Bath Handrail for Prefabricated Bath Units UST-130UB/536-632 Green

4970210003350

B07GB2BZ5S

S0932

Aron Chemical - Bathtub Handrail for Unit Baths - UST-130UB - Green Product Introduction Bathtubs/Locations Where Installation is Not Possible Bathtubs: Wooden bathtubs, marble bathtubs Locations: Tiled washing areas, pebble-covered washing areas, soft cushioned flooring, large public baths, hot spring facilities Even if your bathtub or location is not listed above, please confirm that the product can be securely fixed to the bathtub before use. \


■Bathtubs with different wall heights\


■Significantly deteriorated bathtubs
▪️Installing the product on a deteriorated bathtub, such as one with cracks or a rough surface, may damage the bathtub.
▪️ Bathtub aging varies depending on usage conditions.\


■ Bathtubs with a significantly curved inner surface Gaps between the pressure plate and bathtub wall may cause the product to become dislodged.\


■ Bathtubs with walls less than 4.5cm thick

■ Bathtubs with walls exceeding 13cm thick
▪️ Bathtubs with an inner wall slope exceeding 10° Even if the slope is 10° or less, installation is not possible if the thickness 14cm below the bathtub rim exceeds 13cm.\


■Bathtubs with significant curvature or specific areas (corners) Installation is not possible in areas where the difference between the thickest and thinnest points of the bathtub wall exceeds 3cm.\


■Bathtubs with tiled exteriors and hollow interiors Installation is not possible if the bathtub exterior is tiled and the interior is hollow. We cannot be held responsible for any damage to the bathtub if installed in a bathtub meeting the above conditions. \
\
Important Notice (Disclaimer) > Must Read\
Bathtubs/Locations Where Installation is Not Possible Bathtubs... Wooden bathtubs, marble bathtubs Locations... Tiled washing areas, pebble-laid washing areas, cushioned soft flooring, large public baths, hot spring facilities Even if not listed above, please confirm the product can be securely fixed to the bathtub before use.

■Bathtubs with Uneven Wall Heights

■Severely deteriorated bathtubs
▪️Installation on deteriorated bathtubs (e.g., cracked bathtubs, bathtubs with rough surfaces) may cause bathtub damage.
▪️Bathtub deterioration varies depending on usage environment.

■Bathtubs with significantly curved inner walls Gaps between the pressure plate and bathtub wall may cause the product to become dislodged.

■Bathtubs with wall thickness less than 4.5cm

■Bathtubs with wall thickness exceeding 13cm
▪️Bathtubs with an inner wall slope exceeding 10° Even if the slope is 10° or less, installation is not possible if the thickness 14cm below the bathtub rim exceeds 13cm.

■Bathtubs with significant curvature or specific areas (corner sections) Installation is not possible in areas where the difference between the thickest and thinnest points of the bathtub wall exceeds 3cm.

■Tiled bathtubs with hollow interiors Installation is not possible if the exterior of the bathtub is tiled and the interior is hollow. We cannot be held responsible for any damage to the bathtub if installed on a bathtub that meets the above conditions. Brand Name: Aron Kasei Hex Wrench Compatible with unit baths previously impossible to install. Space-saving design allows for a spacious washing area. (Cover) Polypropylene (Grip Support) Stainless Steel *Grip section features elastomer coating (mold-proof coating) (Frame) Aluminum
4970210003350
B07GB2BZ5S
Unit Bath Compatible Bathtub Handrail UST-130UB/536-632 Green
(text created at , 2025-10-28)

333x243x509 mm

5470 g