CARMATE Car Mount Smartphone Holder for Suzuki Jimny (JB64)/Jimny Sierra (JB74) - 360° Rotation NZ824
JAN
4973007512745
ASIN
B09YQSRK3R
Maker
Model No.
NZ824
Color
Size
Description
Carmate - Car Mount - Smartphone Holder - Jimny Sierra - NZ824
▪️Designed specifically for the Jimny (JB64) and Jimny Sierra (JB74). This smartphone holder replaces the factory panel located above the center air conditioning unit on the Jimny (JB64) and Jimny Sierra (JB74). Its custom design ensures a seamless fit and seamless installation.
▪️Sophisticated, Custom Design. Because it's specifically designed for the Jimny, the base is made of a color-matched resin instead of the typical black resin. The base surface is treated to match the Jimny's interior, achieving a genuine-looking finish. The base and holder are secured with an M8 bolt, allowing for easy removal if necessary. The holder can also be attached to either the driver's or passenger's side nuts. A 6mm hex wrench is required for removal. A hex wrench is not included.
▪️Compatible with a variety of smartphones. It can hold smartphones even with a case attached, as long as they are within the allowable size. *Depending on the shape of the case, whether it's a wallet-style case or the shape of the drop prevention ring, or the installation location, it may not be possible to securely hold the smartphone. *Smartphones with side buttons or functions may not be usable when held. (The height of the parts where the left and right arms contact the smartphone is approximately 30 mm.) *Various adjustment functions for convenient positioning and orientation. A. The smartphone can be rotated approximately 80° up, down, left, and right. B. A ball joint structure is used to hold the smartphone in either portrait or landscape orientation. The smartphone can be rotated 360°. C. The holder can be rotated 360° (in 10° increments) for convenient positioning. D. The mounting base has two built-in nuts, so the holder can be attached to either the left or right nut. The default setting is to attach the holder to the nut on the left (passenger seat) side. *A 6mm hex wrench is required to adjust C/D. A hex wrench is not included.
▪️Non-Slip Cushion Material
The parts that come into contact with your smartphone are made of soft elastomer resin, providing a gentle texture that's gentle on your smartphone. Its smooth, non-slip texture is highly durable and has no rubber odor. It's a plastic that's also used in OEM vehicle parts and non-metallic tire chains.
▪️Dedicated for a Perfect Installation
The same clips as the original equipment ensure a perfect fit on the Jimny's dashboard.
In addition, since it simply replaces the original panel, it won't scratch or leave marks.
▪️Included Charging Cable Hook
The holder has a hook for attaching the charging cord. It's compatible with cables with a diameter of 3-4 mm.
Note: Thin or flat cables may not be properly secured.
▪️Includes a tool for removing the original panel (estimated installation time: 3 minutes).
A tool for removing the panel (interior trim) required for installation is included. Simply remove the factory panel and replace it with this product, following the instructions in the instruction manual. If you're an experienced installer, the installation process can be completed in about one minute, and even if you're not, it will only take about five minutes. *Installation time is an estimate. Installation Method (Overview) Installation Location: Above the center air conditioner/below the navigation system. Installation Method: (Please be sure to read the instruction manual before installation.) 1. Remove the factory panel. Insert the included tool from the underside of the panel between the panel and the instrument panel. Use the inserted part as a fulcrum and pull the tool toward you to release the clips, allowing you to remove the panel. 2. Install this product in the location where you removed the factory panel. (Be careful not to insert it in the wrong direction. When you remove the product from the package, insert the holder part so that it is on the passenger seat side.)
▪️Contents
・Base part / Holder part
(The holder part is packed attached to the base part.)
・Accessories: Panel (interior trim) remover
▪️Main specifications
・Compatible smartphone dimensions: Width 64mm - 84mm Thickness: 14mm or less
・Compatible smartphone weight: 250g or less
・Ball joint diameter: 20mm
▪️Representative compatible models
■Apple
・
▪️Designed specifically for the Jimny (JB64) and Jimny Sierra (JB74). This smartphone holder replaces the factory panel located above the center air conditioning unit on the Jimny (JB64) and Jimny Sierra (JB74). Its custom design ensures a seamless fit and seamless installation.
▪️Sophisticated, Custom Design. Because it's specifically designed for the Jimny, the base is made of a color-matched resin instead of the typical black resin. The base surface is treated to match the Jimny's interior, achieving a genuine-looking finish. The base and holder are secured with an M8 bolt, allowing for easy removal if necessary. The holder can also be attached to either the driver's or passenger's side nuts. A 6mm hex wrench is required for removal. A hex wrench is not included.
▪️Compatible with a variety of smartphones. It can hold smartphones even with a case attached, as long as they are within the allowable size. *Depending on the shape of the case, whether it's a wallet-style case or the shape of the drop prevention ring, or the installation location, it may not be possible to securely hold the smartphone. *Smartphones with side buttons or functions may not be usable when held. (The height of the parts where the left and right arms contact the smartphone is approximately 30 mm.) *Various adjustment functions for convenient positioning and orientation. A. The smartphone can be rotated approximately 80° up, down, left, and right. B. A ball joint structure is used to hold the smartphone in either portrait or landscape orientation. The smartphone can be rotated 360°. C. The holder can be rotated 360° (in 10° increments) for convenient positioning. D. The mounting base has two built-in nuts, so the holder can be attached to either the left or right nut. The default setting is to attach the holder to the nut on the left (passenger seat) side. *A 6mm hex wrench is required to adjust C/D. A hex wrench is not included.
▪️Non-Slip Cushion Material
The parts that come into contact with your smartphone are made of soft elastomer resin, providing a gentle texture that's gentle on your smartphone. Its smooth, non-slip texture is highly durable and has no rubber odor. It's a plastic that's also used in OEM vehicle parts and non-metallic tire chains.
▪️Dedicated for a Perfect Installation
The same clips as the original equipment ensure a perfect fit on the Jimny's dashboard.
In addition, since it simply replaces the original panel, it won't scratch or leave marks.
▪️Included Charging Cable Hook
The holder has a hook for attaching the charging cord. It's compatible with cables with a diameter of 3-4 mm.
Note: Thin or flat cables may not be properly secured.
▪️Includes a tool for removing the original panel (estimated installation time: 3 minutes).
A tool for removing the panel (interior trim) required for installation is included. Simply remove the factory panel and replace it with this product, following the instructions in the instruction manual. If you're an experienced installer, the installation process can be completed in about one minute, and even if you're not, it will only take about five minutes. *Installation time is an estimate. Installation Method (Overview) Installation Location: Above the center air conditioner/below the navigation system. Installation Method: (Please be sure to read the instruction manual before installation.) 1. Remove the factory panel. Insert the included tool from the underside of the panel between the panel and the instrument panel. Use the inserted part as a fulcrum and pull the tool toward you to release the clips, allowing you to remove the panel. 2. Install this product in the location where you removed the factory panel. (Be careful not to insert it in the wrong direction. When you remove the product from the package, insert the holder part so that it is on the passenger seat side.)
▪️Contents
・Base part / Holder part
(The holder part is packed attached to the base part.)
・Accessories: Panel (interior trim) remover
▪️Main specifications
・Compatible smartphone dimensions: Width 64mm - 84mm Thickness: 14mm or less
・Compatible smartphone weight: 250g or less
・Ball joint diameter: 20mm
▪️Representative compatible models
■Apple
・
Package
Size (Approx.):
Size (Approx.):
177x46x272 mm
Package
Weight (Approx.):
Weight (Approx.):
300 g
3,057 JPY (Including Tax)
Stock :
5
Scheduled Shipping:
2026-06-30
Quantity :
Reference Price from Other Stores
