GSI Creos Mr. Color Aircraft Model Paint Blue FS15050 Gloss 10ml Model Paint C328
JAN
4973028717563
ASIN
B0BXNZPYSB
Manufacturer
Model Number
Color
Size
Description
GSI Creos - Mr. Color - Aircraft Model Color - Blue FS15050 - C328
Product Description
GSI Creos “Mr. Color Aircraft Model Paint Blue FS15050 Gloss 10ml” is a model paint.
This is a series of special colors for aircraft.
C351~385 are individual colors from the special color set.
【 About Dilution and Coating Layers 】
・When painting with Mr. Color, it must be thinned appropriately using Mr. Color Thinner. Mr. Color Thinner can also be used to clean brushes and airbrushes after using Mr. Color.
・Compared to water-based paints, the viscosity is higher. If brush application is difficult, add Mr. Color Thinner. (Guideline: Paint : Thinner = 1 : up to 1) Additionally, mixing in a few drops of the dedicated Mr. Retarder Mild will slow drying speed and reduce brush streaks. ・For airbrush painting, dilute according to the paint's viscosity, using a guideline ratio of 1 part paint to up to 2 parts thinner. When using an airbrush, do not apply all at once. Limit the first coat to a light overall application, then apply thin layers in two or three separate coats.
・For gloss-based Mr. Color, adjust gloss level using C30 Flat Base. For a semi-gloss finish, mix in 5-10% Flat Base by volume. Mixing in 10-20% Flat Base by volume will produce a matte finish. Adjusting the Flat Base ratio allows for various gloss levels. Caution: ・This paint contains organic solvents. Ensure adequate ventilation during and after use. ・Cannot be mixed with other model paints besides Mr. Color and Mr. Color GX. ※When applied to ABS resin parts, the paint may penetrate the resin, causing the part to become brittle and potentially crack. Please carefully check assembly instructions and part runner markings, and avoid painting “ABS resin parts”.
Capacity: 10ml
Safety Warning
Brand Name: GSI Creos
When painting with Mr. Color, it is necessary to thin appropriately with Mr. Color Thinner.
For airbrush application, dilute the paint to a viscosity suitable for spraying, using a ratio of approximately 1 part paint to 2 parts thinner maximum.
Do not mix with other model paints besides Mr. Color or Mr. Color GX.
Painting ABS resin parts may cause the paint to penetrate the resin, making the parts brittle and prone to cracking.
4973028717563
GSI Creos Mr. Color Aircraft Model Color Blue FS15050 Gloss 10ml Model Paint C328
(text created at , 2025-05-10)
Product Description
GSI Creos “Mr. Color Aircraft Model Paint Blue FS15050 Gloss 10ml” is a model paint.
This is a series of special colors for aircraft.
C351~385 are individual colors from the special color set.
【 About Dilution and Coating Layers 】
・When painting with Mr. Color, it must be thinned appropriately using Mr. Color Thinner. Mr. Color Thinner can also be used to clean brushes and airbrushes after using Mr. Color.
・Compared to water-based paints, the viscosity is higher. If brush application is difficult, add Mr. Color Thinner. (Guideline: Paint : Thinner = 1 : up to 1) Additionally, mixing in a few drops of the dedicated Mr. Retarder Mild will slow drying speed and reduce brush streaks. ・For airbrush painting, dilute according to the paint's viscosity, using a guideline ratio of 1 part paint to up to 2 parts thinner. When using an airbrush, do not apply all at once. Limit the first coat to a light overall application, then apply thin layers in two or three separate coats.
・For gloss-based Mr. Color, adjust gloss level using C30 Flat Base. For a semi-gloss finish, mix in 5-10% Flat Base by volume. Mixing in 10-20% Flat Base by volume will produce a matte finish. Adjusting the Flat Base ratio allows for various gloss levels. Caution: ・This paint contains organic solvents. Ensure adequate ventilation during and after use. ・Cannot be mixed with other model paints besides Mr. Color and Mr. Color GX. ※When applied to ABS resin parts, the paint may penetrate the resin, causing the part to become brittle and potentially crack. Please carefully check assembly instructions and part runner markings, and avoid painting “ABS resin parts”.
Capacity: 10ml
Safety Warning
Brand Name: GSI Creos
When painting with Mr. Color, it is necessary to thin appropriately with Mr. Color Thinner.
For airbrush application, dilute the paint to a viscosity suitable for spraying, using a ratio of approximately 1 part paint to 2 parts thinner maximum.
Do not mix with other model paints besides Mr. Color or Mr. Color GX.
Painting ABS resin parts may cause the paint to penetrate the resin, making the parts brittle and prone to cracking.
4973028717563
GSI Creos Mr. Color Aircraft Model Color Blue FS15050 Gloss 10ml Model Paint C328
(text created at , 2025-05-10)
Package
Size (Approx.):
Size (Approx.):
33x31x39 mm
Package
Weight (Approx.):
Weight (Approx.):
50 g
170 JPY (Including Tax)
Stock :
12
Scheduled Shipping:
2025-12-03
Quantity :
Reference Price from Other Stores
Similar Products
GSI Creos Mr. Color Aircraft Model Paint Olive Drab FS34087 Semi-Gloss 10ml Model Paint C304
170 JPY
GSI Creos Mr. Color Aircraft Model Paint Light Gray FS36495 Semi-Gloss 10ml Model Paint C338
170 JPY