CARMATE Car Drink Holder Cup Holder Quattro Type S DZ591

4973007431077

B0BKPKN4JX

DZ591

Carmate - Drink Holder - Cup Holder - Quattro - DZ591 Product Description
Addictive Holding Feel
▪️Quattro Holder Design for Easy Access
To make inserting and removing drink containers easier, even while driving, the holder's shape smoothly guides the container into the holder. For ease of access, the Quattro Holder is made of durable, low-friction polycarbonate resin. This allows for smooth insertion and removal, even with cup-type drink containers that have a non-slip surface. (Compared to our previous product)
▪️Compatible with a variety of drink containers
Not only canned coffee, but also PET bottles, wide cans, and slim cans are compatible. It can hold coffee cups, cans, round PET bottles up to 74mm in diameter, and square PET bottles up to 74mm diagonal. It can also hold car ashtrays, air fresheners, and air purifiers up to 74mm in diameter.
*Slim canned drinks can be stored in this product, but they will not be held in place by the four-point Quattro hold.
▪️About Container Storage and Holding Power
・A variety of containers can be stored, from narrow containers like canned coffee to wide containers like 500ml hot water bottles.
・Mug bottles (water bottles) can also be stored, but please note that even within the supported dimensions, they may exceed the weight limit (over 630g).

・Thin containers (diameter 59mm or less) such as canned coffee and energy drinks can be stored, but they will not be held in place at four points.
・Especially suitable for holding drinks with a tapered bottom, such as chilled cups and convenience store coffee.
・Cylindrical containers like cans and plastic bottles can also be securely held.
*Narrow plastic bottles with a diameter of 59mm or less, or plastic bottles with a narrow waist, will not be held in place at four points.
*Empty containers (especially plastic bottles with a narrow waist) may not be stable.
▪️Top Ring Color: Product Number: Black: DZ590, Silver: DZ591, Gunmetal: DZ592, Red Metallic: DZ593
▪️Compatible Air Conditioner Shapes This product can be installed on vehicles with horizontal fin, vertical fin, and round air conditioner vents. However, installation may not be possible under certain conditions. Do not install if it interferes with the operation of levers, door handles, or switches. Even if the installation requirements are met, it may not be possible to use the original drink holder or it may interfere with other equipment (audio, glove box, pillars, etc.). Installing this product may prevent operation of the air conditioner fins.
▪️HOT AND COLD DRINK USE: "Keep drinks hot or cold by utilizing your car's air conditioner vent." Attach to your car's air conditioner vent using two air conditioner mounting clips. Attach to your car's air conditioner vent to keep drinks hot or cold using the air conditioning's wind.
▪️Before Purchasing
・Product Dimensions: Height 86mm, Width 93mm, Depth 112mm
・Can be installed on air conditioner vents that meet all of the conditions A through F.
*Do not install if it interferes with the operation of levers, door handles, or switches.
*Even if the conditions are met, it may not be possible to use it with the original drink holder, or it may interfere with equipment (audio, glove box, etc.).
*Once this product is installed, the air conditioner fins will no longer function.
*This product is installed using a combination of adhesive tape and clips.
A. The width and depth of this product must be sufficient.
B. There must be space above this product for adding and removing drinks. (The height from the bottom of the drink holder to the ring is 72mm.)
C. The air conditioner vent and air conditioner fins must have the shape and dimensions shown below.
・Fin width: 40mm or more Fin thickness: 4mm or less Fin depth: 40mm or less
*Not compatible with types with angled fins rather than horizontal. *If there is only one fin, the airflow direction adjustment knob must be 50mm or less. *Not compatible with types with fins that are not vertical. D. The air conditioner must be tilted between 0 and 30 degrees. E. The bottom of the air conditioner must not protrude significantly. F. The bottom of the air conditioner must not be significantly concave. G. The top of the air conditioner must not protrude significantly.

■Representative vehicle models that cannot be installed on air conditioners even if they meet conditions A through G: Mark X (up to October 2009)
▪️Caution: Please read carefully: Do not install in a location that may interfere with airbag deployment or driving. Do not leave drinks on the product or place drinks weighing more than 630g on it. This may damage the product or the air conditioner fins. Do not place items that may deform or change shape due to heat, or that may burst (gas lighters, aerosol products). The product may not be stable when driving on rough roads or depending on the shape of the drink container. Check stability before use.・Depending on the shape and material of the drink container, it may be difficult to insert or remove it. In that case, please insert or remove it while holding the holder body when the vehicle is stopped. Recommended car models:
▪️# indicates that the notation changes depending on the grade, etc. (Example) AXAH5# → AXAH52, AXAH54, etc. *Models as of July 2024 (R6) and later have not been investigated. Noah (R8#W / R8#G series, January 2014 to January 2022): Can be installed on left-corner, right-corner (*3), and center-left (*3) air conditioner outlets. Voxy (R8#W / R8#G series, January 2014 to January 2022): Can be installed on left-corner, right-corner (*3), and center-left (*3) air conditioner outlets. Esquire (ZRR8#G / ZWR80G series, H26 (October 2014) - R4 (January 2022)
: Can be installed on the left, right (*3) and center left (*3) air conditioning outlets
Yaris
(KSP21# / MXPA1# / MXPH1# series, R2 (February 2020) onwards)
: Can be installed on the left and right corner air conditioning outlets
GR Yaris
(GXPA16 / MXPA12, R2 (September 2020) onwards)
Yaris Cross
(MXPB1# / MXPJ1# series, R2 (August 2020 onwards): Can be installed on left and right corner air conditioner outlets. Rise (A200A/A210A/A201A/A202A, R1 (November 2019 onwards): Can be installed on center left and center right air conditioner outlets. Land Cruiser 70 (GDJ76W, R5 (November 2023 onwards): Can be installed on left, right, and center left air conditioner outlets. Roomy (M900A/M910A, November 2016 onwards): Can be installed on left and right corner air conditioner outlets. X-Trail (T33 series, July 2022 onwards): Can be installed on left and right corner air conditioner outlets. Elgrand (E52 series, August 2010 onwards): Can be installed on left, right, center left, and center right air conditioner outlets. Serena (C27 series, August 2016 to December 2022): Can be installed on left and right corner air conditioner vents. Serena (C28 series, December 2022 onwards): Can be installed on left, right, centre left and centre right air conditioner vents. Dayz Roox (B21A, February 2014 to March 2020): Can be installed on left corner (*1), right corner (*3), Can be installed on center left (※3) and center right (※1) air conditioner outlets. Note (E12 series, September 2012 to August 2021): Can be installed on right corner air conditioner outlets. Step WGN (RP1 to RP5 series, April 2015 to May 2022): Can be installed on right corner (※1), center left, or center right (※3) air conditioner outlets. Fit (GK3 to 6 / GP5 / GP6 series, September 2013 (H25) to February 2020 (R2))
: Can be installed on left and right corner air conditioner outlets.
Fit
(GR1 to GR8 series, February 2020 onwards)
Freed
(GB5 to GB8 series, September 2016 (H28) to June 2024 (R6))
: Can be installed on left and right corner air conditioner outlets. Can be installed on the air conditioning outlets of Toyota Freed (GT1-8 series, R6 (June 2024 onwards)) Can be installed on the left corner, right corner, and center left air conditioning outlets. Legacy Outback (BS series, October 2014 to December 2021) Can be installed on the left corner (※2) and right corner (※2) air conditioning outlets. Swift (ZC#3S / ZD#3S series, H29 (January 2017 onwards)
: Can be installed on the left corner (*2) and right corner (*2, 3) air conditioning vents.
Copen
(LA400K, H26 (June 2014 onwards)
: Can be installed on the left corner, center left, and center right air conditioning vents.
Rocky
(A200S/A210S/A201S/A202S, R1 (November 2019 onwards)
: Can be installed on the center left and center right air conditioning vents.
*1: May not be compatible with the original drink holder.
*2: Depending on the height of the drink container, it may interfere with the pillar when inserting or removing it.
*3: It may be difficult to see the navigation screen, hazard button, switches, etc.
Safety Warning
・Do not install in a location that may cause airbag deployment or interfere with driving. Do not leave drinks in the holder or place drinks weighing more than 630g on it. This may damage the product or the air conditioning fins. Do not place items that may deform, deteriorate, or explode due to heat (such as gas lighters or aerosol products). The holder may not be stable when driving on rough roads or depending on the shape of the drink container. Check the stability before use. Depending on the shape and material of the drink container, it may be difficult to insert or remove. In this case, hold the holder body while the vehicle is stopped. Brand Name: CARMATE. This drink holder fits your convenience store coffee without tipping. The Quattro holder design securely holds the drink from all four sides, ensuring stable support for cup-type drink containers like convenience store coffee, which are often unstable with conventional flap-style drink holders. (Compared to our previous product) It can hold coffee cups, cans, round PET bottles up to 74mm in diameter, and square PET bottles up to 74mm diagonal. Attaches to horizontal, vertical, or round air vents using the two included clips. Featuring a sporty carbon fiber design, this product adds a touch of elegance to your vehicle's interior. (Product ID: 4973007431077) CARMATE Quattro Type S Drink Holder (DZ591) (created on 2025-05-12)

134x114x178 mm

200 g