Sanwa Supply DisplayPort to DVI Conversion Adapter Active Type AD-DPDVA02

4969887774526

B0FTYYGVJ3

AD-DPDVA02

Sanwa Supply-Sanwa-Supply-AD-DPDVA02-DisplayPort-to-DVI Conversion Adapter (Active Type)
▪️ This cable-integrated conversion adapter converts a DisplayPort connector (female) on a PC to a DVI port (female). ※ It cannot convert a DisplayPort on the display monitor side to a DVI port.
▪️ This active adapter can convert a DisplayPort output (Single-Mode, not Dual-Mode compatible) to a DVI signal.
▪️ The short integrated cable makes it easy to handle and prevents interference with other interfaces.
▪️ This active adapter can convert even single-mode DisplayPort output (not Dual-Mode compatible) to a DVI signal.\
▪️ The integrated short cable makes it easy to handle and allows connection without interfering with other interfaces.\
▪️ The cable section features triple shielding: “Aluminum Shield (Twisted Pair Cable) → Aluminum Shield → High-Density Braided Shield” to prevent noise interference.
▪️ Features gold-plated pins that are highly resistant to corrosion and exhibit minimal signal degradation over time.\
▪️ Uses lead-free solder containing virtually no lead, a substance that causes environmental pollution in soil and groundwater.\
【 Common Specifications 】\


■Connector Type: DisplayPort Male - DVI 24-pin (DVI-D) Female\
【 Video Input Port 】\


■Port Type: DisplayPort Male\
【 Video Output Port 】\


■Port Type: DVI (24-pin) Female\


■Maximum Supported Resolution: 1920×1200\


■Primary Supported Resolutions: 1920×1200, 1920×1080, 1600×1200\
【 Video Output Port 】\


■HDCP: HDCP 1.4\
【 Video Standards 】\


■DisplayPort Standard: Ver1.4\


■DVI Standard: Digital Single Link\
【 Common Specifications 】\


■Operating Temperature: 0 to 45°C\


■Storage Temperature: -10 to 80°C\


■Operating Humidity: 10 to 85% RH (non-condensing)\


■Storage Humidity: 5 to 90% RH (non-condensing)\


■Conversion Method: Active Type\


■Shielding Method: Triple Shielding\


■Cable Length: 0.2m\\ n

■Cable Diameter: 4.5mm\


■Dimensions: Approx. W43.2 × D45 × H14.65mm\


■Weight: Approx. 36g
Brand Name: Sanwa Supply
This is a cable-integrated conversion adapter that converts a DisplayPort connector (female) installed on a PC to a DVI port (female). *Cannot convert DisplayPort from the monitor side to DVI.
This active adapter can convert even single-mode DisplayPort output (not Dual-Mode compatible) to DVI signal.
The short integrated cable makes it easy to handle and connect without interfering with other interfaces.
The cable section features triple shielding: “aluminum shield (twisted pair cable) → aluminum shield → high-density braided shield” to prevent noise interference.
It uses gold-plated pins that are highly resistant to rust and exhibit minimal signal degradation over time.
4969887774526
B0FTYYGVJ3
Sanwa Supply DisplayPort to DVI Conversion Adapter Active Type AD-DPDVA02
(text created at , 2025-12-16)

90x25x180 mm

78 g