GSI Creos Acrylon Color Black Iron Metallic 10ml Model Paint N18
JAN
4973028927139
ASIN
B0C1JNXHK6
Maker
Model No.
Color
Size
Description
GSI Creos - Acrylon Color - Metallic - Model Paint - N18
Product Introduction
GSI Creos “Acrylon Color Black Iron Metallic 10ml” Model paint.
Acryjon is a new generation water-based emulsion paint designed to improve safety and painting environments by solving issues like slow drying times, weak paint films, and odors from organic solvents.
・After drying, it forms a water-resistant, solvent-resistant paint film.
・Achieves an ultra-low odor model paint by minimizing the use of organic solvents.
・Despite being water-based, it dries quickly for high workability.
・Includes gloss finishes, previously difficult with conventional water-based emulsion paints.
・The dried coating film exhibits a certain degree of flexibility.
・Being low-solvent, it is less likely to corrode thin, solvent-sensitive ABS molded parts.
・Unlike solvent-based paints that dissolve and adhere to plastic resin, this paint adheres through its own adhesion strength. It can be applied without primer even to highly solvent-resistant materials like urethane resin. Can also be applied to polycarbonate. However, performance improves with proper surface preparation, including primer application, for better adhesion.
・For brush application, use undiluted. If application is difficult, add 1-2 drops of water or Acrylon Retarder (recommended). Be cautious: excessive dilution causes pigment to run, leading to uneven color on the painted surface.
・For airbrush application, use Acrylon Airbrush Thinner (dilution ratio approx. 1:0.3). When diluting with water, add it gradually and apply with the air pressure set as low as possible. Note that adding too much water may cause the paint to be repelled from the surface.
Brand Name: GSI Creos
Capacity: 10ml
A new generation emulsion-based water-based paint designed to solve odor issues caused by organic solvents, aiming for safety and improved painting environments.
Brushes, airbrushes, and other tools used for painting can be cleaned with water before drying.
Can be applied over Mr. Color and enamel paints. (Cannot be used over water-based hobby colors or other manufacturers' water-based acrylic paints as cracking may occur)
Cannot be mixed with water-based hobby colors or Mr. Color
4973028927139
GSI Creos Acryjon Color Black Iron Metallic 10ml Model Paint N18
(text created at , 2025-05-10)
Product Introduction
GSI Creos “Acrylon Color Black Iron Metallic 10ml” Model paint.
Acryjon is a new generation water-based emulsion paint designed to improve safety and painting environments by solving issues like slow drying times, weak paint films, and odors from organic solvents.
・After drying, it forms a water-resistant, solvent-resistant paint film.
・Achieves an ultra-low odor model paint by minimizing the use of organic solvents.
・Despite being water-based, it dries quickly for high workability.
・Includes gloss finishes, previously difficult with conventional water-based emulsion paints.
・The dried coating film exhibits a certain degree of flexibility.
・Being low-solvent, it is less likely to corrode thin, solvent-sensitive ABS molded parts.
・Unlike solvent-based paints that dissolve and adhere to plastic resin, this paint adheres through its own adhesion strength. It can be applied without primer even to highly solvent-resistant materials like urethane resin. Can also be applied to polycarbonate. However, performance improves with proper surface preparation, including primer application, for better adhesion.
・For brush application, use undiluted. If application is difficult, add 1-2 drops of water or Acrylon Retarder (recommended). Be cautious: excessive dilution causes pigment to run, leading to uneven color on the painted surface.
・For airbrush application, use Acrylon Airbrush Thinner (dilution ratio approx. 1:0.3). When diluting with water, add it gradually and apply with the air pressure set as low as possible. Note that adding too much water may cause the paint to be repelled from the surface.
Brand Name: GSI Creos
Capacity: 10ml
A new generation emulsion-based water-based paint designed to solve odor issues caused by organic solvents, aiming for safety and improved painting environments.
Brushes, airbrushes, and other tools used for painting can be cleaned with water before drying.
Can be applied over Mr. Color and enamel paints. (Cannot be used over water-based hobby colors or other manufacturers' water-based acrylic paints as cracking may occur)
Cannot be mixed with water-based hobby colors or Mr. Color
4973028927139
GSI Creos Acryjon Color Black Iron Metallic 10ml Model Paint N18
(text created at , 2025-05-10)
Package
Size (Approx.):
Size (Approx.):
32x31x42 mm
Package
Weight (Approx.):
Weight (Approx.):
40 g
170 JPY (Including Tax)
Stock :
24
Scheduled Shipping:
2026-02-12
Quantity :
Reference Price from Other Stores
