Diamond Mesh ① High Density 1.1mm × 0.55mm (with keyhole for 1:24 scale car models)

4573322751944

B0CH9DZW1K

75194 MDF-151

Model Art - Diamond Mesh ① - High Density - 1.1mm × 0.55mm (with keyhole for 1/24 scale car models)

Diamond Mesh ① High Density 1.1mm × 0.55mm (with keyhole for 1:24 car models)
・This product is a universal etching part intended to enhance the precision of commercially available plastic models.
・It replicates the diamond mesh pattern found on car model air intake grilles and tank engine grilles.
・For adhesion, use commercially available instant adhesives or epoxy adhesives.
・For part trimming, use commercially available etching scissors.
・To achieve a high-precision finish, ensure the thickness is 1.1mm × 0.55mm.
・For adhesion, use commercially available instant adhesives or epoxy-based adhesives.
・Use commercially available etching scissors for trimming the parts.
・Composed of fine lines approximately 0.1mm thick to achieve precision.
・Small indentations are stamped in various places to create a simulated “woven mesh” appearance.
・The side with the “MODEL ART” logo engraving is the surface of this product.
・The “1:24 Car Model Keyhole” is a bonus part inspired by the keyholes found on some automobile door handles. Please verify the size fits or adjust it to fit before use. □Contents ・Diamond Mesh (1.1mm x 0.55mm) ・Keyhole (for 1:24 scale car models) Scheduled for release in early October 2023
Brand Name: Model Art
Etching Parts
4573322751944
Diamond Mesh ① High Density 1.1mm x 0.55mm (with Keyhole for 1:24 Car Models)
(text created at , 2025-05-09)

- mm

- g