Diamond Mesh ② Low Density 2.0mm × 1.15mm (Includes side emblem base for 1:24 BNR32)

4573322752071

B0CH9P53D1

75207 MDF-155

Model Art - Diamond Mesh ② - Low Density - 2-0mm × 1-15mm (Includes side emblem base for 1/24 BNR32)

Diamond Mesh ① High Density 1.1mm × 0.55mm (with keyhole for 1:24 car models)
・This product is a universal etching part intended to enhance the precision of commercially available plastic models.
・It is modeled after the diamond mesh often seen on car model air intake grilles or tank engine grille sections.
・For adhesion, use commercially available instant adhesives or epoxy-based adhesives.
・Use commercially available etching scissors for trimming the parts.
・Composed of fine lines approximately 0.1mm thick to achieve precision.
・Small indentations are stamped in various places to create a simulated “woven mesh” appearance.
・The side with the “MODEL ART” logo engraving is the surface of this product.
・The “1:24 Car Model Keyhole” is a bonus part inspired by the keyholes found on some car door handles. Please confirm the size fits or adjust it to fit before use.
□Contents
・Diamond Mesh (1.1mm x 0.55mm)
・Keyhole (for 1:24 Car Models)
Scheduled for release in early October 2023
Brand Name: Model Art
Material: Plastic
Etched Parts
4573322752071
Diamond Mesh ② Low Density 2.0mm x 1.15mm (Includes side emblem base for 1:24 BNR32)
(text created at , 2025-05-09)

- mm

- g