GSI Creos Mr. Color RLM83 Dark Green Semi-Gloss 10ml Model Paint C123

4973028717013

B0C6JPM81F

GSI Creos Mr. Color RLM83 Dark Green Model Paint - C123 Product Introduction: GSI Creos "Mr. Color RLM83 Dark Green Semi-Gloss 10ml" is a hobby paint. Mr. Color has been the standard for model paints for over 40 years. It has earned high praise from modelers worldwide. Product Features: A wide range of colors are available, covering a wide range of model genres, including character and scale models (tanks, airplanes, ships). A wide range of pigments and metallic particles are available, many of which offer better color development than water-based paints (especially metallic and blue paints). This solvent-based paint dries quickly. The dry film is hard, resulting in a beautiful glossy finish. The resin used has a thick, body-like texture, creating an optimal film formation. <About Dilution and Number of Coats> - When painting with Mr. Color, you need to thin it appropriately with Mr. Color Thinner. Mr. Color Thinner can also be used to clean brushes and airbrushes used with Mr. Color. - Compared to water-based paints, the viscosity of the paint is higher. If you are having difficulty applying with a brush, try adding Mr. Color Thinner. (As a guideline, paint:thinner = approximately 1:1.) - Also, adding a few drops of the dedicated Mr. Retarder Mild will slow the drying speed and reduce uneven brush strokes. - When painting with an airbrush, dilute the paint according to its viscosity, aiming for a ratio of 1 part paint to 2 parts thinner. When using an airbrush, do not apply it all at once. Instead, apply a light coat over the entire area the first time, then apply two or three thin coats. - How to Adjust from Gloss to Semi-Gloss/Matte Finishes - Gloss-type Mr. Colors can be adjusted to their desired gloss using the C30 Flat Base. For a semi-gloss finish, mix 5-10% Flat Base into the paint. Alternatively, mix 10-20% Flat Base into the paint for a matte finish. Adjust the amount of Flat Base to achieve various gloss levels. Caution: This paint contains organic solvents. Ventilate the room well during and after use. Cannot be mixed with other model paints other than Mr. Color and Mr. Color GX. Painting ABS resin parts may cause the paint to penetrate the resin, making the parts brittle and potentially cracking. Carefully read the assembly instructions and part runner labels, and avoid painting ABS resin parts. This product is for hobby use only. Tools and other accessories are required. This product does not include adhesives, paints, tools, batteries, or other items. Capacity: 10ml Safety Warning: No open flames Brand Name: GSI Creos Capacity: 10ml When painting with Mr. Color, you must thin it appropriately with Mr. Color thinner. For airbrush painting, dilute the paint according to the paint's viscosity, aiming for a ratio of 1 part paint to a maximum of 2 parts thinner. Do not mix with other model paints other than Mr. Color and Mr. Color GX. When painting ABS resin parts, the paint may penetrate the resin, making the parts brittle and potentially cracking. 4973028717013 GSI Creos GSI Creos Mr. Color RLM83 Dark Green Semi-Gloss 10ml Model Paint C123 (text created at , 2025-05-10)

33x32x42 mm

50 g