Super Filter with Rectifier Plate - Just Stick It On! Familiar Gray

4901987255178

B0FH1D54J4

74916-001

Toyo Aluminum - Easy-to-Stick Gray - Approx. 64cm x 91cm - Perforated - S5517 <Compatible Models> The following are examples of typical models. Range hoods with air rectifiers up to 60-90cm wide and 64cm deep. *Cannot be installed on models with two air rectifiers. *Depending on the material and condition of the air rectifier or range hood, adhesion may be poor and installation may not be possible. *Do not use on models with unpainted aluminum air rectifiers or range hoods, or models with fluorine-coated or oil-repellent coatings. <Purpose of Use> This product is designed to prevent oil stains on range hoods with air rectifiers. <How to Use> Please refer to the diagram below for proper installation. ○Introduction\
Thoroughly wipe the edges of the air rectifier and range hood to remove oil stains, water leaks, and detergent residue after cleaning. Attach the included hook-and-loop fasteners to the positions marked with

■ on the air rectifier plate (four locations). (There are six hook-and-loop fasteners on one sheet, as shown below.) 1. Adjust the Size Adjust the product to fit the width of your range hood. The perforations make it easy to cut by hand. 2. Attach to the Front Edge Peel off the clear film on the product and attach it to the front edge of your range hood. Adjust the position so that the adhesive part of the product's edge overlaps the left and right edges of the range hood. If your range hood is 90cm wide or you are having trouble attaching it properly, use hook-and-loop fasteners on both sides of the front edge. 3. Attach along the edge of the air rectifier plate Attach along the edge of the air rectifier plate. Tips for Easy Installation Turn on the range hood. Installing the product while applying vacuum to the range hood will ensure a clean application. *If the filter does not stick properly, make sure the adhesive part of the product overlaps the edge of the range hood. *If your range hood has a sensor, cut the sensor part with scissors after installation. *If the adhesive part of the product sticks to the light part of the range hood, cut the light part with scissors. *Replacement *When the replacement indicator becomes clearly visible, it is time to replace the filter. If the replacement indicator starts to fade, it may adversely affect the performance of the range hood itself. *Depending on the model, the indicator may not become visible. *For a 60cm wide range hood *When using two 30cm pieces of the remaining filter: If you purchase two packs of this product, you can use it three times. *Precautions for Use* *When replacing the filter, make sure the stove is off. *Do not use in direct flame. *Do not use in cooking with alcohol such as brandy, sake, or mirin, where there is a possibility of high flames. There is a risk of punctures or oil droplets adhering to the filter catching fire. While we strive for quality, please note that installing this product on a deteriorated or repainted surface may cause discoloration or peeling. According to the Fire Prevention Ordinance, this product must be used at least 1 meter away from cooking appliances such as gas stoves. Do not use it closer than this distance. This product is intended for general household use. Do not use it for commercial or extended use. If the replacement notification indicator appears, replace the filter as soon as possible. Using a dirty filter may clog, reducing ventilation capacity and negatively impacting the performance of the range hood. Even if the replacement notification indicator does not appear, replace the filter approximately every month. The hook-and-loop fasteners cannot withstand long-term use, so be sure to replace them when purchasing a new product. Discoloration of the product may occur depending on storage conditions, but this does not affect its functionality.
▪️Some range hoods with rectifier plates cannot be installed due to their shape. Forcing an installation may significantly impair safety or the range hood's performance, so please read the package instructions carefully before use.
▪️When removing the filter, glue residue may occasionally remain. If this occurs, wipe it off with a mild detergent or a tightly wrung-out cloth.
▪️When disposing of it as waste, follow the regulations of your local municipality.
▪️Do not use for any other purpose. Brand: Toyo Aluminum Echo Products Hook-and-loop fastener (1 sheet) Material: Polyester Size: Approx. 64cm x 91cm Flame-retardant non-woven fabric This product is designed to prevent grease buildup on range hoods with rectifier plates. Its color makes it unobtrusive, even when installed on silver, gray, or black range hoods. It covers the entire intake of the range hood, preventing grease from seeping in and also preventing dirt from getting on the rectifier plate.
▪️The thick filter has high oil absorption, effectively preventing grease stains and ensuring long-lasting use. The perforations allow for easy size adjustment. When the filter becomes dirty, a replacement notification appears, making it easy to see when it's time to replace it. Under the motto "I'm glad I stuck it on. Living a clean life," this filter protects your home from troublesome stains and makes cleaning much easier. As a preventative cleaning item, it offers filters to combat grease stains on kitchen exhaust fans, toilet, dressing room, and bathroom exhaust fans, room vents, and dust on home appliances. 4901987255178 B0FH1D54J4 Super Filter with Rectifier Plate, Easy-to-Stick, Blending Gray. (text created at , 2025-10-04)

242x29x372 mm

60 g