GSI Creos Mr. Color Casing Color Semi-Gloss 10ml Model Paint C125
JAN
4973028717037
ASIN
B0CH7Q3ZGR
Maker
Model No.
Color
Size
Description
GSI Creos - Mr. Color - Cowling Color - Model Paint - C125
Product Introduction
GSI Creos “Mr. Color Cowling Color Semi-Gloss 10ml” Hobby Paint.
Mr. Color has been the standard in model paints for over 40 years since its release.
It is highly regarded by modelers worldwide. ・Offers a wide range of colors, suitable for painting numerous model genres including characters, scale models (tanks, aircraft, ships), and more. ・Utilizes a broad spectrum of pigments and metallic particles, often providing better color development than water-based paints. (Especially metallic and blue-based paints)
・Being solvent-based, it dries quickly.
・The dried paint film is hard, achieving a beautiful glossy finish.
・The resin used provides a substantial feel (thickness), forming an optimal paint film. ・When painting with Mr. Color, dilute appropriately using Mr. Color Thinner. Mr. Color Thinner can also be used to clean brushes and airbrushes after use. ・Compared to water-based paints, the viscosity is higher. If brush application is difficult, add Mr. Color Thinner. (Guideline: Paint : Thinner = 1 : up to 1) Additionally, mixing in a few drops of the dedicated Mr. Retarder Mild will slow drying speed and reduce brush streaks. ・For airbrush painting, dilute according to the paint's viscosity, using a guideline ratio of 1 part paint to up to 2 parts thinner. When using an airbrush, do not apply all at once. Limit the first coat to a light overall application, then apply thin layers in two or three separate coats.
・For gloss-based Mr. Color, adjust gloss level using C30 Flat Base. For a semi-gloss finish, mix in 5-10% Flat Base by volume. Mixing in 10-20% Flat Base by volume will produce a matte finish. Adjusting the Flat Base ratio allows for various gloss levels. Caution: ・This paint contains organic solvents. Ensure adequate ventilation during and after use. ・This paint cannot be mixed with other model paints besides Mr. Color and Mr. Color GX. ※When applied to ABS resin parts, the paint may penetrate the resin, causing the part to become brittle and potentially crack. Please carefully check assembly instructions and part runner markings, and avoid painting “ABS resin parts”.
※This product is a hobby paint. Please prepare tools separately.
※This product does not include any other items (adhesives, paints, tools, batteries, etc.).
Capacity: 10ml
Safety Warning
Keep away from fire
Brand Name: GSI Creos
When painting with Mr. Color, it must be thinned appropriately using Mr. Color Thinner.
For airbrush painting, dilute the paint according to its viscosity, using a ratio of approximately 1 part paint to 2 parts thinner maximum.
Do not mix with other model paints besides Mr. Color or Mr. Color GX.
When applied to ABS resin parts, the paint may penetrate the resin, causing the part to become brittle and potentially crack.
4973028717037
GSI Creos Mr. Color Cowling Color Semi-Gloss 10ml Model Paint C125
(text created at , 2025-05-10)
Product Introduction
GSI Creos “Mr. Color Cowling Color Semi-Gloss 10ml” Hobby Paint.
Mr. Color has been the standard in model paints for over 40 years since its release.
It is highly regarded by modelers worldwide.
・Being solvent-based, it dries quickly.
・The dried paint film is hard, achieving a beautiful glossy finish.
・The resin used provides a substantial feel (thickness), forming an optimal paint film.
・For gloss-based Mr. Color, adjust gloss level using C30 Flat Base. For a semi-gloss finish, mix in 5-10% Flat Base by volume. Mixing in 10-20% Flat Base by volume will produce a matte finish. Adjusting the Flat Base ratio allows for various gloss levels. Caution: ・This paint contains organic solvents. Ensure adequate ventilation during and after use. ・This paint cannot be mixed with other model paints besides Mr. Color and Mr. Color GX. ※When applied to ABS resin parts, the paint may penetrate the resin, causing the part to become brittle and potentially crack. Please carefully check assembly instructions and part runner markings, and avoid painting “ABS resin parts”.
※This product is a hobby paint. Please prepare tools separately.
※This product does not include any other items (adhesives, paints, tools, batteries, etc.).
Capacity: 10ml
Safety Warning
Keep away from fire
Brand Name: GSI Creos
When painting with Mr. Color, it must be thinned appropriately using Mr. Color Thinner.
For airbrush painting, dilute the paint according to its viscosity, using a ratio of approximately 1 part paint to 2 parts thinner maximum.
Do not mix with other model paints besides Mr. Color or Mr. Color GX.
When applied to ABS resin parts, the paint may penetrate the resin, causing the part to become brittle and potentially crack.
4973028717037
GSI Creos Mr. Color Cowling Color Semi-Gloss 10ml Model Paint C125
(text created at , 2025-05-10)
Package
Size (Approx.):
Size (Approx.):
33x32x42 mm
Package
Weight (Approx.):
Weight (Approx.):
50 g
170 JPY (Including Tax)
Stock :
30
Scheduled Shipping:
2026-02-26
Quantity :
Reference Price from Other Stores
