Sanwa Supply Gigabit Switching Hub 8-Port with Magnets and Loop Detection Function, Lightweight Plastic Housing LAN-GIGAP801BK

4969887753101

B07DJ47WG1

249-2292

SANWA SUPPLY - Gigabit Compatible - Switching Hub - 8 Ports with Magnet - LAN - GIGAP801BK This 1000BASE-T compatible switching hub features a magnet that can be attached to a steel desk or other surface. This 8-port switching hub supports 1000BASE-T. Its powerful magnet allows for secure attachment to steel desks and cabinets. Its compact plastic case allows for easy installation. It features a loop detection function that alerts you to loop faults. Note: Using other manufacturers' products with this function may result in unstable operation. Its fanless design ensures quiet operation. It features an AUTO-MDIX function that allows for use with both straight and crossover cables. It features an AUTO-Negotiation function that automatically switches between 10/100/1000Mbps speeds depending on the connected device. It also features a power-saving function that automatically detects unlinked ports and reduces power consumption. Shutting down all computers on all ports can save up to 84% power.
▪️The power supply is an AC adapter and a tracking fire prevention cap is already attached.
<Caution>
The amount of heat generated by this product differs depending on whether it is powered on or communicating.
In particular, continuous heavy communication may cause the unit to overheat.
Continuous use in an environment with poor ventilation and poor heat dissipation may cause deterioration of internal components and shorten the product's lifespan.
When using the product, do not place anything on top of the unit and leave at least 10 cm of space around the ventilation openings.

■Number of ports: 8 ports

■Standards: IEEE802.3 (10BASE-T Ethernet), IEEE802.3u (100BASE-TX Fast Ethernet), IEEE802.3ab (1000BASE-T), IEEE802.3x (Flow control for Full-Duplex)

■Access method: CSMA/CD

■Switching method: Store & Forward

■Transmission method: 100Mbps/10Mbps (Full-Duplex, Half-Duplex), 1000Mbps (Full-Duplex)

■Port configuration: 1000BASE-T/100BASE-TX/10BASE-T (RJ-45) AUTO-MDIX x 8 ports

■Buffer memory: 192kbytes (dynamically allocated to each port)

■Flow control : Yes


■Switch Fabric: 16.0Gbps


■Maximum Packet Forwarding Capacity: 23.8Mpps


■Filtering Speed: 1,488,000 packets/second (1,000Mbps), 148,800 packets/second (100Mbps), 14,880 packets/second (10Mbps)


■MAC Address Table: 4,096


■AutoMDI/MDI-X: Supported


■Auto-Negotiation: Supported (1,000/100/10Mbps)


■VCCI Standard: CLASS B Certified


■Size: Main Unit/Approx. W137.9 x D66 x H25.5mm Wall Mounting Hole/Approx. W19.9 x D8 x H3.4mm


■Weight: Approx. 138g


■Cable Length: AC Adapter/Approx. 1.5m (excluding connector)


■Power Consumption (MAX): 3.15W


■Operating Environment: Operating Temperature: 0-40°C Operating Humidity: 10-90% (non-condensing) Storage Temperature: -20-70°C Storage Humidity: 5-90% (non-condensing) Accessories: AC Adapter x 1, Instruction Manual, Wall Mount Set x 1 Brand: Sanwa Supply AC Adapter x 1, Instruction Manual, Wall Mount Set x 1 This 1000BASE-T compatible switching hub can be attached to a steel desk or other surface with a magnet. This is an 8-port switching hub that supports 1000BASE-T. Its powerful magnet allows for secure attachment to steel desks and cabinets. Its compact plastic case allows for easy installation. It features a loop detection function that notifies you of loop faults. Note: Using this product in a mixed environment with other companies' products with this function may result in unstable operation. Its fanless design ensures quiet operation. Its AUTO-MDIX function allows for use with both straight and crossover cables. It features an AUTO-Negotiation function that automatically switches between 10/100/1000Mbps depending on the connected device. It also features a power-saving function that automatically detects unlinked ports and reduces power supply. If you shut down the computers on all ports, you can save up to 84% of power. It is powered by an AC adapter.

92x85x143 mm

290 g