Sanwa Supply Gigabit Switching Hub (8 Ports) with Magnet LAN-GIGAP802BK

4969887753965

B07TNT336G

341-0585

SANWA SUPPLY - Gigabit Compatible - Switching Hub - 8 Ports with Magnet - LAN - GIGAP802BK This 1000BASE-T compatible switching hub features a built-in power supply and a magnet that can be attached to a steel desk or other surface. This 8-port switching hub supports 1000BASE-T. Its powerful magnet allows for secure attachment to steel desks and cabinets. The built-in power supply allows for neat wiring around the outlet. The compact design with a plastic case allows for easy installation. The loop detection function alerts you to loop faults. Note: Using other manufacturers' products with this function may result in unstable operation. The fanless design ensures quiet operation. The AUTO-MDIX function allows for use with both straight and crossover cables. The AUTO-Negotiation function automatically switches between 10/100/1000Mbps speeds depending on the connected device. The power-saving function automatically detects unlinked ports and reduces power consumption. Shutting down all computers connected to all ports can reduce power consumption by up to 86%.
<Caution>
*The amount of heat generated by this product differs depending on whether it is powered on or connected. Continuous use of large volumes of data may cause the unit to overheat. Continuous use in a poorly ventilated environment may cause deterioration of internal components and shorten the product's lifespan. When using the product, do not place anything on top of the unit and leave at least 10 cm of space around the ventilation openings. Number of ports: 8 ports Standards: IEEE802.3 (10BASE-T Ethernet) IEEE802.3u (100BASE-TX Fast Ethernet) IEEE802.3ab (1000BASE-T) IEEE802.3x (Flow control for Full-Duplex) Access method: CSMA/CD Switching method: Store & Forward Transmission method: 100Mbps/10Mbps (Full-Duplex, Half-Duplex), 1000Mbps (Full-Duplex) Port configuration: 1000BASE-T/100BASE-TX/10BASE-T (RJ-45) AUTO-MDIX x 8 ports

■Buffer memory: 192Kbytes (dynamically allocated to each port)

■Flow control: Yes

■Switch fabric: 16Gbps

■Maximum packet forwarding capacity: 23.8Mpps

■Filtering speed: 1,488,000 packets/second (1,000Mbps), 148,800 packets/second (100Mbps), 14,880 packets/second (10Mbps)

■MAC address table: 9K

■AutoMDI/MDI-X: Supported

■Auto-negotiation: Supported (1,000/100/10Mbps)

■Dimensions: Approx. W177.9 x D86 x H30mm

■Weight: Approx. 196g (main unit only)

■Wall-mounting hole size: Approx. W20 x D8 x H3.9mm

■Power cable length: 150cm

■Power consumption (MAX): 5.1W

■Operating environment: Operating Temperature: 0-40°C Operating Humidity: 10-90% (non-condensing) Storage Temperature: -20-70°C Storage Humidity: 5-90% (non-condensing) Accessories: Power Cable x 1, Instruction Manual Warranty: 1 year from date of purchase Brand: Sanwa Supply Power Cable, Instruction Manual Material: Plastic This is an 8-port switching hub compatible with 1000BASE-T. Equipped with a powerful magnet, it can be securely attached to steel desks and cabinets. The built-in power supply allows for neat wiring around the outlet. The compact design with a plastic case allows for easy installation. It features a loop detection function that notifies you of loop faults. Note: Using it in a mixed environment with other companies' products with this function may result in unstable operation. Its fanless design ensures quiet operation. It features an AUTO-MDIX function, allowing you to use either straight or crossover cables. It also features an AUTO-Negotiation function that automatically switches between 10/100/1000Mbps speeds depending on the connected device. It is equipped with a power-saving function that automatically detects unlinked ports and reduces power supply. If you shut down the computers on all ports, you can save up to 86% of power. 4969887753965 Sanwa Supply Gigabit Switching Hub (8 Ports)

153x41x234 mm

390 g