GSI Creos Mr. Color Character Fresh (2) Semi-Gloss 10ml Model Paint C112
JAN
4973028716900
ASIN
B0C6JQ7BHJ
Manufacturer
Model Number
Color
Size
Description
GSI Creos - Mr. Color - Character Fresh - Model Paint - C112
Product Introduction
GSI Creos “Mr. Color Character Fresh (2) Semi-Gloss 10ml” is a model paint. Mr. Color has been the standard in model paints for over 40 years since its release. It is highly regarded by modelers worldwide. 【 Product Features 】 ・Offers a wide range of colors, suitable for painting numerous model genres including characters, scale models (tanks, aircraft, ships), etc. ・Uses a broad spectrum of pigments and metallic particles, resulting in better color development than many water-based paints (especially metallic and blue-based paints). ・Being a solvent-based paint, it dries quickly. ・The dried paint film is hard, achieving a beautiful glossy finish. ・The resin used provides a substantial feel (thickness) and forms an optimal paint film. 【 Dilution and Coating Layers 】 ・When painting with Mr. Color, it must be thinned appropriately using Mr. Color Thinner. Mr. Color Thinner can also be used to clean brushes and airbrushes used with Mr. Color. ・Compared to water-based paints, the viscosity is higher. If brush application is difficult, add Mr. Color Thinner. (Guideline: Paint : Thinner = 1 : up to 1) Additionally, mixing a few drops of the dedicated Mr. Retarder Mild slows drying speed and reduces brush streaks. ・For airbrush painting, dilute the paint according to its viscosity, using a ratio of approximately 1 part paint to 2 parts thinner maximum. When using an airbrush, do not apply all at once. Limit the first pass to a light overall coat, then apply thin layers in two or three separate passes. 【 Adjusting from Gloss to Semi-Gloss/Matte 】 ・For gloss-type Mr. Color, adjust the gloss level using C30 Flat Base. For a semi-gloss finish, mix in about 5-10% Flat Base with the paint. Mixing in about 10-20% Flat Base will produce a matte finish. Adjusting the Flat Base ratio allows you to achieve various gloss levels. Caution: ・This paint contains organic solvents. Ensure good ventilation during and after use. ・Cannot be mixed with other model paints besides Mr. Color and Mr. Color GX. ※When applied to ABS resin parts, the paint may penetrate the resin, causing the part to become brittle and potentially crack. Carefully check assembly instructions and part runner markings; avoid painting “ABS resin parts”. ※This product is hobby paint. Tools, etc., must be prepared separately. ※This product does not include any other items (adhesives, paints, tools, batteries, etc.).
Capacity: 10ml
Safety Warning: Keep away from fire.
Brand Name: GSI Creos
When painting with Mr. Color, it is necessary to dilute it appropriately with Mr. Color thinner.
For airbrush application, dilute the paint to a viscosity suitable for spraying, using a ratio of approximately 1 part paint to 2 parts thinner maximum.
This product cannot be mixed with other model paints besides Mr. Color and Mr. Color GX.
When applied to ABS resin parts, the paint may penetrate the resin, causing the part to become brittle and prone to cracking.
4973028716900
GSI Creos Mr.Color Character Fresh (2) Semi-Gloss 10ml Model Paint C112
(text created at , 2025-05-10)
Product Introduction
GSI Creos “Mr. Color Character Fresh (2) Semi-Gloss 10ml” is a model paint. Mr. Color has been the standard in model paints for over 40 years since its release. It is highly regarded by modelers worldwide. 【 Product Features 】 ・Offers a wide range of colors, suitable for painting numerous model genres including characters, scale models (tanks, aircraft, ships), etc. ・Uses a broad spectrum of pigments and metallic particles, resulting in better color development than many water-based paints (especially metallic and blue-based paints). ・Being a solvent-based paint, it dries quickly. ・The dried paint film is hard, achieving a beautiful glossy finish. ・The resin used provides a substantial feel (thickness) and forms an optimal paint film. 【 Dilution and Coating Layers 】 ・When painting with Mr. Color, it must be thinned appropriately using Mr. Color Thinner. Mr. Color Thinner can also be used to clean brushes and airbrushes used with Mr. Color. ・Compared to water-based paints, the viscosity is higher. If brush application is difficult, add Mr. Color Thinner. (Guideline: Paint : Thinner = 1 : up to 1) Additionally, mixing a few drops of the dedicated Mr. Retarder Mild slows drying speed and reduces brush streaks. ・For airbrush painting, dilute the paint according to its viscosity, using a ratio of approximately 1 part paint to 2 parts thinner maximum. When using an airbrush, do not apply all at once. Limit the first pass to a light overall coat, then apply thin layers in two or three separate passes. 【 Adjusting from Gloss to Semi-Gloss/Matte 】 ・For gloss-type Mr. Color, adjust the gloss level using C30 Flat Base. For a semi-gloss finish, mix in about 5-10% Flat Base with the paint. Mixing in about 10-20% Flat Base will produce a matte finish. Adjusting the Flat Base ratio allows you to achieve various gloss levels. Caution: ・This paint contains organic solvents. Ensure good ventilation during and after use. ・Cannot be mixed with other model paints besides Mr. Color and Mr. Color GX. ※When applied to ABS resin parts, the paint may penetrate the resin, causing the part to become brittle and potentially crack. Carefully check assembly instructions and part runner markings; avoid painting “ABS resin parts”. ※This product is hobby paint. Tools, etc., must be prepared separately. ※This product does not include any other items (adhesives, paints, tools, batteries, etc.).
Capacity: 10ml
Safety Warning: Keep away from fire.
Brand Name: GSI Creos
When painting with Mr. Color, it is necessary to dilute it appropriately with Mr. Color thinner.
For airbrush application, dilute the paint to a viscosity suitable for spraying, using a ratio of approximately 1 part paint to 2 parts thinner maximum.
This product cannot be mixed with other model paints besides Mr. Color and Mr. Color GX.
When applied to ABS resin parts, the paint may penetrate the resin, causing the part to become brittle and prone to cracking.
4973028716900
GSI Creos Mr.Color Character Fresh (2) Semi-Gloss 10ml Model Paint C112
(text created at , 2025-05-10)
Package
Size (Approx.):
Size (Approx.):
33x31x42 mm
Package
Weight (Approx.):
Weight (Approx.):
50 g
170 Yen (Including Tax)
Stock :
34
Scheduled Shipping:
2025-11-27
Quantity :
Reference Price from Other Stores
