GSI Creos Mr. Color RLM70 Black Green Semi-Gloss 10ml Model Paint C18

4973028716177

B0CH7QW2HV

GSI Creos Mr. Color RLM70 Black Green Model Paint - C18 Product Introduction: GSI Creos "Mr. Color RLM70 Black Green Semi-Gloss 10ml" model paint. Mr. Color has been the standard for model paints for over 40 years, earning high praise from modelers worldwide. <Product Features> - A wide range of colors is available, covering a wide range of model genres, including character and scale models (tanks, airplanes, ships). - A wide range of pigments and metallic particles are available, many of which offer better color development than water-based paints (especially metallic and blue paints). - Solvent-based paint dries quickly. - A hard, glossy finish is achieved after drying. - The resin used has a thick build, providing optimal film formation. <Dilution and Number of Coats> - When painting with Mr. Color, it is necessary to dilute it appropriately with Mr. Color Thinner. Mr. Color Thinner can also be used to clean brushes and airbrushes used with Mr. Color. Compared to water-based paints, the viscosity of the paint is higher. If brush application is difficult, add Mr. Color Thinner. (As a guideline, paint:thinner = approximately 1:1). Adding a few drops of the dedicated Mr. Retarder Mild will slow the drying speed and reduce uneven brush strokes. When airbrushing, dilute the paint according to its viscosity, aiming for a ratio of 1 part paint to 2 parts thinner. When using an airbrush, do not apply it all at once. Instead, apply a light coat over the entire area the first time, then apply two or three thin coats. <How to adjust from gloss to semi-gloss/matte> Gloss-based Mr. Colors can be adjusted to the desired gloss level using C30 Flat Base. For a semi-gloss finish, mix 5-10% Flat Base into the paint. For a matte finish, mix 10-20% Flat Base into the paint. By adjusting the flat base ratio, you can achieve various gloss levels. Caution: This paint contains organic solvents. Ventilate the area well during and after use. Cannot be mixed with other model paints other than Mr. Color and Mr. Color GX. When applying this paint to ABS resin parts, the paint may penetrate the resin, causing the parts to become brittle and crack. Carefully read the assembly instructions and part runner labels, and avoid painting ABS resin parts. This product is a hobby paint. Please prepare tools separately. This product does not include any other items (adhesive, tools, batteries, etc.). Capacity: 10ml Safety Warning: No open flames. Safety Warning: This paint contains organic solvents. Ventilate the area well during and after use. Cannot be mixed with other model paints other than Mr. Color and Mr. Color GX. When applying this paint to ABS resin parts, the paint may penetrate the resin, causing the parts to become brittle and crack. Please carefully read the assembly instructions and part runner labels and avoid painting ABS resin parts. Brand: GSI Creos. Material: Unisex. Paint Capacity: 10ml. When painting with Mr. Color, thin it appropriately with Mr. Color thinner. For airbrush painting, dilute it according to the paint's viscosity, aiming for a ratio of 1 part paint to 2 parts thinner. Do not mix with other model paints other than Mr. Color and Mr. Color GX. Painting ABS resin parts may cause the paint to penetrate the resin, making the parts brittle and potentially cracking. 4973028716177 GSI Creos Mr. Color RLM70 Black Green Semi-Gloss 10ml Model Paint C18 (text created at , 2025-05-10)

32x31x39 mm

50 g