Johnson Mold Killer Easy-Shoot Jet Body 400g 1 Bottle
JAN
4901609016606
ASIN
B0DKTC6GGM
Maker
Model No.
4003440
Color
Size
Description
Mold Killer - Easy Continuous Spray Jet - 400ml - Mold Removal Cleaner - Mold Removal Spray
Product Introduction
▪️ First in Mold Killer history: Features a pressurized tank for uninterrupted continuous spraying.
▪️ Powerful penetrating formula reaches deep into mold roots, soaks in, and thoroughly removes mold.
▪️ Effectively removes even stubborn black mold from rubber seals.
▪️ Eliminates bacteria and germs that cause unpleasant odors (※1).
▪️ This mold remover with disinfecting power (※1) also cleans away persistent pink slime.
▪️Cleans every corner of your bathroom, from walls, floors, tile grout, chairs, shower hoses, bathtub lids, and other bathroom accessories.
▪️After use, the spray bottle can be refilled with the 400g or 650g refill packs.
▪️When storing, always keep upright; do not lay on its side. Read the usage instructions carefully before use. ※1 Does not eliminate all bacteria. Ingredients Sodium hypochlorite, Sodium hydroxide (0.5%), Surfactant (alkylamine oxide), Stabilizer Usage Instructions Usage Method/ ➀ Lift the nozzle stopper (translucent lever) upward to the “ON” position. ※Do not operate while facing your face.
② Spray directly onto mold stains from about 15 cm away. ※Do not spray above eye level. When using on high surfaces like walls or ceilings, apply the liquid using a sponge with a handle or similar tool.
③ After a few minutes, rinse thoroughly with water. ※ For severe mold stains, leaving it on for about 20-30 minutes is effective.
④ After use, lower the nozzle stopper all the way down to the “Stop” position and store upright in a cool, dark place. Always wash hands after use, then wash face and eyes. Usage Guidelines: Spray 8-10 times per square meter. Precautions: Do not use if feeling unwell or if you have heart disease, respiratory disorders, etc. Ensure ventilation by running exhaust fans, opening windows or doors. (Opening two or more is more effective).
Wear rubber gloves, a mask, and protective eyewear/goggles.
Do not use large amounts at once or continuously for long periods.
Never use while bathing.
Avoid getting liquid in your eyes.
Always use alone. Mixing with acidic products, vinegar, alcohol, ammonia, etc., can produce dangerous gases. Do not use for any purpose other than intended. Foreign-made tiles or unit baths may discolor; always test in an inconspicuous area first. If drips remain on the bathtub, discoloration may occur; rinse immediately with water. Avoid contact with clothing or rugs as it may cause fading. Do not transfer to other containers. Avoid dropping to prevent breakage. Keep out of reach of persons with dementia. Keep out of reach of children and pets. This spray bottle is for MOLD KILLER only. Do not add other detergents, bleaches, etc.
Use refill packs for subsequent uses. Be careful of splashing when refilling.
Mold deeply embedded in seals, coatings, etc., becomes harder to remove, so clean promptly.
Brand Name: Johnson
Mold Remover that Quickly Reaches Mold Roots
With unique powerful penetrating ingredients, it works on mold roots in just 5 minutes.
Achieves approximately half the number of sprays and spray time compared to our previous product.
Less hand fatigue makes cleaning large areas like walls and floors easier.
After use, the sprayer can be attached to the 400g or 650g refill bottles.
4901609016606
Johnson Mold Killer Easy Continuous Spray Jet Body 400g 1 Bottle
(text created at , 2025-05-10)
Product Introduction
▪️ First in Mold Killer history: Features a pressurized tank for uninterrupted continuous spraying.
▪️ Powerful penetrating formula reaches deep into mold roots, soaks in, and thoroughly removes mold.
▪️ Effectively removes even stubborn black mold from rubber seals.
▪️ Eliminates bacteria and germs that cause unpleasant odors (※1).
▪️ This mold remover with disinfecting power (※1) also cleans away persistent pink slime.
▪️Cleans every corner of your bathroom, from walls, floors, tile grout, chairs, shower hoses, bathtub lids, and other bathroom accessories.
▪️After use, the spray bottle can be refilled with the 400g or 650g refill packs.
▪️When storing, always keep upright; do not lay on its side. Read the usage instructions carefully before use. ※1 Does not eliminate all bacteria. Ingredients Sodium hypochlorite, Sodium hydroxide (0.5%), Surfactant (alkylamine oxide), Stabilizer Usage Instructions Usage Method/ ➀ Lift the nozzle stopper (translucent lever) upward to the “ON” position. ※Do not operate while facing your face.
② Spray directly onto mold stains from about 15 cm away. ※Do not spray above eye level. When using on high surfaces like walls or ceilings, apply the liquid using a sponge with a handle or similar tool.
③ After a few minutes, rinse thoroughly with water. ※ For severe mold stains, leaving it on for about 20-30 minutes is effective.
④ After use, lower the nozzle stopper all the way down to the “Stop” position and store upright in a cool, dark place. Always wash hands after use, then wash face and eyes. Usage Guidelines: Spray 8-10 times per square meter. Precautions: Do not use if feeling unwell or if you have heart disease, respiratory disorders, etc. Ensure ventilation by running exhaust fans, opening windows or doors. (Opening two or more is more effective).
Wear rubber gloves, a mask, and protective eyewear/goggles.
Do not use large amounts at once or continuously for long periods.
Never use while bathing.
Avoid getting liquid in your eyes.
Always use alone. Mixing with acidic products, vinegar, alcohol, ammonia, etc., can produce dangerous gases. Do not use for any purpose other than intended. Foreign-made tiles or unit baths may discolor; always test in an inconspicuous area first. If drips remain on the bathtub, discoloration may occur; rinse immediately with water. Avoid contact with clothing or rugs as it may cause fading. Do not transfer to other containers. Avoid dropping to prevent breakage. Keep out of reach of persons with dementia. Keep out of reach of children and pets. This spray bottle is for MOLD KILLER only. Do not add other detergents, bleaches, etc.
Use refill packs for subsequent uses. Be careful of splashing when refilling.
Mold deeply embedded in seals, coatings, etc., becomes harder to remove, so clean promptly.
Brand Name: Johnson
Mold Remover that Quickly Reaches Mold Roots
With unique powerful penetrating ingredients, it works on mold roots in just 5 minutes.
Achieves approximately half the number of sprays and spray time compared to our previous product.
Less hand fatigue makes cleaning large areas like walls and floors easier.
After use, the sprayer can be attached to the 400g or 650g refill bottles.
4901609016606
Johnson Mold Killer Easy Continuous Spray Jet Body 400g 1 Bottle
(text created at , 2025-05-10)
Package
Size (Approx.):
Size (Approx.):
117x57x224 mm
Package
Weight (Approx.):
Weight (Approx.):
493 g
620 JPY (Including Tax)
Stock :
5
Scheduled Shipping:
2026-07-17
Quantity :
Reference Price from Other Stores
