Sanwa Supply Energy-Saving Tap (3-Prong, 6 Outlets, 5m) TAP-S10N2-5

4969887828595

B0C3KT5JK9

TAP-S10N2-5

Sanwa Supply - Sanwa Supply - TAP-S10N2-5 - Energy-Saving Power Strip (3-pin, 6 outlets, 5m)
▪️ Equipped with a shutter to prevent dust from entering the outlets.

▪️ Layout allows for easy connection of the AC adapter. (The AC adapter outlet is always powered.)
▪️ Connected devices can be turned on and off individually. (5 outlets only)
▪️ A power switch with an indicator light prevents forgetting to turn off the power.
▪️ Includes a centralized switch. All 6 outlets can be turned on and off simultaneously.
▪️ A built-in breaker (overcurrent protection circuit) activates if the capacity is exceeded, preventing fires.
▪️ The plug features an insulating cap at the base of the plug prongs to effectively prevent tracking fires.
<<Built-in Breaker (Overcurrent Protection)>>
If the total power consumption of connected devices exceeds 1500W, the breaker will activate and cut off the power. *If the circuit breaker trips, disconnect any connected devices from the power strip, remove them so that their current draw is below 1500W, and press the reset button. <Individual Switch (with Lamp)> The independent lamp switch allows you to turn the current to unused devices on and off to save energy. The lamp lights up to confirm that the device is powered. <Double-Insulated Cord> The double-insulated cord is durable and safe. <Insulated Cap to Prevent Tracking Fires> The swing plug is equipped with an insulating cap that is extremely effective in preventing tracking. *What is Tracking? If a plug is not inserted or removed for an extended period of time, dust can accumulate between the outlet and the plug, causing moisture. If voltage is applied under this condition, leakage current can flow along the surface of the outlet between the plug's prongs, resulting in a tiny spark discharge. This causes the surface to deteriorate, forming a carbonized conductive path (track), leading to insulation breakdown. This phenomenon is called tracking. As a result, a flame may suddenly break out between the plug and the outlet, which could lead to a fire.

■Rated capacity: 15A, 125V (up to 1500W total)

■Outlet type: 3P

■Plug type: 2P with earth cord

■Plug specifications: Parallel type

■Insulating cap: Yes

■Outlet type: Normal type

■Outlet spacing: 39mm

■Number of outlets: 6

■Shutter: Yes

■Earth cord length: 10cm

■Power cord length: 5m

■Breaker: Centralized switch type

■Switch: Centralized switch, individual switch

■Cord: HVCTF2.0 square (SQ) x 3 core, 0.75 square (SQ) x 1 core (earth wire)

■Finished dimensions: Approximately 8.5mm diameter

■Size: W308 x D64 x H25mm

■Weight: 598g

■Use area: Japan only. Cannot be used outside of Japan.

■Certification: Compliant with the technical standards of the Electrical Appliance and Material Safety Act (PSE). Brand Name: Sanwa Supply. Equipped with a shutter to prevent dust from entering the outlet. The layout allows for easy connection of the AC adapter. (The AC adapter outlet is always powered.) Connected devices can be individually turned on and off (5 outlets only). A power switch with an indicator prevents forgetting to turn it off. Equipped with a centralized switch. All 6 outlets can be turned on and off at the same time. 4969887828595 Sanwa Supply Energy-Saving Tap (3P, 6 Outlets, 5m) TAP-S10N2-5 (text created at , 2025-05-10)

155x65x411 mm

1130 g