GSI Creos Mr. Color AFV/Tank Model Special Color Army Khaki 3/4 Matte 10ml Model Paint C527
JAN
4973028718065
ASIN
B0BWR4F6J3
Manufacturer
Model Number
Color
Size
Description
GSI Creos - Mr. Color - AFV/Tank Model Special Color - Army Khaki - C527
Product Description
GSI Creos “Mr. Color AFV/Tank Model Special Color Army Khaki 3/4 Matte 10ml” Hobby paint.
C511~515 are completely new colors. C516~530 are colors previously sold in color sets, now available individually with changed numbers.
【 About Dilution and Coating Layers 】
・When painting with Mr. Color, it is necessary to dilute appropriately using Mr. Color Thinner. Mr. Color Thinner can also be used to clean brushes and airbrushes used with Mr. Color.
・Compared to water-based paints, the paint viscosity is higher. If brush application is difficult, add Mr. Color Thinner. (Guideline: Paint : Thinner = 1 : up to 1) Additionally, mixing in a few drops of the dedicated Mr. Retarder Mild will slow drying speed and reduce brush streaks. ・For airbrush painting, dilute according to the paint's viscosity, using a guideline ratio of 1 part paint to up to 2 parts thinner. When using an airbrush, do not apply all at once. Limit the first coat to a light overall application, then apply thin layers in two or three separate coats.
・For gloss-based Mr. Color, adjust gloss level using C30 Flat Base. For a semi-gloss finish, mix in about 5-10% Flat Base with the paint. Mixing in about 10-20% Flat Base will produce a matte finish. Adjusting the Flat Base ratio allows you to achieve various gloss levels.
Caution:
・This paint contains organic solvents. Ensure good ventilation during and after use.
・Cannot be mixed with other model paints besides Mr. Color and Mr. Color GX.
※When applied to ABS resin parts, the paint may penetrate the resin, causing the part to become brittle and potentially crack. Carefully check the assembly instructions and part runner markings, and avoid painting “ABS resin parts”.
※This product is hobby paint. Please prepare tools separately.
※This product does not include any other items (adhesives, paints, tools, batteries, etc.).
Capacity: 10ml
Safety Warning
No open flames
Brand Name: GSI Creos
When painting with Mr. Color, it must be thinned appropriately with Mr. Color Thinner.
For airbrush application, dilute the paint to a viscosity suitable for spraying, using a ratio of approximately 1 part paint to 2 parts thinner maximum.
Do not mix with other model paints besides Mr. Color or Mr. Color GX.
When applied to ABS resin parts, the paint may penetrate the resin, causing the part to become brittle and prone to cracking.
4973028718065
GSI Creos Mr.Color AFV/Tank Model Special Color Army Khaki 3/4 Matte 10ml Model Paint C527
(text created at , 2025-05-10)
Product Description
GSI Creos “Mr. Color AFV/Tank Model Special Color Army Khaki 3/4 Matte 10ml” Hobby paint.
C511~515 are completely new colors. C516~530 are colors previously sold in color sets, now available individually with changed numbers.
【 About Dilution and Coating Layers 】
・When painting with Mr. Color, it is necessary to dilute appropriately using Mr. Color Thinner. Mr. Color Thinner can also be used to clean brushes and airbrushes used with Mr. Color.
・Compared to water-based paints, the paint viscosity is higher. If brush application is difficult, add Mr. Color Thinner. (Guideline: Paint : Thinner = 1 : up to 1) Additionally, mixing in a few drops of the dedicated Mr. Retarder Mild will slow drying speed and reduce brush streaks. ・For airbrush painting, dilute according to the paint's viscosity, using a guideline ratio of 1 part paint to up to 2 parts thinner. When using an airbrush, do not apply all at once. Limit the first coat to a light overall application, then apply thin layers in two or three separate coats.
・For gloss-based Mr. Color, adjust gloss level using C30 Flat Base. For a semi-gloss finish, mix in about 5-10% Flat Base with the paint. Mixing in about 10-20% Flat Base will produce a matte finish. Adjusting the Flat Base ratio allows you to achieve various gloss levels.
Caution:
・This paint contains organic solvents. Ensure good ventilation during and after use.
・Cannot be mixed with other model paints besides Mr. Color and Mr. Color GX.
※When applied to ABS resin parts, the paint may penetrate the resin, causing the part to become brittle and potentially crack. Carefully check the assembly instructions and part runner markings, and avoid painting “ABS resin parts”.
※This product is hobby paint. Please prepare tools separately.
※This product does not include any other items (adhesives, paints, tools, batteries, etc.).
Capacity: 10ml
Safety Warning
No open flames
Brand Name: GSI Creos
When painting with Mr. Color, it must be thinned appropriately with Mr. Color Thinner.
For airbrush application, dilute the paint to a viscosity suitable for spraying, using a ratio of approximately 1 part paint to 2 parts thinner maximum.
Do not mix with other model paints besides Mr. Color or Mr. Color GX.
When applied to ABS resin parts, the paint may penetrate the resin, causing the part to become brittle and prone to cracking.
4973028718065
GSI Creos Mr.Color AFV/Tank Model Special Color Army Khaki 3/4 Matte 10ml Model Paint C527
(text created at , 2025-05-10)
Package
Size (Approx.):
Size (Approx.):
33x31x39 mm
Package
Weight (Approx.):
Weight (Approx.):
50 g
170 JPY (Including Tax)
Stock :
32
Scheduled Shipping:
2025-12-03
Quantity :
Reference Price from Other Stores
