GSI Creos Mr. Color Gold (Gold) Metallic 10ml Model Paint C9
JAN
4973028716085
ASIN
B0BXP5D43D
Manufacturer
Model Number
Color
Size
Description
GSI Creos - Mr. Color - Metallic - Model Paint - C9
Product Introduction
GSI Creos “Mr. Color Gold (Gold) Metallic 10ml” is a model paint. Mr. Color has been the standard in model paints for over 40 years since its release. It is highly regarded by modelers worldwide. 【 Product Features 】 ・Offers a wide range of colors, suitable for painting numerous model genres including characters, scale models (tanks, aircraft, ships), and more. ・Uses a broad spectrum of pigments and metallic particles, resulting in superior color development compared to water-based paints (especially metallic and blue-based paints). ・Being a solvent-based paint, it dries quickly. ・The dried paint film is hard, achieving a beautiful glossy finish. ・The resin used provides a substantial feel (thickness) and forms an optimal coating film. 【 Dilution and Coating Layers 】 ・When painting with Mr. Color, it must be thinned appropriately using Mr. Color Thinner. Mr. Color Thinner can also be used to clean brushes and airbrushes used with Mr. Color. ・Compared to water-based paints, the paint viscosity is higher. When applying by brush, if the paint is difficult to apply, add Mr. Color Thinner. (Guideline: Paint : Thinner = 1 : up to 1) Additionally, mixing in a few drops of the dedicated Mr. Retarder Mild will slow drying speed and reduce brush streaks. ・For airbrush application, dilute the paint according to its viscosity, using a ratio of approximately 1 part paint to up to 2 parts thinner as a guideline. When using an airbrush, do not apply all at once. Limit the first coat to a light overall application, then apply thin layers in two or three separate passes. ・For gloss-based Mr. Color paints, adjust gloss level using C30 Flat Base. For a semi-gloss finish, mix in approximately 5-10% Flat Base. Mixing 10-20% Flat Base with the paint will produce a matte finish. Adjusting the Flat Base ratio allows for various gloss levels. Caution: ・This paint contains organic solvents. Ensure adequate ventilation during and after use. ・Do not mix with other model paints besides Mr. Color or Mr. Color GX. ※When applied to ABS resin parts, the paint may penetrate the resin, causing the part to become brittle and potentially crack. Carefully check the assembly instructions and part runner markings, and avoid painting “ABS resin parts”. Capacity: 10ml Safety Warning Not applicable
Safety Warning
Keep away from fire
Brand Name: GSI Creos
Capacity: 10ml
When painting with Mr. Color, it must be thinned appropriately with Mr. Color Thinner.
For airbrush painting, dilute the paint according to its viscosity, using a ratio of approximately 1 part paint to 2 parts thinner maximum.
Do not mix with other model paints besides Mr. Color and Mr. Color GX.
When applied to ABS resin parts, the paint may penetrate the resin, causing the part to become brittle and potentially crack.
4973028716085
GSI Creos Mr. Color Gold (Gold) Metallic 10ml Model Paint C9
(text created at , 2025-05-10)
Product Introduction
GSI Creos “Mr. Color Gold (Gold) Metallic 10ml” is a model paint. Mr. Color has been the standard in model paints for over 40 years since its release. It is highly regarded by modelers worldwide. 【 Product Features 】 ・Offers a wide range of colors, suitable for painting numerous model genres including characters, scale models (tanks, aircraft, ships), and more. ・Uses a broad spectrum of pigments and metallic particles, resulting in superior color development compared to water-based paints (especially metallic and blue-based paints). ・Being a solvent-based paint, it dries quickly. ・The dried paint film is hard, achieving a beautiful glossy finish. ・The resin used provides a substantial feel (thickness) and forms an optimal coating film. 【 Dilution and Coating Layers 】 ・When painting with Mr. Color, it must be thinned appropriately using Mr. Color Thinner. Mr. Color Thinner can also be used to clean brushes and airbrushes used with Mr. Color. ・Compared to water-based paints, the paint viscosity is higher. When applying by brush, if the paint is difficult to apply, add Mr. Color Thinner. (Guideline: Paint : Thinner = 1 : up to 1) Additionally, mixing in a few drops of the dedicated Mr. Retarder Mild will slow drying speed and reduce brush streaks. ・For airbrush application, dilute the paint according to its viscosity, using a ratio of approximately 1 part paint to up to 2 parts thinner as a guideline. When using an airbrush, do not apply all at once. Limit the first coat to a light overall application, then apply thin layers in two or three separate passes.
Safety Warning
Keep away from fire
Brand Name: GSI Creos
Capacity: 10ml
When painting with Mr. Color, it must be thinned appropriately with Mr. Color Thinner.
For airbrush painting, dilute the paint according to its viscosity, using a ratio of approximately 1 part paint to 2 parts thinner maximum.
Do not mix with other model paints besides Mr. Color and Mr. Color GX.
When applied to ABS resin parts, the paint may penetrate the resin, causing the part to become brittle and potentially crack.
4973028716085
GSI Creos Mr. Color Gold (Gold) Metallic 10ml Model Paint C9
(text created at , 2025-05-10)
Package
Size (Approx.):
Size (Approx.):
32x32x42 mm
Package
Weight (Approx.):
Weight (Approx.):
50 g
170 JPY (Including Tax)
Stock :
131
Scheduled Shipping:
2025-12-03
Quantity :
Reference Price from Other Stores
