GSI Creos Acrylon Color Daytona Green Gloss 10ml Model Paint N26
JAN
4973028927214
ASIN
B0CCR37RBW
Maker
Model No.
Color
Size
Description
GSI Creos - Acrylon Color - Daytona Green - Model Paint - N26
Product Introduction
GSI Creos “Acrylon Color Daytona Green Gloss 10ml” This is a model paint.
Acrylon is a new generation water-based emulsion paint that aims to improve safety and the painting environment by solving problems such as slow drying time, weak paint film, and odor from organic solvents.
・After drying, it forms a water-resistant and solvent-resistant paint film.
・We have achieved an ultra-low odor model paint that minimizes the use of organic solvents.
・Despite being water-based, it dries quickly for high workability.
・Includes gloss finishes, previously difficult with conventional water-based emulsion paints.
・The dried coating film exhibits a certain degree of flexibility.
・Being low-solvent, it is less likely to corrode thin, solvent-sensitive ABS molded parts.
・Unlike solvent-based paints that dissolve and adhere to plastic resin, this paint adheres through its own adhesion strength. It can be applied without primer even to highly solvent-resistant materials like urethane resin. Can also be applied to polycarbonate. However, performance improves with proper surface preparation, including primer application, for better adhesion. • For brush application, use undiluted. If application is difficult, add 1-2 drops of water or Acrylon Retarder (recommended). Note: Over-thinning causes pigments to flow excessively, leading to uneven color on the painted surface.
・For airbrush application, use Acrylon Airbrush Thinner (revised formula). (Recommended dilution ratio: 1:0.3). When thinning with water, add it gradually and apply with the air pressure set as low as possible. Be careful not to add too much water, as it may cause the paint to be repelled from the surface. Brushes, airbrushes, and other tools used for painting can be cleaned with water before the paint dries. Once dry, the paint will not dissolve in water; use Acrylon Tool Cleaner for cleaning. *The top layer of clear coats or Acrylon may appear milky white, but it will become transparent after drying. *Can be painted over Mr. Color or enamel paints. Cannot be used over old label version water-based hobby colors or other manufacturers' water-based acrylic paints, as cracking will occur. ※ Cannot be mixed with water-based hobby colors or Mr. Color. ※ Once hardened or solidified, Acryjon cannot be re-dissolved. Additionally, if the paint or thinner becomes acidic due to high room temperature or other factors, the paint may solidify. ※This product is hobby paint. Please prepare tools separately. ※This package does not include items other than this product (adhesives, paints, tools, batteries, etc.). Capacity: 10ml Safety Warning Not applicable
Brand Name: GSI Creos
Capacity: 10ml
A new generation emulsion-based water-based paint designed to solve odor issues caused by organic solvents, aiming for safety and improved painting environments.
Brushes, airbrushes, and other tools used for painting can be cleaned with water before drying.
Can be painted over Mr. Color and enamel paints. (Cannot be used over water-based hobby colors or other companies' water-based acrylic paints as cracking will occur)
Cannot be mixed with water-based hobby colors or Mr. Color
4973028927214
GSI Creos Acrytion Color Daytona Green Gloss 10ml Model Paint N26
(text created at , 2025-05-10)
Product Introduction
GSI Creos “Acrylon Color Daytona Green Gloss 10ml” This is a model paint.
Acrylon is a new generation water-based emulsion paint that aims to improve safety and the painting environment by solving problems such as slow drying time, weak paint film, and odor from organic solvents.
・After drying, it forms a water-resistant and solvent-resistant paint film.
・We have achieved an ultra-low odor model paint that minimizes the use of organic solvents.
・Despite being water-based, it dries quickly for high workability.
・Includes gloss finishes, previously difficult with conventional water-based emulsion paints.
・The dried coating film exhibits a certain degree of flexibility.
・Being low-solvent, it is less likely to corrode thin, solvent-sensitive ABS molded parts.
・Unlike solvent-based paints that dissolve and adhere to plastic resin, this paint adheres through its own adhesion strength. It can be applied without primer even to highly solvent-resistant materials like urethane resin. Can also be applied to polycarbonate. However, performance improves with proper surface preparation, including primer application, for better adhesion. • For brush application, use undiluted. If application is difficult, add 1-2 drops of water or Acrylon Retarder (recommended). Note: Over-thinning causes pigments to flow excessively, leading to uneven color on the painted surface.
・For airbrush application, use Acrylon Airbrush Thinner (revised formula). (Recommended dilution ratio: 1:0.3). When thinning with water, add it gradually and apply with the air pressure set as low as possible. Be careful not to add too much water, as it may cause the paint to be repelled from the surface. Brushes, airbrushes, and other tools used for painting can be cleaned with water before the paint dries. Once dry, the paint will not dissolve in water; use Acrylon Tool Cleaner for cleaning. *The top layer of clear coats or Acrylon may appear milky white, but it will become transparent after drying. *Can be painted over Mr. Color or enamel paints. Cannot be used over old label version water-based hobby colors or other manufacturers' water-based acrylic paints, as cracking will occur. ※ Cannot be mixed with water-based hobby colors or Mr. Color. ※ Once hardened or solidified, Acryjon cannot be re-dissolved. Additionally, if the paint or thinner becomes acidic due to high room temperature or other factors, the paint may solidify. ※This product is hobby paint. Please prepare tools separately. ※This package does not include items other than this product (adhesives, paints, tools, batteries, etc.). Capacity: 10ml Safety Warning Not applicable
Brand Name: GSI Creos
Capacity: 10ml
A new generation emulsion-based water-based paint designed to solve odor issues caused by organic solvents, aiming for safety and improved painting environments.
Brushes, airbrushes, and other tools used for painting can be cleaned with water before drying.
Can be painted over Mr. Color and enamel paints. (Cannot be used over water-based hobby colors or other companies' water-based acrylic paints as cracking will occur)
Cannot be mixed with water-based hobby colors or Mr. Color
4973028927214
GSI Creos Acrytion Color Daytona Green Gloss 10ml Model Paint N26
(text created at , 2025-05-10)
Package
Size (Approx.):
Size (Approx.):
33x31x39 mm
Package
Weight (Approx.):
Weight (Approx.):
50 g
170 JPY (Including Tax)
Stock :
27
Scheduled Shipping:
2026-07-14
Quantity :
Reference Price from Other Stores
