CARMATE Car Drink Holder Quattro X Twin Cup Holder Carbon-Style Chrome Plating DZ412
JAN
4973007436119
ASIN
B06ZZH68VR
Maker
Model No.
DZ412
Color
Size
Description
Carmate - Drink Holder - Twin Cup Holder Quattro X Carbon-Look - Black Plated - DZ412 Product Description
▪️ Increase your drink holder count from one to two
This drink holder allows you to use one factory cup holder in your car to create two drink storage spaces.
▪️ Securely attaches to the factory cup holder
The vibration-absorbing elastomer cushion is firmly pressed against the wall of the factory cup holder by the spring inside the mounting section.
Easy installation without tools.
▪️ Compatible Genuine Cup Holder Requirements
For round drink holders: An inner diameter of 70mm to 85mm and a depth of at least 62mm is required.
For square factory cup holders: Each side must be 70mm to 85mm and a depth of at least 62mm.
* Cannot be used with factory cup holders that slide out from the instrument panel.
▪️ "Double Slide Mechanism" for Desired Position
The double slide mechanism allows for fine adjustment to your desired position. It can slide up to 105mm vertically and 30mm horizontally. The four-point "QUATTRO" structure is convenient for convenience store coffee. The four-sided support structure securely holds cup-type drink containers, including convenience store coffee. The flap design smoothly guides the drink container in, and the low-friction material makes it easy to access drink containers while driving. The design is compatible with a variety of drinks. It can accommodate not only convenience store coffee, but also PET bottles, wide cans, and slim cans. It can hold cafe cups, cans, and round PET bottles up to 70mm in diameter, as well as square PET bottles up to 72mm diagonal. It can also hold car ashtrays, air fresheners, and air purifiers up to 70mm in diameter. Slim can-type drink containers (52mm in diameter) can be used with this product, but the holding power will be weaker.
▪️Features a sporty carbon-look design. This carbon-look design, which is becoming increasingly popular in vehicle interiors, adds a touch of elegance to your vehicle's interior. Installing this product will also enhance its appearance. --------------- Recommended Vehicles (Manufacturer/Model/Year):
■BMW / 2 Series Active Tourer (F45) / 2A15, 2C15, 2A20, 6S15, 2C20, 6S15W, 6T20, 6T20 / February 2014 (February 2014) and later. Install this product on top of the factory drink holder, allowing you to easily fit things like plastic bottles. *May interfere with accessory sockets.
■BMW / 2 Series Gran Tourer (F46) / 2D20, 2D15, 6V20, 2E20, 6V15, 6W20, 6V15W / February 2014 (February 2014) onwards
Install this on top of the factory drink holder to improve usability by allowing you to store items such as plastic bottles.
*May interfere with the accessory socket.
■Suzuki / Alto Works / HA36S / December 2015 (December 2015) to December 2021 (December 2021)
Recommended for the drink holder in front of the shift lever.
*If you store tall containers in it, it may interfere with the air conditioning panel.
■ Suzuki / Swift, Swift Sport / ZC43S, ZC53S, ZD53S, ZC83S, ZD83S, ZC33S / January 2017 (January 2017) onwards
We recommend installing it in the drink holder behind the center console.
■ Suzuki / Spacia, Spacia Custom / MK53S / December 2017 (December 2017) onwards
We recommend installing it in the drink holder to the right of the meter.
■ Daihatsu / Copen / L880K / June 2002 (June 2002) to September 2012 (September 2012)
We recommend installing it horizontally in the factory drink holder.
It can also be installed vertically, but this can be inconvenient as it will prevent you from opening the console box quickly, such as when refueling.
■Honda / S660 / JW5 / April 2015 (April 2015) - December 2021 (December 2021)
We recommend installing it in the drink holder on the side (rear) of the seat between the driver's seat and the passenger seat.
Some people's elbows may hit it, so in that case, please rotate it and install it on the passenger side.
Because it is installed behind the seat, it is difficult to take a drink from the driver's seat even with this product attached.
▪️ Increase your drink holder count from one to two
This drink holder allows you to use one factory cup holder in your car to create two drink storage spaces.
▪️ Securely attaches to the factory cup holder
The vibration-absorbing elastomer cushion is firmly pressed against the wall of the factory cup holder by the spring inside the mounting section.
Easy installation without tools.
▪️ Compatible Genuine Cup Holder Requirements
For round drink holders: An inner diameter of 70mm to 85mm and a depth of at least 62mm is required.
For square factory cup holders: Each side must be 70mm to 85mm and a depth of at least 62mm.
* Cannot be used with factory cup holders that slide out from the instrument panel.
▪️ "Double Slide Mechanism" for Desired Position
The double slide mechanism allows for fine adjustment to your desired position. It can slide up to 105mm vertically and 30mm horizontally. The four-point "QUATTRO" structure is convenient for convenience store coffee. The four-sided support structure securely holds cup-type drink containers, including convenience store coffee. The flap design smoothly guides the drink container in, and the low-friction material makes it easy to access drink containers while driving. The design is compatible with a variety of drinks. It can accommodate not only convenience store coffee, but also PET bottles, wide cans, and slim cans. It can hold cafe cups, cans, and round PET bottles up to 70mm in diameter, as well as square PET bottles up to 72mm diagonal. It can also hold car ashtrays, air fresheners, and air purifiers up to 70mm in diameter. Slim can-type drink containers (52mm in diameter) can be used with this product, but the holding power will be weaker.
▪️Features a sporty carbon-look design. This carbon-look design, which is becoming increasingly popular in vehicle interiors, adds a touch of elegance to your vehicle's interior. Installing this product will also enhance its appearance. --------------- Recommended Vehicles (Manufacturer/Model/Year):
■BMW / 2 Series Active Tourer (F45) / 2A15, 2C15, 2A20, 6S15, 2C20, 6S15W, 6T20, 6T20 / February 2014 (February 2014) and later. Install this product on top of the factory drink holder, allowing you to easily fit things like plastic bottles. *May interfere with accessory sockets.
■BMW / 2 Series Gran Tourer (F46) / 2D20, 2D15, 6V20, 2E20, 6V15, 6W20, 6V15W / February 2014 (February 2014) onwards
Install this on top of the factory drink holder to improve usability by allowing you to store items such as plastic bottles.
*May interfere with the accessory socket.
■Suzuki / Alto Works / HA36S / December 2015 (December 2015) to December 2021 (December 2021)
Recommended for the drink holder in front of the shift lever.
*If you store tall containers in it, it may interfere with the air conditioning panel.
■ Suzuki / Swift, Swift Sport / ZC43S, ZC53S, ZD53S, ZC83S, ZD83S, ZC33S / January 2017 (January 2017) onwards
We recommend installing it in the drink holder behind the center console.
■ Suzuki / Spacia, Spacia Custom / MK53S / December 2017 (December 2017) onwards
We recommend installing it in the drink holder to the right of the meter.
■ Daihatsu / Copen / L880K / June 2002 (June 2002) to September 2012 (September 2012)
We recommend installing it horizontally in the factory drink holder.
It can also be installed vertically, but this can be inconvenient as it will prevent you from opening the console box quickly, such as when refueling.
■Honda / S660 / JW5 / April 2015 (April 2015) - December 2021 (December 2021)
We recommend installing it in the drink holder on the side (rear) of the seat between the driver's seat and the passenger seat.
Some people's elbows may hit it, so in that case, please rotate it and install it on the passenger side.
Because it is installed behind the seat, it is difficult to take a drink from the driver's seat even with this product attached.
Package
Size (Approx.):
Size (Approx.):
181x104x222 mm
Package
Weight (Approx.):
Weight (Approx.):
520 g
3,065 JPY (Including Tax)
Stock :
2
Scheduled Shipping:
2026-04-09
Quantity :
Reference Price from Other Stores
