Sanwa Supply Display Switch (for Mini D-sub (HD) 15-pin) - 2-Circuit SW-EV2N2
JAN
4969887594674
ASIN
B09WQ3MSN2
Maker
Model No.
SW-EV2N2
Color
Size
Description
Sanwa Supply-Sanwa-Supply-SW-EV2N2-Display Switch (Mini D-sub (HD))
▪️ Switches display signals from two PCs/Mini D-sub (HD) 15-pin connectors to display on one monitor or projector.
▪️ Features an electronic switch system with signal loss within the switch being virtually zero.
▪️ Supports high resolution up to 1920×1440 dots (refresh rate up to 85Hz).
▪️Features an electronic switch mechanism with signal loss within the switcher approaching zero.\
▪️Supports high resolutions up to 1920×1440 dots (refresh rate up to 85Hz).\
▪️Features a linked operation system where the switcher's operation LED turns off when the PC power is OFF.\
※The LED lights only when a display video signal is present. The LED will not light simply by connecting the AC adapter. \
※The LED may remain lit on some PCs due to residual current flow even when the PC is powered off.\
\
※This unit cannot switch between two displays connected to a single PC.\
※Connection cables are not included with this product. Please use separate connection cables.\
■Supported Resolution: Up to 1920×1440 dots (refresh rate up to 85Hz)\
■Interface: Input/Mini D-sub (HD) 15-pin female × 2\
Output/Mini D-sub (HD) 15-pin female × 1\
■Switching Ratio: 2:1 ※Reverse switching not possible\
■Switching Method: Unit switch button\
■Connector Type: Mini D-sub (HD) 15-pin female\
■Power Supply: AC Adapter (DC9V/1A)\
■Environmental Conditions: Operating Temp/Humidity: 5~40°C, Humidity 80% or below (no condensation)\
Storage Temp/Humidity: 0~80°C, Humidity 80% or below (no condensation)\
■Material: Steel\
■Dimensions: W128 × D75 × H45mm\
■Weight: 430g\
■Included Items: AC Adapter (DC9V/1A), Instruction Manual, Warranty Card
Brand Name: Sanwa Supply
This device switches the display signal from two PCs via Mini D-sub (HD) 15-pin connectors to display on a single monitor or projector.
Features an electronic switch mechanism with signal loss within the switcher approaching zero.
Supports high resolutions up to 1920×1440 dots (refresh rate up to 85Hz).
The operation LED on the switcher turns off when the connected PC is powered off. ※The LED illuminates only when a display signal is present. It will not light up when only the AC adapter is connected. *Note: Depending on the PC, a constant current may flow even when the power is off, preventing the LED from turning off. *You cannot switch between two displays using a single PC. *Connection cables are not included with this product. Please use separate connection cables. 4969887594674 B09WQ3MSN2 Sanwa Supply Display Switch (for Mini D-sub (HD) 15-pin) · 2-Circuit SW-EV2N2 (text created at , 2025-11-12)
▪️ Switches display signals from two PCs/Mini D-sub (HD) 15-pin connectors to display on one monitor or projector.
▪️ Features an electronic switch system with signal loss within the switch being virtually zero.
▪️ Supports high resolution up to 1920×1440 dots (refresh rate up to 85Hz).
▪️Features an electronic switch mechanism with signal loss within the switcher approaching zero.\
▪️Supports high resolutions up to 1920×1440 dots (refresh rate up to 85Hz).\
▪️Features a linked operation system where the switcher's operation LED turns off when the PC power is OFF.\
※The LED lights only when a display video signal is present. The LED will not light simply by connecting the AC adapter. \
※The LED may remain lit on some PCs due to residual current flow even when the PC is powered off.\
※This unit cannot switch between two displays connected to a single PC.\
※Connection cables are not included with this product. Please use separate connection cables.\
■Supported Resolution: Up to 1920×1440 dots (refresh rate up to 85Hz)\
■Interface: Input/Mini D-sub (HD) 15-pin female × 2\
Output/Mini D-sub (HD) 15-pin female × 1\
■Switching Ratio: 2:1 ※Reverse switching not possible\
■Switching Method: Unit switch button\
■Connector Type: Mini D-sub (HD) 15-pin female\
■Power Supply: AC Adapter (DC9V/1A)\
■Environmental Conditions: Operating Temp/Humidity: 5~40°C, Humidity 80% or below (no condensation)\
Storage Temp/Humidity: 0~80°C, Humidity 80% or below (no condensation)\
■Material: Steel\
■Dimensions: W128 × D75 × H45mm\
■Weight: 430g\
■Included Items: AC Adapter (DC9V/1A), Instruction Manual, Warranty Card
Brand Name: Sanwa Supply
This device switches the display signal from two PCs via Mini D-sub (HD) 15-pin connectors to display on a single monitor or projector.
Features an electronic switch mechanism with signal loss within the switcher approaching zero.
Supports high resolutions up to 1920×1440 dots (refresh rate up to 85Hz).
The operation LED on the switcher turns off when the connected PC is powered off. ※The LED illuminates only when a display signal is present. It will not light up when only the AC adapter is connected. *Note: Depending on the PC, a constant current may flow even when the power is off, preventing the LED from turning off.
Package
Size (Approx.):
Size (Approx.):
100x84x139 mm
Package
Weight (Approx.):
Weight (Approx.):
580 g
14,927 JPY (Including Tax)
Stock :
5
Scheduled Shipping:
2026-04-22
Quantity :
Reference Price from Other Stores
