High Heat Paint 300 Black
JAN
4978955112047
ASIN
B002CPQ3L6
Maker
Model No.
MH11204
Color
Size
Description
Holts High-Heat Paint MH11204 HTRC3 Product Description Withstands temperatures up to 600°C (1092°F). Suitable for heat-resistant applications such as car mufflers, stoves, incinerators, and chimneys. Offers excellent durability, minimal discoloration, and strong adhesion for a beautiful finish. Dries in 30-40 minutes after application (at 20°C/68°F). Usable approximately 1 hour after drying.\
\
Precautions\
*Do not use for purposes other than intended. * Keep out of reach of children and prevent tampering. * Contains organic solvents; prolonged inhalation of solvent fumes is harmful. Ensure adequate ventilation during application and drying, and continue ventilation until fumes dissipate. * Avoid storing in direct sunlight or inside vehicles. * When spraying, be mindful of wind direction to prevent contact with people. * When disposing, fully release the gas inside and separate from other trash. * If it comes into contact with skin, wash off with plenty of soap. If pain or changes in appearance occur, seek medical attention. *If you feel unwell after inhaling vapors or gas, rest in a well-ventilated area and seek medical attention.\
Safety Warning\
Do not inhale or ingest. Strictly prohibited in vehicles. Flammable and toxic. Improper handling may cause poisoning, fire, or can rupture. Exercise extreme caution. This is a flammable product using high-pressure gas. Due to its hazardous nature, observe the following precautions: ① Do not use near flames or open fire. ② Do not use large quantities indoors where open flames are present. ③ Do not place in direct sunlight or near open flames where temperatures may exceed 40°C (104°F), as high temperatures may cause explosion. ④ Do not place in fire. ⑤ Empty completely before disposal. High-Pressure Gas: DME. Flammable/Class 3 Petroleum Products, Hazard Class III/Synthetic Enamel Paint
Brand Name: Holts
Withstands temperatures up to 600°C (1112°F). Suitable for heat-resistant applications on car mufflers, stoves, incinerators, chimneys, etc. Offers excellent durability, minimal discoloration, and strong adhesion for a clean finish. Dries in 30-40 minutes after application (at 20°C). Usable approximately 1 hour after drying.
▪️ Country of Origin: Japan
▪️ Materials: Synthetic Resin (Silicone Resin), Pigments, Organic Solvent
▪️ Contents: 300ml
▪️ Heat Resistance: 600°C
▪️ Color: Black
▪️ Applications: Car and motorcycle mufflers, stoves, incinerators, chimneys, etc. Heat resistant up to 600°C. Baking hardens the coating, improving adhesion and durability. This silicone-based paint exhibits minimal discoloration during baking. Due to its properties, it loses some gloss after drying and heat curing. Suitable for car and motorcycle mufflers, stoves, incinerators, chimneys, etc.
▪️ Coverage: Approx. 1㎡ (2 coats)
4978955112047
B002CPQ3L6
High Heat Paint 300 Black
(text created at , 2025-10-09)
\
Precautions\
*Do not use for purposes other than intended. * Keep out of reach of children and prevent tampering. * Contains organic solvents; prolonged inhalation of solvent fumes is harmful. Ensure adequate ventilation during application and drying, and continue ventilation until fumes dissipate. * Avoid storing in direct sunlight or inside vehicles. * When spraying, be mindful of wind direction to prevent contact with people. * When disposing, fully release the gas inside and separate from other trash. * If it comes into contact with skin, wash off with plenty of soap. If pain or changes in appearance occur, seek medical attention. *If you feel unwell after inhaling vapors or gas, rest in a well-ventilated area and seek medical attention.\
Safety Warning\
Do not inhale or ingest. Strictly prohibited in vehicles. Flammable and toxic. Improper handling may cause poisoning, fire, or can rupture. Exercise extreme caution. This is a flammable product using high-pressure gas. Due to its hazardous nature, observe the following precautions: ① Do not use near flames or open fire. ② Do not use large quantities indoors where open flames are present. ③ Do not place in direct sunlight or near open flames where temperatures may exceed 40°C (104°F), as high temperatures may cause explosion. ④ Do not place in fire. ⑤ Empty completely before disposal. High-Pressure Gas: DME. Flammable/Class 3 Petroleum Products, Hazard Class III/Synthetic Enamel Paint
Brand Name: Holts
Withstands temperatures up to 600°C (1112°F). Suitable for heat-resistant applications on car mufflers, stoves, incinerators, chimneys, etc. Offers excellent durability, minimal discoloration, and strong adhesion for a clean finish. Dries in 30-40 minutes after application (at 20°C). Usable approximately 1 hour after drying.
▪️ Country of Origin: Japan
▪️ Materials: Synthetic Resin (Silicone Resin), Pigments, Organic Solvent
▪️ Contents: 300ml
▪️ Heat Resistance: 600°C
▪️ Color: Black
▪️ Applications: Car and motorcycle mufflers, stoves, incinerators, chimneys, etc. Heat resistant up to 600°C. Baking hardens the coating, improving adhesion and durability. This silicone-based paint exhibits minimal discoloration during baking. Due to its properties, it loses some gloss after drying and heat curing. Suitable for car and motorcycle mufflers, stoves, incinerators, chimneys, etc.
▪️ Coverage: Approx. 1㎡ (2 coats)
4978955112047
B002CPQ3L6
High Heat Paint 300 Black
(text created at , 2025-10-09)
Package
Size (Approx.):
Size (Approx.):
56x55x199 mm
Package
Weight (Approx.):
Weight (Approx.):
500 g
1,482 JPY (Including Tax)
Stock :
2
Scheduled Shipping:
2026-07-16
Quantity :
Reference Price from Other Stores
