, left, and right sides due to timing errors when converting from HDMI to analog VGA signals.
--Operation is not guaranteed with all devices.
: Linear PCM 2-channel (48kHz)
: 5.3V
: Supported
: 3.3W
: Temperature 0-50°C, Humidity 80% or less (non-condensing)
: Temperature -20-60°C, Humidity 80% or less (non-condensing)
: ABS
: W60 x D55 x H20mm
: 35g
: USB cable (for power supply, cable length approximately 75cm) x 1, instruction manual
*Some devices may be able to operate this product using only HDMI power from the HDMI device, but operation is not guaranteed with this product.
For stable operation, we recommend powering using the included USB cable.
*When using HDMI output devices such as DVD players, Blu-ray players, and document cameras, the video output resolution and settings may not be displayed correctly. Please check the video output settings of each device and set the resolution and video settings appropriately for the TV or projector you are outputting to. Please note that this product is not compatible with all HDMI devices. *The reverse operation of converting a VGA signal to an HDMI signal is not possible. *Caution (Disclaimer) > Please Read *Please read the instructions carefully and use the product correctly. Brand Name: Sanwa Supply This converter converts an HDMI signal to a mini D-sub 15-pin analog signal (VGA) and an audio signal. This is useful when your PC or other device only supports HDMI, but the output device only supports VGA. It can also convert the digital audio contained in the HDMI signal to a 3.5mm stereo analog audio signal and output it. It is USB bus-powered, so it is easy to install even in a mobile environment. No driver installation is required. Simply connect and use. Input: 1 x HDMI Type A (19-pin) female Output: 1 x Mini D-sub 15-pin female, 1 x 3.5mm stereo mini jack *VGA signal

75x39x91 mm

40 g