GSI Creos Mr. Color Dark Green (2) Semi-Gloss 10ml Model Paint C23
JAN
4973028716221
ASIN
B0CH7RBK5K
Maker
Model No.
Color
Size
Description
GSI Creos - Mr. Color - Dark Green - Model Paint - C23
Product Introduction
GSI Creos “Mr. Color Dark Green (2) Semi-Gloss 10ml” is a model paint. Mr. Color has been the standard in model paints for over 40 years since its release. It is highly regarded by modelers around the world. ・With a wide range of colors, it can be used for painting numerous model genres, such as characters and scale models (tanks, airplanes, ships). ・It can use a wide range of pigments and metallic particles, and many colors have better color development than water-based paints (especially metallic and blue paints). ・As it is a solvent-based paint, it dries quickly. ・The dried paint film is hard, achieving a beautiful glossy finish. ・The resin used provides a substantial feel (thickness) and forms an optimal paint film. 【 Dilution and Coating Layers 】 ・When painting with Mr. Color, it must be thinned appropriately using Mr. Color Thinner. Mr. Color Thinner can also be used to clean brushes and airbrushes used with Mr. Color. ・Compared to water-based paints, the viscosity is higher. If brush application is difficult, add Mr. Color Thinner. (Guideline: Paint : Thinner = 1 : up to 1) Additionally, mixing a few drops of the dedicated Mr. Retarder Mild reduces drying speed and minimizes brush streaks. ・For airbrush painting, dilute the paint according to its viscosity, using a ratio of approximately 1 part paint to 2 parts thinner maximum. When using an airbrush, do not apply all at once. Limit the first pass to a light overall coat, then apply thin layers in two or three subsequent passes. 【 Adjusting from Gloss to Semi-Gloss/Matte 】 ・For gloss-type Mr. Color paints, adjust the gloss level using C30 Flat Base. For a semi-gloss finish, mix in about 5-10% Flat Base with the paint. Mixing in about 10-20% Flat Base will produce a matte finish. Adjusting the Flat Base ratio allows you to achieve various gloss levels. Caution: ・This paint contains organic solvents. Ensure adequate ventilation during and after use. ・Cannot be mixed with other model paints besides Mr. Color and Mr. Color GX. ※When applied to ABS resin parts, the paint may penetrate the resin, causing the part to become brittle and potentially crack. Carefully check assembly instructions and part runner markings; avoid painting “ABS resin parts”. ※This product is hobby paint. Tools, etc., must be prepared separately. ※This product does not include other items (adhesives, tools, batteries, etc.).
Capacity: 10ml
Safety Warning: Keep away from fire.
Brand Name: GSI Creos
When painting with Mr. Color, it is necessary to dilute it appropriately with Mr. Color thinner.
When airbrushing, dilute the paint according to its viscosity, using a ratio of approximately 1 part paint to 2 parts thinner.
This product cannot be mixed with other model paints other than Mr. Color and Mr. Color GX.
When painted on ABS resin parts, the paint may penetrate the resin, causing the parts to become brittle and crack.
4973028716221
GSI Creos Mr. Color Dark Green (2) Semi-Gloss 10ml Model Paint C23
(text created at , 2025-05-10)
Product Introduction
GSI Creos “Mr. Color Dark Green (2) Semi-Gloss 10ml” is a model paint. Mr. Color has been the standard in model paints for over 40 years since its release. It is highly regarded by modelers around the world.
Capacity: 10ml
Safety Warning: Keep away from fire.
Brand Name: GSI Creos
When painting with Mr. Color, it is necessary to dilute it appropriately with Mr. Color thinner.
When airbrushing, dilute the paint according to its viscosity, using a ratio of approximately 1 part paint to 2 parts thinner.
This product cannot be mixed with other model paints other than Mr. Color and Mr. Color GX.
When painted on ABS resin parts, the paint may penetrate the resin, causing the parts to become brittle and crack.
4973028716221
GSI Creos Mr. Color Dark Green (2) Semi-Gloss 10ml Model Paint C23
(text created at , 2025-05-10)
Package
Size (Approx.):
Size (Approx.):
35x35x40 mm
Package
Weight (Approx.):
Weight (Approx.):
100 g
170 JPY (Including Tax)
Stock :
27
Scheduled Shipping:
2026-02-17
Quantity :
Reference Price from Other Stores
