GSI Creos Acrylon Color RLM74 Grey Green Semi-Gloss 10ml Model Paint N68
JAN
4973028927542
ASIN
B0CHB1V5KM
Maker
Model No.
Color
Size
Description
GSI Creos - Acrylon Color - RLM74 Grey Green - Model Paint - N68
Product Introduction
GSI Creos “Acrylon Color RLM74 Grey Green Semi-Gloss 10ml” This is a model paint.
Acrylon is a new generation water-based emulsion paint that aims to improve safety and the painting environment by solving problems such as slow drying time, weak paint film, and odor from organic solvents.
・After drying, it forms a water-resistant and solvent-resistant paint film.
・We have achieved an ultra-low odor model paint that minimizes the use of organic solvents.
・Despite being water-based, it dries quickly for high workability.
・Includes gloss finishes, previously difficult with conventional water-based emulsion paints.
・The dried coating film exhibits a certain degree of flexibility.
・Being low-solvent, it is less likely to corrode thin, solvent-sensitive ABS molded parts.
・Unlike solvent-based paints that dissolve and adhere to plastic resin, this paint adheres through its own adhesion strength. It can be applied without primer even to highly solvent-resistant materials like urethane resin. Can also be applied to polycarbonate. However, performance improves with proper surface preparation, including primer application, for better adhesion. • For brush application, use undiluted. If application is difficult, add 1-2 drops of water or Acrylon Retarder (recommended). Note: Over-thinning causes pigments to flow excessively, leading to uneven color on the painted surface.
・For airbrush application, use Acrylon Airbrush Thinner (revised formula). (Recommended dilution ratio: 1:0.3). When thinning with water, add it gradually and apply with the air pressure set as low as possible. Be careful not to add too much water, as it may cause the paint to be repelled from the surface. Brushes, airbrushes, and other tools used for painting can be cleaned with water before the paint dries. Once dry, the paint will not dissolve in water; use Acrylon Tool Cleaner for cleaning. *The top layer of clear coats or Acrylon may appear milky white, but it will become transparent after drying. *Can be painted over Mr. Color or enamel paints. Cannot be used over old label version water-based hobby colors or other manufacturers' water-based acrylic paints, as cracking will occur. ※ Cannot be mixed with water-based hobby colors or Mr. Color. ※ Once hardened or solidified, Acryjon cannot be re-dissolved. Additionally, if the paint or thinner becomes acidic due to high room temperature or other factors, the paint will solidify.
※This product is a hobby paint. Please prepare tools separately.
※This product does not include anything other than the paint itself (e.g., adhesives, tools, batteries).
Capacity: 10ml
Safety Warning
Brand Name: GSI Creos
A new generation of emulsion-based water-based paint that solves the problem of odor caused by organic solvents and aims to improve safety and the painting environment.
Tools such as brushes and airbrushes can be washed with water after painting, as long as they are not dry.
Can be painted over Mr. Color and enamel paints (cannot be used on water-based hobby colors or other companies' water-based acrylic paints as cracking will occur).
Cannot be mixed with water-based hobby colors or Mr. Color.
4973028927542
GSI Creos Acrylon Color RLM74 Grey Green Semi-Gloss 10ml Model Paint N68
(text created at , 2025-05-10)
Product Introduction
GSI Creos “Acrylon Color RLM74 Grey Green Semi-Gloss 10ml” This is a model paint.
Acrylon is a new generation water-based emulsion paint that aims to improve safety and the painting environment by solving problems such as slow drying time, weak paint film, and odor from organic solvents.
・After drying, it forms a water-resistant and solvent-resistant paint film.
・We have achieved an ultra-low odor model paint that minimizes the use of organic solvents.
・Despite being water-based, it dries quickly for high workability.
・Includes gloss finishes, previously difficult with conventional water-based emulsion paints.
・The dried coating film exhibits a certain degree of flexibility.
・Being low-solvent, it is less likely to corrode thin, solvent-sensitive ABS molded parts.
・Unlike solvent-based paints that dissolve and adhere to plastic resin, this paint adheres through its own adhesion strength. It can be applied without primer even to highly solvent-resistant materials like urethane resin. Can also be applied to polycarbonate. However, performance improves with proper surface preparation, including primer application, for better adhesion. • For brush application, use undiluted. If application is difficult, add 1-2 drops of water or Acrylon Retarder (recommended). Note: Over-thinning causes pigments to flow excessively, leading to uneven color on the painted surface.
・For airbrush application, use Acrylon Airbrush Thinner (revised formula). (Recommended dilution ratio: 1:0.3). When thinning with water, add it gradually and apply with the air pressure set as low as possible. Be careful not to add too much water, as it may cause the paint to be repelled from the surface. Brushes, airbrushes, and other tools used for painting can be cleaned with water before the paint dries. Once dry, the paint will not dissolve in water; use Acrylon Tool Cleaner for cleaning. *The top layer of clear coats or Acrylon may appear milky white, but it will become transparent after drying. *Can be painted over Mr. Color or enamel paints. Cannot be used over old label version water-based hobby colors or other manufacturers' water-based acrylic paints, as cracking will occur. ※ Cannot be mixed with water-based hobby colors or Mr. Color. ※ Once hardened or solidified, Acryjon cannot be re-dissolved. Additionally, if the paint or thinner becomes acidic due to high room temperature or other factors, the paint will solidify.
※This product is a hobby paint. Please prepare tools separately.
※This product does not include anything other than the paint itself (e.g., adhesives, tools, batteries).
Capacity: 10ml
Safety Warning
Brand Name: GSI Creos
A new generation of emulsion-based water-based paint that solves the problem of odor caused by organic solvents and aims to improve safety and the painting environment.
Tools such as brushes and airbrushes can be washed with water after painting, as long as they are not dry.
Can be painted over Mr. Color and enamel paints (cannot be used on water-based hobby colors or other companies' water-based acrylic paints as cracking will occur).
Cannot be mixed with water-based hobby colors or Mr. Color.
4973028927542
GSI Creos Acrylon Color RLM74 Grey Green Semi-Gloss 10ml Model Paint N68
(text created at , 2025-05-10)
Package
Size (Approx.):
Size (Approx.):
32x31x42 mm
Package
Weight (Approx.):
Weight (Approx.):
50 g
170 JPY (Including Tax)
Stock :
22
Scheduled Shipping:
2026-07-14
Quantity :
Reference Price from Other Stores
