Sanwa Supply DisplayPort to HDMI Conversion Adapter (8K Compatible) AD-DP8KHDR

4969887769126

B0CGWYFQH2

AD-DP8KHDR

Sanwa Supply DisplayPort to HDMI Conversion Adapter AD-DP8KHDR

▪️This cable-integrated adapter converts a DisplayPort connector (female) to an HDMI port (female).
※It cannot convert a DisplayPort on the display side to an HDMI port.
▪️Supports resolutions up to 8K/60Hz and 4K/120Hz, outputting beautiful, high-definition HDMI signals.
▪️It can convert and output both video and audio signals.
▪️The short integrated cable design allows for easy handling and connection without interfering with other interfaces.
▪️The cable section features triple shielding: “Aluminum Shield (Twisted Pair Cable) → Aluminum Shield → High-Density Braided Shield” to prevent noise interference.
▪️ Features gold-plated pins that are rust-resistant and exhibit minimal signal degradation over time. 【Important Notes】 ※ Operates using power supplied from the DisplayPort port of the connected device. May not function or may operate unstable if connected to a device with unstable power supply. ※ May not function properly depending on the environment or device. ※ Operation is not guaranteed with all devices.
※HDMI cable is not included.
※Cannot connect from an HDMI output PC or AV device to a display or TV with DisplayPort input.
【 Video Input Port 】


■Port Type: DisplayPort Male
【 Video Output Port 】


■Port Type: HDMI Type A (19-pin) Female


■Supported Resolutions: Primary supported resolutions/7680×4320 (60Hz, 4:4:4)
3840×2160 (120Hz, 4:4:4)
3840×2160 (60Hz, 4:4:4)\ n1920×1080p
※The connected PC, projector, display, and cable must support the same resolution.


■Maximum Supported Resolution: 8K/60Hz


■HDR: Supported


■HDCP: HDCP1.4, HDCP2.2, HDCP2.3
【 Video Standards 】


■DisplayPort Standard: Ver1.4


■HDMI Standard: HDMI2.1
【 Common Specifications 】


■Cable Length: 0.2m


■Cable Diameter: 4.9mm


■Size: W53.5×D22×H11mm


■Weight: Approx. 32g


■Shielding Method: Triple Shielding (Cable Section)
Brand Name: Sanwa Supply
This is a cable-integrated conversion adapter that converts a DisplayPort connector (female) to an HDMI port (female). *It cannot convert the DisplayPort on the display side to an HDMI port.
It supports resolutions up to 8K/60Hz and 4K/120Hz, enabling the output of beautiful, high-definition HDMI signals.
It can convert and output both video and audio signals.
The short integrated cable makes it easy to handle and connect without interfering with other interfaces.
The cable section features triple shielding: “Aluminum shield (twisted pair cable) → Aluminum shield → High-density braided shield” to prevent noise interference.
4969887769126
Sanwa Supply DisplayPort to HDMI Converter Adapter (8K Compatible) AD-DP8KHDR
(text created at , 2025-05-09)

88x29x180 mm

70 g