CARMATE Car Mount Smartphone Holder Dashboard Mount Carbon-Style H123×W88×D88(mm) DZ519
JAN
4973007437185
ASIN
B07PC5BXV6
Maker
Model No.
DZ519
Color
Size
Description
Carmate - Car Mount - Smartphone Holder - Dashboard - DZ519 Product Introduction
▪️Carbon-Style Black Edition Series
The Carmate Black Edition Series features a sporty carbon-look design, increasingly popular in vehicle interiors.
In addition, two shades of black are available, allowing you to enjoy different expressions even with a single color.
Installing this product creates a sporty, luxurious interior space.
▪️Black Edition Series Suction Cup Smartphone Holder
This smartphone holder from the Black Edition Series attaches with a powerful suction cup.
Attach the plate to your car's dashboard or other surface with the suction cup.
▪️Compatible with a Wide Range of Smartphones
The holder's size and weight are compatible with a wide range of smartphones. It can hold smartphones even with a case as long as they fit within the supported size.
*Stabilizing a secure hold may be impossible if the holder is equipped with a drop prevention ring or depending on the shape of the case.
*Smartphones with side buttons or functions may not function properly when held. (The arm that contacts the smartphone is approximately 35mm high.)
▪️Hybrid Gel Suction Cup with Two Features
This gel suction cup combines heat-resistant, durable elastomer resin with adhesive polyurethane resin for superior suction and durability. Suction power decreases when the suction cup surface becomes dirty, but rinsing with water will restore it. After rinsing, allow the suction cup surface to dry completely before reattaching.
This product requires the included plate to be attached with adhesive tape, and the suction cup is then attached to it.
A flat surface with a diameter of 80mm or more is required to attach the plate. It cannot be attached to surfaces facing downward, with sharp curves, flocked or fabric surfaces, or surfaces with large irregularities.
Do not attach this product to window glass.
Do not attach to genuine leather, synthetic leather, or dashboards with soft surfaces (see representative vehicle models). Doing so may damage the mounting surface or leave marks. *Representative vehicle models with dashboards that cannot be mounted (as of September 2021): Toyota: CH-R, RAV4 (April 2019 onwards), Crown series, Harrier; Subaru: Forester (July 2018 onwards); Mazda: All models; Lexus: All models; Imported vehicles: All models. *Easy one-handed quick hold. First, adjust the holder arm to fit your smartphone's width, and then you can easily hold it with one hand. Simply place your smartphone against the inside of the arm and push it in, and the spring will hold it in place. Additionally, the design releases the hold by simply pulling the held smartphone toward you, making removal effortless and hassle-free. *If the hold feels weak, try adjusting the width setting one step tighter. *Using a smartphone cover made of soft material may make it difficult to remove your smartphone from the holder.
▪️ Smartphone-Friendly Materials
The left and right arms that come into contact with your smartphone are made of elastomer resin, which combines a rubbery texture with high durability. This prevents rattling and scratches while riding. It also prevents vibration noise caused by contact between the smartphone and the holder.
▪️Can hold your smartphone while charging
The left and right arms hold your smartphone, so you can hold and charge smartphones with charging ports at the bottom.
Note: If the charging port is located on the side, charging may not be possible while holding the smartphone. (The maximum contact length between the left and right arms is approximately 35 mm.)
▪️Ball Joint with a Wide Adjustment Range
The ball joint connecting the base and holder allows for free angle adjustment (up to 50°) up, down, left, and right. The ball joint is screw-type, so once you've determined the orientation of the holder, you can tighten the screw to secure it in place. To change the orientation, simply loosen the screw and adjust it as many times as you like.
▪️Features a sporty carbon-look design. This product features a sporty carbon-look design, a trend increasingly seen in vehicle interiors. Installing this product will enhance your vehicle's interior.
▪️Before You Purchase: ・Compatible with smartphones 55-88mm wide and weighing up to 220g. *If a case is attached, the width and weight including the case must be within the compatible range. *Depending on the case shape or the device's anti-drop ring, it may not be possible to securely hold the device. *Even if the device is large enough to hold, it may interfere with the volume control or power buttons depending on the model, whether or not the case is attached, and the case shape. ・This product uses the included plate attached with adhesive tape and a suction cup. *A flat surface with a diameter of 80mm or more is required to attach the plate. *Cannot be attached to surfaces facing downward, on sharply curved surfaces, on flocked or fabric surfaces, or on surfaces with large irregularities.・Do not install on genuine leather, synthetic leather, or dashboards with soft surfaces (see representative vehicle models). This may damage the installation surface or leave installation marks. ・Representative vehicle models that cannot be installed on dashboards (as of September 2021): ・Toyota: CH-R, RAV4 (April 2019 onwards), Crown series, Harrier ・Subaru: Forester (July 2018 onwards) ・Mazda: All models ・Lexus: All models ・Imported vehicles: All models
▪️Caution: Please read carefully ・Operating a smartphone or other device while driving is prohibited by law. Please stop the vehicle in a safe place before operating a smartphone or other device. ・Do not install on the windshield or driver's or passenger's side windows, as this is a violation of the Road Transport Vehicle Safety Standards. ・Do not install in a location that may interfere with the deployment of the airbag or interfere with driving. ・Before use, always check that this product and your smartphone or other device are securely attached. There is a risk of the device falling off. Do not use during strenuous driving or on rough roads. Do not leave your smartphone in the car. Precautions for Use: Compatible with smartphones. Brand: CARMATE This smartphone holder allows you to easily hold your smartphone with one hand. First, adjust the arm to fit the width of your smartphone, and then hold it easily. This product uses a gel suction cup that combines a highly heat-resistant elastomer resin with a highly adhesive polyurethane resin. It adheres strongly to the dashboard. The arm that directly touches the smartphone is made of elastomer resin, which has a rubbery texture and high durability. It prevents rattling and scratches while driving. The left and right arms hold your smartphone, so you can charge it while holding it. The base and holder are connected with a ball joint. The angle can be freely adjusted up, down, left, and right. Compatible with various vehicle types: 4973007437185 CARMATE Car Mount, Smartphone Holder, Dashboard Mount, Carbon Fiber Style, H123 x W88 x D88 (mm), DZ519 (text created at , 2025-05-11)
▪️Carbon-Style Black Edition Series
The Carmate Black Edition Series features a sporty carbon-look design, increasingly popular in vehicle interiors.
In addition, two shades of black are available, allowing you to enjoy different expressions even with a single color.
Installing this product creates a sporty, luxurious interior space.
▪️Black Edition Series Suction Cup Smartphone Holder
This smartphone holder from the Black Edition Series attaches with a powerful suction cup.
Attach the plate to your car's dashboard or other surface with the suction cup.
▪️Compatible with a Wide Range of Smartphones
The holder's size and weight are compatible with a wide range of smartphones. It can hold smartphones even with a case as long as they fit within the supported size.
*Stabilizing a secure hold may be impossible if the holder is equipped with a drop prevention ring or depending on the shape of the case.
*Smartphones with side buttons or functions may not function properly when held. (The arm that contacts the smartphone is approximately 35mm high.)
▪️Hybrid Gel Suction Cup with Two Features
This gel suction cup combines heat-resistant, durable elastomer resin with adhesive polyurethane resin for superior suction and durability. Suction power decreases when the suction cup surface becomes dirty, but rinsing with water will restore it. After rinsing, allow the suction cup surface to dry completely before reattaching.
This product requires the included plate to be attached with adhesive tape, and the suction cup is then attached to it.
A flat surface with a diameter of 80mm or more is required to attach the plate. It cannot be attached to surfaces facing downward, with sharp curves, flocked or fabric surfaces, or surfaces with large irregularities.
Do not attach this product to window glass.
Do not attach to genuine leather, synthetic leather, or dashboards with soft surfaces (see representative vehicle models). Doing so may damage the mounting surface or leave marks. *Representative vehicle models with dashboards that cannot be mounted (as of September 2021): Toyota: CH-R, RAV4 (April 2019 onwards), Crown series, Harrier; Subaru: Forester (July 2018 onwards); Mazda: All models; Lexus: All models; Imported vehicles: All models. *Easy one-handed quick hold. First, adjust the holder arm to fit your smartphone's width, and then you can easily hold it with one hand. Simply place your smartphone against the inside of the arm and push it in, and the spring will hold it in place. Additionally, the design releases the hold by simply pulling the held smartphone toward you, making removal effortless and hassle-free. *If the hold feels weak, try adjusting the width setting one step tighter. *Using a smartphone cover made of soft material may make it difficult to remove your smartphone from the holder.
▪️ Smartphone-Friendly Materials
The left and right arms that come into contact with your smartphone are made of elastomer resin, which combines a rubbery texture with high durability. This prevents rattling and scratches while riding. It also prevents vibration noise caused by contact between the smartphone and the holder.
▪️Can hold your smartphone while charging
The left and right arms hold your smartphone, so you can hold and charge smartphones with charging ports at the bottom.
Note: If the charging port is located on the side, charging may not be possible while holding the smartphone. (The maximum contact length between the left and right arms is approximately 35 mm.)
▪️Ball Joint with a Wide Adjustment Range
The ball joint connecting the base and holder allows for free angle adjustment (up to 50°) up, down, left, and right. The ball joint is screw-type, so once you've determined the orientation of the holder, you can tighten the screw to secure it in place. To change the orientation, simply loosen the screw and adjust it as many times as you like.
▪️Features a sporty carbon-look design. This product features a sporty carbon-look design, a trend increasingly seen in vehicle interiors. Installing this product will enhance your vehicle's interior.
▪️Before You Purchase: ・Compatible with smartphones 55-88mm wide and weighing up to 220g. *If a case is attached, the width and weight including the case must be within the compatible range. *Depending on the case shape or the device's anti-drop ring, it may not be possible to securely hold the device. *Even if the device is large enough to hold, it may interfere with the volume control or power buttons depending on the model, whether or not the case is attached, and the case shape. ・This product uses the included plate attached with adhesive tape and a suction cup. *A flat surface with a diameter of 80mm or more is required to attach the plate. *Cannot be attached to surfaces facing downward, on sharply curved surfaces, on flocked or fabric surfaces, or on surfaces with large irregularities.・Do not install on genuine leather, synthetic leather, or dashboards with soft surfaces (see representative vehicle models). This may damage the installation surface or leave installation marks. ・Representative vehicle models that cannot be installed on dashboards (as of September 2021): ・Toyota: CH-R, RAV4 (April 2019 onwards), Crown series, Harrier ・Subaru: Forester (July 2018 onwards) ・Mazda: All models ・Lexus: All models ・Imported vehicles: All models
▪️Caution: Please read carefully ・Operating a smartphone or other device while driving is prohibited by law. Please stop the vehicle in a safe place before operating a smartphone or other device. ・Do not install on the windshield or driver's or passenger's side windows, as this is a violation of the Road Transport Vehicle Safety Standards. ・Do not install in a location that may interfere with the deployment of the airbag or interfere with driving. ・Before use, always check that this product and your smartphone or other device are securely attached. There is a risk of the device falling off. Do not use during strenuous driving or on rough roads. Do not leave your smartphone in the car. Precautions for Use: Compatible with smartphones. Brand: CARMATE This smartphone holder allows you to easily hold your smartphone with one hand. First, adjust the arm to fit the width of your smartphone, and then hold it easily. This product uses a gel suction cup that combines a highly heat-resistant elastomer resin with a highly adhesive polyurethane resin. It adheres strongly to the dashboard. The arm that directly touches the smartphone is made of elastomer resin, which has a rubbery texture and high durability. It prevents rattling and scratches while driving. The left and right arms hold your smartphone, so you can charge it while holding it. The base and holder are connected with a ball joint. The angle can be freely adjusted up, down, left, and right. Compatible with various vehicle types: 4973007437185 CARMATE Car Mount, Smartphone Holder, Dashboard Mount, Carbon Fiber Style, H123 x W88 x D88 (mm), DZ519 (text created at , 2025-05-11)
Package
Size (Approx.):
Size (Approx.):
165x96x197 mm
Package
Weight (Approx.):
Weight (Approx.):
240 g
2,350 JPY (Including Tax)
Stock :
1
Scheduled Shipping:
2026-06-30
Quantity :
Reference Price from Other Stores
