GSI Creos Mr. Color RLM65 Light Blue Semi-Gloss 10ml Model Paint C115

4973028716931

B0CB5LJSZF

GSI Creos Mr. Color RLM65 Light Blue Model Paint - C115 Product Introduction
GSI Creos "Mr. Color RLM65 Light Blue Semi-Gloss 10ml" is a hobby paint.
Mr. Color has been the standard for model paints for over 40 years.
It has earned high praise from modelers worldwide.
<Product Features>
- A wide range of colors is available, covering a wide range of model genres, including character and scale models (tanks, airplanes, ships).
- A wide range of pigments and metallic particles are available, many of which offer better color development than water-based paints (especially metallic and blue paints).
- A solvent-based paint that dries quickly.
- A hard, glossy finish is achieved after drying.
- The resin used has a thick, textured finish, creating an optimal coating. <About Dilution and Number of Coats> - When painting with Mr. Color, you need to thin it appropriately with Mr. Color Thinner. Mr. Color Thinner can also be used to clean brushes and airbrushes used with Mr. Color. - Compared to water-based paints, the viscosity of the paint is higher. If you are having difficulty applying with a brush, try adding Mr. Color Thinner. (As a guideline, paint:thinner = approximately 1:1.) - Also, adding a few drops of the dedicated Mr. Retarder Mild will slow the drying speed and reduce uneven brush strokes. - When painting with an airbrush, dilute the paint according to its viscosity, aiming for a ratio of 1 part paint to 2 parts thinner. When using an airbrush, do not apply it all at once. Instead, apply a light coat over the entire area the first time, then apply two or three thin coats. - How to Adjust from Gloss to Semi-Gloss/Matte Finishes - Gloss-type Mr. Colors can be adjusted to their desired gloss using the C30 Flat Base. For a semi-gloss finish, mix 5-10% Flat Base into the paint. Alternatively, mix 10-20% Flat Base into the paint for a matte finish. Adjust the amount of Flat Base to achieve various gloss levels. Caution: This paint contains organic solvents. Ventilate the room well during and after use. Cannot be mixed with other model paints other than Mr. Color and Mr. Color GX. Painting ABS resin parts may cause the paint to penetrate the resin, making the parts brittle and potentially cracking. Carefully read the assembly instructions and part runner labels, and avoid painting ABS resin parts. This product is for hobby use only. Tools and other accessories are required. This product does not include adhesives, paints, tools, batteries, or other items. Capacity: 10ml Safety Warning: No open flames Brand Name: GSI Creos Capacity: 10ml When painting with Mr. Color, you must thin it appropriately with Mr. Color thinner. For airbrush painting, dilute the paint according to the paint's viscosity, aiming for a ratio of 1 part paint to a maximum of 2 parts thinner. This paint cannot be mixed with other model paints other than Mr. Color and Mr. Color GX. When painting ABS resin parts, the paint may penetrate the resin, making the parts brittle and potentially cracking. 4973028716931 GSI Creos GSI Creos Mr. Color RLM65 Light Blue Semi-Gloss 10ml Model Paint C115 (text created at , 2025-05-10)

32x31x42 mm

50 g