GSI Creos Mr. Color Wood Brown Semi-Gloss 10ml Model Paint C43
JAN
4973028716412
ASIN
B0C1BQ1T3L
Maker
Model No.
Color
Size
Description
GSI Creos - Mr. Color - Wood Brown - Model Paint - C43
Product Introduction
GSI Creos “Mr. Color Wood Brown Semi-Gloss 10ml” is a model paint. Mr. Color has been the standard in model paints for over 40 years since its release. It is highly regarded by modelers worldwide. 【 Product Features 】 ・Offers a wide range of colors, suitable for painting numerous model genres including characters, scale models (tanks, aircraft, ships), etc. ・Can utilize a broad spectrum of pigments and metallic particles, often providing better color development than water-based paints (especially metallic and blue-based paints). ・Being a solvent-based paint, it dries quickly. ・The dried paint film is hard, allowing for a beautiful glossy finish. ・The resin used provides a substantial feel (thickness) and forms an optimal coating film. 【 Dilution and Coating Layers 】 ・When painting with Mr. Color, it must be thinned appropriately using Mr. Color Thinner. Mr. Color Thinner can also be used to clean brushes and airbrushes used with Mr. Color. ・Compared to water-based paints, the paint viscosity is higher. When applying by brush, if the paint is difficult to apply, add Mr. Color Thinner. (Guideline: Paint : Thinner = 1 : up to 1) Additionally, mixing in a few drops of the dedicated Mr. Retarder Mild will slow drying speed and reduce brush streaks. ・For airbrush application, dilute the paint according to its viscosity, using a ratio of approximately 1 part paint to up to 2 parts thinner as a guideline. When using an airbrush, do not apply all at once. Limit the first coat to a light overall application, then apply thin layers in two or three separate coats. ・For gloss-based Mr. Color paints, adjust gloss level using C30 Flat Base. For a semi-gloss finish, mix in approximately 5-10% Flat Base. Mixing 10-20% Flat Base with the paint will produce a matte finish. Adjusting the Flat Base ratio allows for various gloss levels. Caution: ・This paint contains organic solvents. Ensure adequate ventilation during and after use. ・Do not mix with other model paints besides Mr. Color or Mr. Color GX. ※When applied to ABS resin parts, the paint may penetrate the resin, causing the part to become brittle and potentially crack. Carefully check the assembly instructions and part runner markings, and avoid painting “ABS resin parts”. Capacity: 10ml Safety Warning Keep away from fire
Safety Warning
Keep away from fire
Brand Name: GSI Creos
Capacity: 10ml
When painting with Mr. Color, it must be thinned appropriately with Mr. Color Thinner.
For airbrush painting, dilute the paint according to its viscosity, using a ratio of approximately 1 part paint to a maximum of 2 parts thinner.
Do not mix with other model paints besides Mr. Color and Mr. Color GX.
When applied to ABS resin parts, the paint may penetrate the resin, causing the part to become brittle and prone to cracking.
4973028716412
GSI Creos Mr. Color Wood Brown Semi-Gloss 10ml Model Paint C43
(text created at , 2025-05-10)
Product Introduction
GSI Creos “Mr. Color Wood Brown Semi-Gloss 10ml” is a model paint. Mr. Color has been the standard in model paints for over 40 years since its release. It is highly regarded by modelers worldwide. 【 Product Features 】 ・Offers a wide range of colors, suitable for painting numerous model genres including characters, scale models (tanks, aircraft, ships), etc. ・Can utilize a broad spectrum of pigments and metallic particles, often providing better color development than water-based paints (especially metallic and blue-based paints). ・Being a solvent-based paint, it dries quickly. ・The dried paint film is hard, allowing for a beautiful glossy finish. ・The resin used provides a substantial feel (thickness) and forms an optimal coating film. 【 Dilution and Coating Layers 】 ・When painting with Mr. Color, it must be thinned appropriately using Mr. Color Thinner. Mr. Color Thinner can also be used to clean brushes and airbrushes used with Mr. Color. ・Compared to water-based paints, the paint viscosity is higher. When applying by brush, if the paint is difficult to apply, add Mr. Color Thinner. (Guideline: Paint : Thinner = 1 : up to 1) Additionally, mixing in a few drops of the dedicated Mr. Retarder Mild will slow drying speed and reduce brush streaks. ・For airbrush application, dilute the paint according to its viscosity, using a ratio of approximately 1 part paint to up to 2 parts thinner as a guideline. When using an airbrush, do not apply all at once. Limit the first coat to a light overall application, then apply thin layers in two or three separate coats.
Safety Warning
Keep away from fire
Brand Name: GSI Creos
Capacity: 10ml
When painting with Mr. Color, it must be thinned appropriately with Mr. Color Thinner.
For airbrush painting, dilute the paint according to its viscosity, using a ratio of approximately 1 part paint to a maximum of 2 parts thinner.
Do not mix with other model paints besides Mr. Color and Mr. Color GX.
When applied to ABS resin parts, the paint may penetrate the resin, causing the part to become brittle and prone to cracking.
4973028716412
GSI Creos Mr. Color Wood Brown Semi-Gloss 10ml Model Paint C43
(text created at , 2025-05-10)
Package
Size (Approx.):
Size (Approx.):
33x31x39 mm
Package
Weight (Approx.):
Weight (Approx.):
50 g
170 JPY (Including Tax)
Stock :
12
Scheduled Shipping:
2026-02-12
Quantity :
Reference Price from Other Stores
